Your Intex cartridge is already in stock in France: order before 1 p.m. and it ships the same day. We sell filters open at both ends for Intex PureSpa inflatable spas, individually or in packs, standard or in an antimicrobial version, as well as socks that trap hair and leaves. From one cartridge to another, it is the height that changes: measure yours using our measuring guide. You can pay by card, PayPal, Apple Pay, cheque or bank transfer.

Manufacturer & Expert

7,000+ References

Fast Shipping

Technical assistance

All Major Brands
Filters for Intex Spas
Your Intex cartridge is already in stock in France: order before 1 p.m. and it ships the same day. We sell filters open at both ends for Intex PureSpa inflatable spas, individually or in packs, standard or in an antimicrobial version, as well as socks that trap hair and leaves. From one cartridge to another, it is the height that changes: measure yours using our measuring guide. You can pay by card, PayPal, Apple Pay, cheque or bank transfer.
6 products
but also with the majority of inflatable spa filters of similar dimensions
MSPA Reference: B9301472
Prevents E1 code risks
Filter not included
Protects your filter during bathing.
Extends the life of your filters.
Compatible with Aquaspa, Ospazia, Hesperide, Alton Family, Mspa filters, etc.
Outer Diameter: 110mm
Length: 200mm
Top: Opening of 52mm
Bottom: Opening of 52mm
Filtration Area: 5m2
- Filter diameter : 107 mm
- Filter height : 76 mm
- Top : open, inner diameter 45 mm
- Bottom : open, inner diameter 45 mm
Spa Filter P52-0001-3
Outer Diameter: 107 mm
Height: 98 mm
Inner Diameter: 43 mm
Top: open
Bottom: open
Set of 2 spa filters compatible with INTEX S1 BlueWater
Outer Diameter: 108mm
Length: 74mm
Top: Opening of 42mm
Bottom: Opening of 42mm
Sold in a pack of 2
How to identify your Intex spa filter
Check the reference printed on your current filter, then find it in the table below. If it is no longer legible, measure the outside diameter, height and central opening.
| Your filter reference | Boospa filter | Dimensions |
|---|---|---|
| Intex 29001 / 11692, Darlly 40064, Darlly EU SC827 | Pack of 2 40064 filters for Intex 29001 | Diameter 107 mm, height 76 mm, opening 45 mm |
| Intex S1 or 29001 | Pack of 2 Intex S1 BlueWater filters | Diameter 108 mm, height 74 mm, opening 42 mm |
| Intex Type A, Darlly 40051, Unicel C-4607, Pleatco PC7-120, Filbur FC-3710, Topology T-4607 | Intex Type A filter (40051) | Diameter 107 mm, height 203 mm, opening 44 mm |
| P52-0001-3 | P52-0001-3 BlueWater filter | Diameter 107 mm, height 98 mm, opening 43 mm |
Reference 29001 is covered by two products. The 40064 pack is a standard filter. The S1 pack is a BlueWater version: its material receives an antimicrobial treatment.
Intex spa filter: top or bottom?
All these filters are open at both ends, with an opening of the same diameter at the top and bottom. For the installation direction specific to your spa, refer to the instructions for your Intex spa.
Compatibility and maintenance
There are many Intex inflatable spa models. Here are some examples from the PureSpa range:
- Pure Spa Bubble
- Octagonal Pure Spa Bubble
- Pure Spa Jet
- Octagonal Pure Spa Jet
This list features a selection of models. Always check your filter reference or dimensions before ordering.
We recommend cleaning your filters at least once a week and replacing them every 2 to 3 months maximum. For cleaning, see our spa filter cleaning products. Each filter is washable: with a pack of 2 filter cartridges, you can keep one replacement cartridge in the spa while cleaning the other.
Can't find your reference? Follow our guide to measuring your spa filter.
Fabrice G.
Article déjà commandé auparavant, permet de garder les filtres un peu plus longtemps
Hervé G.
....
Cyril V.
Très bien conforme
Sylvie M.
Très bien
Elise C.
avons commandé ces chaussette de protection mais les filtres pour spa commandés en meme temps , en comportait deja §
M V.
Bonne dimension
J G.
Pratique et protège bien le filtre
R K.
Passt...
J H.
Conforme à l'original
Anonymous A.
Correct
