WATERWAY
295 products
Quality manufacturing for extended lifespan
Suitable for all heaters, with 2" inlet and outlet diameters
Reduction: Female 63mm to Female 50mm
Allows the conversion from imperial (inch) to metric (mm) system.
Total length: 86mm
Outer diameter top: 45mm
Outer diameter bottom: 16mm
Compatible with Mini Storm size Waterway jets
Waterway reference: 218-6930
Allows you to connect your 3/4-inch piping to a 3/4-inch male fitting
Reference WATERWAY: 872-0300
Also compatible with 3/8" F hose bib outlets
Reference 715-9890
Waterway Reference 400-5161
Made of high-quality ABS
Used to seal a pipe or manifold with a diameter of 1.5 inches (48 mm)
Compatible with PolyStorm size WATERWAY jets
WATERWAY reference: 218-4000
Waterway reference: 715-9860
Reduction: Male 1" (33mm) to Male 3/4" (27mm) barbed, fits inside a 3/4" hose.
Reference Wateway 672-4350
High-quality ABS
Reduction: Male 1" (33mm) to Female 32mm
Allows the conversion from imperial (inch) to metric (mm) system.
Reduction: Female Threaded 2" (78mm) to Male Threaded 2.5" (94mm)
Reference Wateway 672-4660
Made of high-quality ABS
Allows for replacing the lower part of the jet instead of the whole unit
Compatible with Waterway ClusterStorm size jets
Waterway reference: 218-5140
Reduction: Male 2" (60mm) to Male 1.5" (48mm)
Reduction: Female 1" (33mm) to Female 32mm
Allows the conversion from imperial (inch) to metric system (mm)
Reference WATERWAY 400-9230
Adaptable to all filtration and massage pumps.
Heater Union Gasket 2.5"
Quality manufacturing for extended lifespan
Fits all heaters with 2.5" inlet and outlet diameter
Front diameter: 37mm
Embedded area diameter: 28mm
Outer diameter of air inlets: 3/8” (9mm) - smooth tips
Seal and socket included
Allows for replacing the lower part of the jet instead of the whole unit
Compatible with Waterway PowerStorm size jets
Waterway Reference: 218-6610
Used to plug a 3/8 inch diameter outlet on a manifold
Waterway Reference: 715-9870
This part directs the flow within the diverter
Waterway Reference: 602-0960
Reference WATERWAY 400-2017
Compatible with all filtration and massage pumps.
Reduction: Male 1/2" (21mm) to Male 3/4" (20mm fits into the 3/4" hose)
Reference Wateway 419-1920
Reduction: Male 1.5" (48mm) to Male 1" (33mm)
Length: 72 mm
Front diameter: 51 mm
Socket connection diameter: 24.3mm
Socket not included
Mechanical seal for Waterway pumps
Includes: mechanical part (spring) + ceramic part (stator) + seal
WATERWAY Reference: 600-3047
Cap Diameter: 93mm
Pipe Diameter: 2" (60mm)
Reduction: Male 2" (60mm) to Male 3/4" (27mm) fits inside a 3/4" hose.
2" F/F Manifold - 6 x 3/4" M Barb Outlets
Waterway Reference 672-7120
Made of high-quality ABS
The most common pump used in spas sold in France and Europe.
Motor: 56 frame
Power: 2 HP – 1500 W
Without outlet fittings and without connection cable or AMP connector
The most common pump used in spas sold in France and Europe
Motor: 56 frame
Power: 3.2 HP – 2480 W
Supplied without outlet fittings and without connection cable or AMP connector
WATERWAY Reference: 602-3527
Length: 100mm
Compatible with WATERWAY diverters.
56 frames motor.
Dual-speed, 3.5HP
Connection for suction on threaded male fitting: 94mm (2"1/2)
Length: 137 mm
Front diameter (ABS): 127 mm
Sleeve connection diameter: 25-65 mm
External diameter of water inlet: 25mm
Sleeve not included
Reference Wateway 642-3700
Connection: Male / Female
Orientation: 90°
Pipe Dimension: 2.5" (74mm) / 2" (60mm)
Reference Wateway 418-1000
Made of high-quality ABS
David T.
correspond au joint demandé et de bonne qualité
Dragan U.
bien
Sabine E.
Conforme
Laurence J.
Très bien
Laurence J.
Très bien
Christophe G.
Je suis super contente d’avoir pu trouver mes corps de jet sur boospas. Ailleurs c’était impossible merci beaucoup
Stephanie G.
Bon produit
Michel L.
très bien
Dominique B.
----------------(
DYNAMIC S.
PRIX UNITAIRE + ÉLEVÉ QUE CHEZ UN CONCURENT MAIS TRANSPORT - CHER DONC QUANTITE A COMMANDER SUIVANT IMPACT DU COÛT DU TRANSPORT