WATERWAY (page 2)
261 products
Waterway Hi-Flo 640-3250V Main Drain Cover
In white ABS, with screw-in grid and seal
Visible face diameter: 95 mm, hole diameter in the spa shell: 60 mm
Waterway reference: 805-0261
56 frames motor.
Dual-speed, 3.5HP
Connection for suction on threaded male fitting: 94mm (2"1/2)
Reference Wateway 418-1000
Made of high-quality ABS
If you live in the heater clamp ring
Reference Waterway 417-4197
In ABS
Reference Wateway 672-4150
Made of high-quality ABS
Reference Wateway 672-8000
Made of high-quality ABS
Reference Wateway 672-4340
Made of high-quality ABS
Reference Wateway 642-3700
Connection: Male / Female
Orientation: 90°
Pipe Dimension: 2.5" (74mm) / 2" (60mm)
Reference WATERWAY 400-5990
Suitable for all filtration and massage pumps.
Waterway Reference: 502-5050
Connects to the filtration system - top opening
Filter included: 42513
Reduction: Male 1/2" (21mm) to Male 3/8" (14.5mm) barbed fits inside a 3/8" hose.
Waterway reference: 672-4040
2 plugs included
Stainless Steel Air Nozzle for Concrete Spa.
Front Diameter: 38mm
Outer Diameter of Male Connector: 33.5mm
Reference Wateway 672-4680
Made of high-quality ABS
180° Elbow 1.5'' Female / Female
Connection: Female / Female
Orientation: 180°
Pipe Size: 1.5" (48mm)
Connection Type: Male / Female
Pipe Diameter: 2.5" (74mm)
The most common pump used in spas sold in France and Europe
Power: 3.5 HP – 56 frame motor
Outlet fittings and connection cable not included – without plug
Seal kit to repair leaks between the pump body and the motor
Compatible with Waterway SVL56 High Flow, Champion 56 Frame, Executive, Spa-Flo, Iron Might, Hi-Flo Side Discharge, CSA Hi-Flo Side Discharge, Center Discharge, Workman pumps.
For water circuit
Not compatible with a Blower circuit
WATERWAY Reference: 511-1000
Inside Diameter: 158 mm
Outside Diameter: 141 mm
Seal sold separately
Reference Wateway 672-4160
Made of high-quality ABS
Manufacturer reference: 510-1500
Filtration inlet 1.5" (48mm)
Perfectly suited for concrete spas
Compatible with filter 40101 / C-4310 / PWW10 / FC-3077
Reference Wateway 672-0410
Made of high-quality ABS
Outer diameter: 17mm
Inner diameter: 11-12 mm
Thickness: 2.4mm
Reference Wateway 672-4250
Made of high-quality ABS
Manufacturer reference: 602-0420
Compatible with Waterway top access valves in ¾" and 1" sizes.
Manufacturer reference: 602-0750
Height: 95mm - Outer diameter: 27mm (3/4")
Manufacturer reference: 643-4250
Main drain cover for spa
Diameter: 90mm
Gasket not included
Power: 1/8 HP – 230 V – 60 Hz – 48-frame motor
Maximum flow rate: 190 liters per minute
Outlet fittings and connection cable not included
Manufacturer Reference: 510-1500
Filtration inlet in 1.5" (48mm)
Perfectly suited for concrete spas.
Compatible with filter 40101 / C-4310 / PWW10 / FC-3077
Reference Waterway 672-7110
Made of high-quality ABS
Waterway Reference: 413-2180
Release air from your piping by removing its cap
Diameter: 60 mm
Gasket + cap included
Reference Wateway 672-4110
Made of high-quality ABS
Perfectly suited for concrete spas.
Filter not included.
Compatible with Waterway's 2 Filter 100Sq skimmers
Manufacturer reference: WATERWAY 3312620-14EU
Power: 0.28 HP – 200 W – 1/16 HP
Outlet fittings not included
Includes 2-wire connection cable
Connection Type: Male
Pipe Diameter: 3/4" (27mm)
Motor 56 frames.
Single speed, 3HP
Suction connection on male threaded fitting: 78mm (2")
WATERWAY Reference: 500-1000B
Compatible with Top Load filter cartridges
Inner diameter on threaded side: 175 mm
Outer diameter: 190 mm
56 frames motor.
Single speed, 2HP.
Suction connection on male threaded fitting: 78mm (2")
This kit includes: tee socket, classic socket, wall mounting bracket, and retaining ring
Specially designed for built-in spas
Air inlet: int. ø 48mm, connection F with 1.5" hose
Water inlet: int. ø 60mm, connection F with 2" hose
Noe R.
Produit robuste
Philippe S.
Très bon rapport qualité/prix
Dylan M.
Raccord correct sans vous je pense que j’aurais pas su le réparer
Anonymous A.
Perfekt 100%
Anonymous A.
Perfekt 100%
Nicolas B.
Produit d'origine
Jean-François J.
okok
Eric B.
tre bien
Christian P.
Ne convient pas a mon spas lamelight
Eric F.
Parfait, pièce montée sans problème