WATERWAY
295 products
Quality manufacturing for extended lifespan
Suitable for all heaters, with 2" inlet and outlet diameters
Reduction: Female 63mm to Female 50mm
Allows the conversion from imperial (inch) to metric (mm) system.
Total length: 86mm
Outer diameter top: 45mm
Outer diameter bottom: 16mm
Compatible with Mini Storm size Waterway jets
Waterway reference: 218-6930
Allows you to connect your 3/4-inch piping to a 3/4-inch male fitting
Reference WATERWAY: 872-0300
Also compatible with 3/8" F hose bib outlets
Reference 715-9890
Used to seal a pipe or manifold with a diameter of 1.5 inches (48 mm)
Waterway Reference 400-5161
Made of high-quality ABS
Compatible with PolyStorm size WATERWAY jets
WATERWAY reference: 218-4000
Waterway reference: 715-9860
Reduction: Male 1" (33mm) to Male 3/4" (27mm) barbed, fits inside a 3/4" hose.
Reduction: Male 1" (33mm) to Female 32mm
Allows the conversion from imperial (inch) to metric (mm) system.
Reference Wateway 672-4350
High-quality ABS
Reduction: Female Threaded 2" (78mm) to Male Threaded 2.5" (94mm)
Reference Wateway 672-4660
Made of high-quality ABS
Allows for replacing the lower part of the jet instead of the whole unit
Compatible with Waterway ClusterStorm size jets
Waterway reference: 218-5140
Reduction: Female 1" (33mm) to Female 32mm
Allows the conversion from imperial (inch) to metric system (mm)
Reduction: Male 2" (60mm) to Male 1.5" (48mm)
Heater Union Gasket 2.5"
Quality manufacturing for extended lifespan
Fits all heaters with 2.5" inlet and outlet diameter
Reference WATERWAY 400-9230
Adaptable to all filtration and massage pumps.
Front diameter: 37mm
Embedded area diameter: 28mm
Outer diameter of air inlets: 3/8” (9mm) - smooth tips
Seal and socket included
Used to plug a 3/8 inch diameter outlet on a manifold
Waterway Reference: 715-9870
Allows for replacing the lower part of the jet instead of the whole unit
Compatible with Waterway PowerStorm size jets
Waterway Reference: 218-6610
Reference WATERWAY 400-2017
Compatible with all filtration and massage pumps.
This part directs the flow within the diverter
Waterway Reference: 602-0960
Reduction: Male 1.5" (48mm) to Male 1" (33mm)
Reduction: Male 1/2" (21mm) to Male 3/4" (20mm fits into the 3/4" hose)
Reference Wateway 419-1920
Length: 72 mm
Front diameter: 51 mm
Socket connection diameter: 24.3mm
Socket not included
Mechanical seal for Waterway pumps
Includes: mechanical part (spring) + ceramic part (stator) + seal
WATERWAY Reference: 600-3047
Cap Diameter: 93mm
Pipe Diameter: 2" (60mm)
2" F/F Manifold - 6 x 3/4" M Barb Outlets
Waterway Reference 672-7120
Made of high-quality ABS
Reduction: Male 2" (60mm) to Male 3/4" (27mm) fits inside a 3/4" hose.
The most common pump used in spas sold in France and Europe.
Motor: 56 frame
Power: 2 HP – 1500 W
Without outlet fittings and without connection cable or AMP connector
The most common pump used in spas sold in France and Europe
Motor: 56 frame
Power: 3.2 HP – 2480 W
Supplied without outlet fittings and without connection cable or AMP connector
Manufacturer reference: 715-1001
WATERWAY Reference: 602-3527
Length: 100mm
Compatible with WATERWAY diverters.
56 frames motor.
Dual-speed, 3.5HP
Connection for suction on threaded male fitting: 94mm (2"1/2)
Length: 137 mm
Front diameter (ABS): 127 mm
Sleeve connection diameter: 25-65 mm
External diameter of water inlet: 25mm
Sleeve not included
Waterway reference: 805-0261
Pascal R.
Bon joint mais pas les bonnes cotes pour mon utilisation.
PIERRE B.
Correspond bien à se que je voulais
PIERRE B.
Correspond à la pièce deffectueuse que je devais changer
Vincent R.
Matériel conforme à la demande
Sofiane B.
3/4M 3/8F
Sofiane B.
Comme annoncé
David R.
Nickel
Jean-Michel O.
Rien à dire, comme d’habitude
Laurent S.
Pompe impeccable rien à dire
Guy V.
Conforme à ma recherche