The Waterway Executive Euro pump is undoubtedly the most common and reputable pump found in spas sold in France and Europe. This pump features an Italian EMG electric motor, known for its silence and reliability.
It has been used by top spa brands such as Jacuzzi, Hotspring, and Caldera.
This is the 56 Frame version corresponding to the motor size. This pump is different from the 48 Frame version, which is smaller. The manufacturer increased the motor size to make it more robust and reliable. It is essential to correctly identify the chassis of your WATERWAY Executive Euro pump.
This product sheet presents the Bi-speed models.
Specifications of the Executive Euro pump - WATERWAY- High-performance spa massage pump manufactured by the renowned brand Waterway (USA)
- Highly reliable Italian EMG motor
- 2 double shielded ball bearings, moisture-resistant with grease for quieter operation and extended lifespan
- 2-speed motor for increased efficiency
- Capacitor (start and stop) for lower energy consumption (2HP: 25µF / 3HP: 40µF)
- Motor protection
- Manufactured IPX5
- Suction connection on 78mm male threaded fitting (94mm optional)
- Discharge connection on 78mm male threaded fitting
Summary of available Executive Euro models in 56 Frame:
Single-speed:- 2HP (1500 watts)
- Suction 78mm: PF-20-1N22X replaces reference 3R10850-OD
- Suction 94mm: PF-20-1N22X25
- 2.5HP (2000 watts)
- Suction 78mm: PF-25-1N22X (Obsolete: replaced by the 3HP model)
- 3HP (2250 watts)
- Suction 78mm: PF-30-1N22X replaces references 3R11250-0D or PF-30-1N22C4
- Suction 94mm: PF-30-1N22X25
Bi-speed:
- 2HP (1500 watts)
- Suction 78mm: PF-20-2N22X replaces reference 3R20850-0D
- Suction 94mm: PF-20-2N22X25
- 3.2HP (2480 watts)
- Suction 78mm: PF-25-2N22X replaces reference PF52N22X (We recommend opting for the slightly more powerful 3.5HP model)
- 3.5HP (2710 watts)
- Suction 78mm: PF-30-2N22X replaces references 3R21050-0D or PF522N25X or PF-30-2N22C
- Suction 94mm: PF-30-2N22X25 replaces reference PF52-N25X-25SP
Technical diagrams
DIMENSIONS:
Pipe connections
Delivered without outlet fittings You can also reuse your old pipe fittings if they are still functional. If your piping differs, access our range of
Pump Unions and Fittings to find the fitting that matches your piping.
The pump body is adjustable to fit your piping. You can have the discharge on the left or right based on your setup. Simply unscrew the 4 motor screws to turn your pump body in the desired direction. Then, reposition the screws.
Electrical connection
The pump is supplied without a connection cable or plug. You can keep your old cable to connect this new pump. If your plug is no longer usable, you can opt for new plugs in our
Spa Cables and Plugs section.
Here are the most commonly used Plugs in the Spa industry: |  |
| AMP Plug | J&J Plug (PIN positions vary depending on the device) |