The "Inflatable Spa Parts" category on our website offers replacement parts for various inflatable spa manufacturers, including inflatable spa filters and accessories to maintain your inflatable spa.
Inflatable spas
The "Inflatable Spa Parts" category on our website offers replacement parts for various inflatable spa manufacturers, including inflatable spa filters and accessories to maintain your inflatable spa.
- Best Seller
- Best Seller
- Best Seller
- Best Seller
- Best Seller
- Best Seller
249 products
MSPA
Set of 2 filters for MSPA inflatable spas
Filter diameter: 107 mm
Filter height: 68.5mm
Top: open, inner diameter 32mm
Bottom: open, inner diameter 55mm
10,80 €
In stock
MSPA
Pressure gauge for MSPA inflatable spa
Compatible with all MSPA inflatable spas
MSPA reference: B9300637
Compatible with all MSPA inflatable spas
MSPA reference: B9300637
23,00 €
In stock
MSPA
Inflation valve + cap for Mspa spas
Reference MSPA: B0800016
Compatible with all generations of MSPA spas
Not compatible with the Tuscany model
14,40 €
In stock
MSPA
Set of 6 filters for MSPA inflatable spas
Filter diameter: 107 mm
Filter height: 68.5mm
Top: open, inner diameter 32mm
Bottom: open, inner diameter 55mm
26,40 €
In stock
MSPA
Spa Mspa Bubble Suction Nozzle
Compatible with all generations of Bubble spas
Compatible with all generations of Bubble spas
12,00 €
In stock
MSPA
Drain plug for Mspa spas
MSPA Reference: B9300171
Compatible with all generations of MSPA spas
Not compatible with the Tuscany model
MSPA Reference: B9300171
Compatible with all generations of MSPA spas
Not compatible with the Tuscany model
12,00 €
In stock
AQUASPA
Inner drain plug
for Aquaspa, Ospazia, Becool II, Alton family, Hespéride, Lumix, Infinite Spa hot tubs
To be attached at the bottom of your inflatable spa.
You will receive one of the 2 versions depending on stock availability (see photos) - Same dimensions.
for Aquaspa, Ospazia, Becool II, Alton family, Hespéride, Lumix, Infinite Spa hot tubs
To be attached at the bottom of your inflatable spa.
You will receive one of the 2 versions depending on stock availability (see photos) - Same dimensions.
19,00 €
In stock
AQUACHECK
Water analysis strips for 6 in 1 spa.
Aquachek reference: AQC-470-0030
50 strips to analyze your Spa water.
Allows you to monitor total chlorine, total bromine, free chlorine, alkalinity, pH, and total water hardness.
50 strips to analyze your Spa water.
Allows you to monitor total chlorine, total bromine, free chlorine, alkalinity, pH, and total water hardness.
19,00 €
In stock
In stock
In stock
MSPA
MSPA Filter Adapter with Peg
MSPA Reference: B9301402
Adapter that allows the use of MSPA filters. Compatible spa models are those with two connections to their motor block (one for water return and one for suction (where you place your filter).
MSPA Reference: B9301402
Adapter that allows the use of MSPA filters. Compatible spa models are those with two connections to their motor block (one for water return and one for suction (where you place your filter).
10,00 €
In stock
AQUASPA
Heater Block + Circulation Pump for Inflatable Spa
Ospazia, Aquaspa, Sunbay, Bcool II, Lumix, Infinite Spa...
To be installed inside the motor block.
For spas from 2010
Ospazia, Aquaspa, Sunbay, Bcool II, Lumix, Infinite Spa...
To be installed inside the motor block.
For spas from 2010
69,00 €
In stock
MSPA
Transformer for MSPA LITE spa
Compatible with the LITE spa generation
79,00 €
In stock
AQUASPA
Spa Thermal Heater
Double resistance - Increased reliability
To be installed inside the motor block
Power: 1800W
NOT compatible with spas equipped with old single resistance heaters
Double resistance - Increased reliability
To be installed inside the motor block
Power: 1800W
NOT compatible with spas equipped with old single resistance heaters
59,00 €
In stock
BOOSPA FILTER
Replacement Filter for MSPA Inflatable Spa - BlueWater® Filtration
Anti-microbial Filtration
Diameter: 11 cm
Height (including tabs): 12.1 cm
Height (excluding tabs): 10.6 cm
Top: Closed
Bottom: Open, diameter 7.5 cm
Anti-microbial Filtration
Diameter: 11 cm
Height (including tabs): 12.1 cm
Height (excluding tabs): 10.6 cm
Top: Closed
Bottom: Open, diameter 7.5 cm
15,00 €
In stock
GONDO
Manufacturer reference: 6011
Electronic pH tester. Essential for all spa or pool owners. Instant reading and easy to use.
42,00 €
In stock
BOOSPACLEAN
Connects directly to your water jet.
Its "comb" shape and 10 unidirectional jets provide a deep cleaning experience.
14,40 €
In stock
MSPA
This protective sock is compatible with all MSPA filters
but also with the majority of inflatable spa filters of similar dimensions
MSPA Reference: B9301472
Prevents E1 code risks
Filter not included
but also with the majority of inflatable spa filters of similar dimensions
MSPA Reference: B9301472
Prevents E1 code risks
Filter not included
14,00 €
In stock
MSPA
This MSPA kit is compatible with MSPA inflatable spas having only one outlet on the inner wall of the pool.
MSPA Reference: B9301467
Prevents E1 error risks
This kit includes: 1 MSPA filter, 1 protective sock, and 1 return/suction nozzle
MSPA Reference: B9301467
Prevents E1 error risks
This kit includes: 1 MSPA filter, 1 protective sock, and 1 return/suction nozzle
12,00 €
In stock
BOOSPA
Floating dispenser for pool and spa.
Equipped with a clamping ring to adjust the diffusion of bromine or chlorine.
Retractable tablet compartment.
8,90 €
In stock
TOPOLOGY
Outer diameter: 105 mm
Height: 80 mm
Top: 55mm opening
Bottom: 55mm opening
14,00 €
In stock
BOOSPA
Rechargeable Electric Vacuum 0e639
For spas and small above-ground pools
Extendable handle up to 160 cm
Battery life: 60 min
89,00 €
In stock
AQUASPA
Circulation pump for Ospazia, Aquaspa, Bcool II, Lumix, Infinite Spa..
To be installed inside the motor block.
For spas from 2010
69,00 €
In stock
MSPA
Backflow Nozzle for MSPA Spa Bubble
Compatible with all generation of MSPA Bubble spa
9,60 €
In stock
MSPA
Check valve for ozone injector
This check valve is installed on the air hose that connects the ozonator to the ozone injector. Connects to a 1/2" hose.
Compatible with MSPA Lite 2015 premium spas and MSPA premium spas
Diameter +: 19 mm
Diameter -: 5 mm
9,60 €
In stock
MSPA
Drainage Adapter for MSPA Spa
Compatible with all generations of MSPA spas
Allows you to connect your drainage nozzle to a garden hose.
Compatible with all generations of MSPA spas
Allows you to connect your drainage nozzle to a garden hose.
24,00 €
In stock
MSPA
Elite / Premium / Lite 2015 Heater for MSPA Inflatable Spas
Compatible with MSPA spas of the PREMIUM / ELITE / LITE 2015 generation.
Compatible with MSPA spas of the PREMIUM / ELITE / LITE 2015 generation.
1500W
MSPA Reference: B9301195
MSPA Reference: B9301195
Equipped with an earthing plug
96,00 €
In stock
MSPA
Manufacturer reference: M1801-PB
Compatible MSPA motor block: Delight, Comfort Lite (generation from 2020)
Compatible with MSPA Europe spas only
129,00 €
In stock
LIFE
Manufacturer reference: LSS220
Inflatable booster seat equipped with 4 suction cups for spas.
Can be filled with water using a standard garden hose.
16,00 €
In stock
MSPA
Manufacturer reference: B9301597
Attention, the circuit board is sold separately
60,00 €
In stock
MSPA
Plug equipped with a pressure gauge for MSPA Delight inflatable spa
MSPA Reference: B9301394
This plug allows you to measure the air pressure in your spa
Compatible with all MSPA Delight spas
Seal included
MSPA Reference: B9301394
This plug allows you to measure the air pressure in your spa
Compatible with all MSPA Delight spas
Seal included
18,00 €
In stock
MSPA
Seal for MSPA Lite pump
Positioned between the pump and the heater
Compatible only with MSPA Lite spas
MSPA Reference: B9301053
Positioned between the pump and the heater
Compatible only with MSPA Lite spas
MSPA Reference: B9301053
Outer diameter: 32 mm
7,00 €
In stock
AQUASPA
Electronic board located behind the keyboard included
Keyboard dimensions: 128 mm x 84 mm
Color: red
Compatible with brands: Alton Family, Aquaspa, Bcool 2, Bcool III, Garden Allstore, Hesperide, Sunbay.
Keyboard dimensions: 128 mm x 84 mm
Color: red
Compatible with brands: Alton Family, Aquaspa, Bcool 2, Bcool III, Garden Allstore, Hesperide, Sunbay.
75,00 €
In stock
AQUASPA
Protective sock for inflatable spa filter.
Protects your filter during bathing.
Extends the life of your filters.
Compatible with Aquaspa, Ospazia, Hesperide, Alton Family, Mspa filters, etc.
Protects your filter during bathing.
Extends the life of your filters.
Compatible with Aquaspa, Ospazia, Hesperide, Alton Family, Mspa filters, etc.
19,00 €
In stock
MSPA
Compatible with MSPA Bubble premium generation spas
ATTENTION, NEW PUMP DESIGN BUT STILL COMPATIBLE
109,00 €
In stock
BOOSPA
Spa booster seat
Fills with water to desired height
Material resistant to heavy loads and heat
Fills with water to desired height
Material resistant to heavy loads and heat
11,50 €
In stock
AQUASPA
Inflation valve + cap for inflatable spa
Compatible with Ospazia, Aquaspa, Bcool II, Alton Family, Hesperide, Sunbay spas.
Compatible with Ospazia, Aquaspa, Bcool II, Alton Family, Hesperide, Sunbay spas.
17,00 €
In stock
MSPA
Temperature sensor for MSPA New 2 + / LITE / Premium spa
Compatible with New 2 + / LITE / Premium spa generations
MSPA reference: B9300983
Compatible with New 2 + / LITE / Premium spa generations
MSPA reference: B9300983
19,00 €
In stock
AQUASPA
Flow sensor for inflatable spa
Compatible with many brands of inflatable spas
Seal not supplied, the product remains compatible.
39,00 €
In stock
BOOSPA
Boospa manual vacuum for your spa.
Manual operation with a pump that sucks up debris.
Integrated filter, brush, and wide nozzle included.
42,00 €
In stock
- Best Seller
BOOSPACLEAN
BoospaClean Range by Boospa.
1kg Box - 20g slow-dissolving tablets.
Effective at high pH and temperature.
Chlorine alternative.
21,90 €
In stock
MSPA
Clip-on Cover for Square Inflatable MSPA Spa
Thermally insulating protection attachable with clips.
Protects and retains heat in your spa.
6-seater model for square spas
109,00 €
Restocking in progress
MSPA
Manufacturer reference: B9301544 / B9301426
Dimensions: 170 x 95 mm
Equipped with a UVC touch
109,00 €
In stock
BOOSPA
AquaspaDimensions:
Height: 83 mm
Diameter: 104 mm
Inner thread diameter #1: 60 mmInner thread diameter #2: 31mm
22,00 €
In stock
AQUASPA
Transformer for inflatable spas Aquaspa, Ospazia, Hesperide, Be Cool 2, Sunbay..
To be installed inside the motor block.
Input: 240V - 50Hz - 0.3A
To be installed inside the motor block.
Input: 240V - 50Hz - 0.3A
Output: 11.6V - 3.3A
58,50 €
In stock
MSPA
Replacement pump + heater pack for MSPA spa
Compatible with MSPA Gen2, Gen2+, and New2+ motor blocks
Includes pump, heater, and union gasket
Compatible with MSPA Gen2, Gen2+, and New2+ motor blocks
Includes pump, heater, and union gasket
134,00 €
In stock
AQUASPA
Drain plug for inflatable spa
Compatible with Ospazia, Aquaspa, Bcool II, Sunbay, Hespéride, Lumix, Infinite Spa, and more..
Compatible with Ospazia, Aquaspa, Bcool II, Sunbay, Hespéride, Lumix, Infinite Spa, and more..
19,00 €
In stock
MSPA
White PVC inflatable spa cover for MSPA inflatable spas.
For 4-person or 6-person spas.
69,00 €
In stock
We have a complete selection of quality inflatable spa parts to help you maintain your spa in good working order. Whether you are looking for replacement parts for a specific model or accessories to enhance your relaxation experience, we have everything you need. Browse our site now to explore our range of inflatable spa products.
Frédéric C.
Parfait
Frédéric C.
Parfait
Nathalie N.
Parfait
Frédéric C.
Parfait
Frédéric C.
Parfait
Frédéric C.
Parfait
Herve R.
conforme
Claude L.
Conforme
Maimouna C.
Parfait
Ghislaine C.
Aucun problème de compatibilité avec notre SPA, produit conforme à notre attente, parfait !