Looking for a spa heater? Explore our full range of in-stock spare parts for heating your spa water, compatible with many different spa brands and models. We offer a wide selection of heaters, resistors, and temperature sensors suitable for your spa, all while providing fast delivery.
Manufacturer & Expert
7,000+ References
Fast Shipping
Technical assistance
All Major Brands
Heating
Looking for a spa heater? Explore our full range of in-stock spare parts for heating your spa water, compatible with many different spa brands and models. We offer a wide selection of heaters, resistors, and temperature sensors suitable for your spa, all while providing fast delivery.
240 products
In stock
In stock
In stock
HYDROQUIP
Compatible with Balboa GS / GL2000 - GL2001 / BP series
Power: 3.0 kW
Included: 2" fitting (60 mm)
Hydroquip Reference: 58118
Can directly replace Balboa heater reference 58107
174,00 €
In stock
WATERWAY
2" Heater Union Gasket
Waterway Reference 400-5161
Made of high-quality ABS
Waterway Reference 400-5161
Made of high-quality ABS
14,00 €
In stock
AQUASPA
Double resistance - Increased reliability
To be installed inside the motor block
Power: 1800W
NOT compatible with spas equipped with old single resistance heaters
48,00 €
In stock
TECMARK
Pneumatic Switch
Reference: TBS135A
Allows turning on/off a device.
5A resistive / 250 VAC - 2A inductive / 250 VAC
Reference: TBS135A
Allows turning on/off a device.
5A resistive / 250 VAC - 2A inductive / 250 VAC
18,00 €
In stock
BALBOA INSTRUMENTS
Compatible with Balboa M7 heaters and controls systems
The most common sensor
Reference: 30344
32,00 €
In stock
139,00 €
In stock
JOYONWAY
Compatible with P20B29, P25B37, and P23B32 series.
Power: 3 kW
Includes: 2" (60 mm) fitting
Joyonway reference: H001
139,00 €
Restocking in progress
In stock
In stock
JOYONWAY
Power of 3kW
Is compatible with Joyonway's P20B29 P23B32 P25B37 heaters
59,00 €
In stock
AQUASPA
Flow sensor for inflatable spa
Compatible with many brands of inflatable spas
Seal not supplied, the product remains compatible.
18,00 €
In stock
JOYONWAY
Suitable for 2-inch pipes (outer diameter) Thread diameter: 78mm 1 grooved gasket included
15,00 €
In stock
BALBOA INSTRUMENTS
Compatible with Balboa M7 heaters and controls systems
The most common sensor
Reference: 30344
28,00 €
In stock
ETHINK
Temperature sensor ETHINK for KL8 series housing
2-pin connector to be connected to the electronic board
2-pin connector to be connected to the electronic board
29,00 €
In stock
GECKO
Gecko Dtec 2 PSI Pressure Switch
Compatible with Gecko 2 kW SSPA heater
Compatible with Gecko 3 kW Universal heater
Replaces the discontinued Gecko Dtec 1.8 PSI pressure switch
Compatible with Gecko 2 kW SSPA heater
Compatible with Gecko 3 kW Universal heater
Replaces the discontinued Gecko Dtec 1.8 PSI pressure switch
55,00 €
In stock
LX
Union Fitting + Heater Outlet Tightening Ring 1.5''
Thread Diameter: 62 mm
Inner Diameter for Hose Connection: 48 mm or 50 mm (choose one)
Thread Diameter: 62 mm
Inner Diameter for Hose Connection: 48 mm or 50 mm (choose one)
14,50 €
In stock
TECMARK
Pressure switch TeckMark Model 3902 or 3903
Compatible with heaters:
Gecko 2kW SSPA
Gecko 3kW Universal
Compatible with heaters:
Gecko 2kW SSPA
Gecko 3kW Universal
36,00 €
In stock
JOYONWAY
Joyonway Temperature Sensor
Connects to the electrical board of the Joyonway spa control system via a two-pin connector.
Connects to the electrical board of the Joyonway spa control system via a two-pin connector.
39,00 €
Restocking in progress
18,00 €
Restocking in progress
JOYONWAY
Compatible with the Joyonway P15B66 control box
Power: 3 kW
Includes: split nuts and gaskets
Joyonway Part Number: H002-230A
169,00 €
In stock
LX
Heater DH30-RI
Power 3KW
Pipe diameter 1 1/2"
129,00 €
In stock
BOOSPA
Included: 1 tightening ring for 2" heater + its female part towards 1.5" pipe
Thread diameter: 78 mm
Female outlet diameter: 48 mm
O-ring included
Attention, the 2 screws to fix the 2 parts of the ring are not included
7,20 €
In stock
CALDERA SPAS
Flow Switch 73995 for Caldera® Spas
Caldera® References - WATKINS: 73995
Caldera® References - WATKINS: 73995
120,00 €
In stock
In stock
SUNDANCE SPAS™
Temperature sensor for Sundance Spa® and Jacuzzi®
Curl finger connection
Reference 6600-166
75,00 €
In stock
BALBOA INSTRUMENTS
Hi Limit Temperature Sensor for Balboa M7 system heaters
Reference Balboa 30382 or 32016
Compatible with all Balboa heaters including M7 technology including Value and LE
35,00 €
In stock
DAVEY
Heater Union Fitting 2'' Outlet
Thread Diameter: 80 mm
Inner Pipe Connection Diameter: 60 mm
Allows you to connect your Spa Power heater to the piping.
Allows you to connect your Spa Power heater to the piping.
46,20 €
In stock
AQUASPA
Inflatable spa temperature sensor for Alton Family, Aquaspa, Bcool 2, Bcool II, bespa, Garden Allstore, Hesperide, Losiane, Ospazia, Spark, Sunbay, Water Health
Sensor length: 25 mm
Sensor length: 25 mm
16,80 €
In stock
SUNDANCE SPAS™
Temperature sensor for Sundance Spa® and Jacuzzi®
Box end connection
Reference 6600-167
Box end connection
Reference 6600-167
114,00 €
In stock
DAVEY
Q915441AC Optical Flow Sensor
Reference: Q915441AC
Compatible with SpaPower systems: SP600, SP750, SP800, SP1000, and SP1200
Reference: Q915441AC
Compatible with SpaPower systems: SP600, SP750, SP800, SP1000, and SP1200
45,60 €
In stock
BALBOA INSTRUMENTS
BALBOA Heater 3.0 kW 240V
The Titanium version of the 58118 heater
Compatible with GS/GL2000 series
The Titanium version of the 58118 heater
Compatible with GS/GL2000 series
259,00 €
In stock
ASTREL
Temperature sensor and HL ASTREL 10A546A003
The sensor serves two functions: temperature and overheat protection
It connects to the electronic board of the ASTREL control system.
72,00 €
In stock
TECMARK
Pressure Switch TECMARK 3158-EN
Equips the Balboa 2kW and 3kW heaters that use a pressure switch
Balboa Reference: 30408
It replaces the Pressure Switch TECMARK 3158-EJ
Equips the Balboa 2kW and 3kW heaters that use a pressure switch
Balboa Reference: 30408
It replaces the Pressure Switch TECMARK 3158-EJ
45,00 €
In stock
BALBOA INSTRUMENTS
Heater 58320 2.9 kW angled
Titanium resistance
Power: 2.9kW
Reference Caldera/Hotspring®: 1076701
Titanium resistance
Power: 2.9kW
Reference Caldera/Hotspring®: 1076701
276,00 €
In stock
WATERWAY
If you live in the heater clamp ring
Reference Waterway 417-4197
In ABS
8,00 €
In stock
BALBOA INSTRUMENTS
Balboa M7 Sensor Gland
Allows you to mount the M7 sensor on your heater while maintaining its waterproof seal.
Allows you to mount the M7 sensor on your heater while maintaining its waterproof seal.
15,90 €
In stock
139,00 €
In stock
DAVEY
SpaPower Q915439 Temperature Sensor
Reference: Q915439
Compatible with SpaPower DAVEY systems: SP400, SP500, QP600, SP800, and SP1200.
Reference: Q915439
Compatible with SpaPower DAVEY systems: SP400, SP500, QP600, SP800, and SP1200.
32,00 €
In stock
In stock
LX
Union Fitting + Heater Outlet Tightening Ring 1.5''
Thread Diameter: 62 mm
Inner Diameter for Hose Connection: 50 mm
14,50 €
In stock
48,00 €
In stock
BALBOA INSTRUMENTS
Balboa Reference: 58504
Heating Element Type: Incoloy 800
Fittings not included
Heating Element Type: Incoloy 800
Fittings not included
149,00 €
In stock
BALBOA INSTRUMENTS
BALBOA Heater 58433 3kW M7
Power: 3kW - 4.02 HP
Pipe Diameter: 2" (fittings included)
Flow Rate: 75L / min
Power: 3kW - 4.02 HP
Pipe Diameter: 2" (fittings included)
Flow Rate: 75L / min
205,00 €
In stock
29,00 €
In stock
29,00 €
In stock
We offer a wide selection of quality components and accessories for your spa heating systems. Whether you are looking for a replacement electronic heater, a thermostat, a temperature regulator, or any other product related to heating your spa, we have what you need.
Our catalog includes products from reliable and well-known brands in the industry, providing optimal performance and durability for your hot tub. Know that the heating elements of your spa can be replaced or repaired without the need to completely change your hot tub!
Spa Heater: One of the Most Important Elements
The spa heater is the most essential element for your comfort. It is a device that maintains the water temperature of your spa at a constant and comfortable level. It is usually electrically powered and can be controlled using a thermostat or temperature regulator. Spa heaters are often installed inside the spa itself and can be integrated into the filtration system. Heaters can vary in size and heating capacity depending on the size and capacity of your spa, so feel free to contact us to ensure you have the most suitable equipment for your hot tub!
Claude B.
Parfait cela correspondait parfaitement à mon besoin.
Josef P.
Sehr Gut, passt genau . DANKE
Patrick L.
Produit conforme à l'original qui datait de 17 ans le prix est conséquent espérons qu'il fonctionne aussi longtemps que celui d'origine
Jean-Francois G.
Ce réchauffeur est équipé de 2 cables qui font 1 mètre de long, ils sont trop courts.
Louis G.
Conforme
Teodor Z.
Perfect
Rachid B.
Pièce qui semblé avoir été stocké dans un lieu humide. Des traces vert d humidité sur la piece. Déçu par cette commande.
Jonathan K.
Reçu rapidement, j'ai pu réparer mon SPA moi-même avec les conseils du service technique. Merci au support Boospa. je recommande
J C.
Matériel avec prix raisonnable, mais pas une grande longévité. Dommage
Denis F.
Bien, je suis content(e).