Heating (page 3)
240 products
Pipe diameter: 48mm or 50mm
Balboa Reference: 50145
Compatible with GS and GL control systems
Length: 175mm
Distance between studs: 33mm
Compatible with Artic Spas heaters
This heater replaces the following models:
PFEAR3110000; PFEAR3300000; PFEAR3200000; PFEAR3210000
Power: 2000W - single-phase
Features a dual sensor (hi-limit and temperature)
Equipped with a Titanium heating element
For pipes with an outer diameter of 60mm (2")
Power 3KW
Pipe diameter 1 1/2"
Hi-limit switch reference: KSD302R
Allows cutting off power to the heater in case of overheating.
Astrel Reference: PFEAT3110000
This heater replaces the following models:
PFEAR2110000; PFEAR2300000; PFEAR2200000; PFEAR2210000
Power: 3000W - single-phase
Features a dual sensor (hi-limit and temperature)
Equipped with a Titanium heating element
For pipes with an outer diameter of 60mm (2")
Power of 3Kw
BALBOA Reference: 58133
This part controls the heating temperature of the heater
Heater for Gecko IN.YJ-V3 system
Manufacturer part number: 0613-421011
Resistance type: Incoloy 800
Power: 3000 W
Heating length: 380 mm
Total length (with union): 490 mm
Internal diameter: 60 mm
The ideal solution for heating your spa
For durability, energy efficiency, and reduced environmental impact
Dimensions: 396 x 286 x 363mm
Non-reversible heat pump
2-pin connector to be connected to the electronic board
GECKO IN.THERM Heater 2kW / 3.8kW / 4kW
Compatible with GECKO control boxes series IN.XE and IN.XM
4kW model replaced by the 3.8kW model
Made of white ABS - Supplied with gasket
Adaptable to all threaded locking rings of 78mm.
Allows connection of 1.5'' pipes (48mm)
Only compatible with older PEIPS control systems
Allows for connecting the temperature probe to the electronic board
Compatible with BP2100, BP6013, and BP601 series.
Balboa Reference: 59081
Power: 3Kw
Boospa Ref: A-000000-0c361
Therm Product Ref: E2300-0126ET, E2300-1027ET(X), E2300-0012
Hydroquip Ref: 27-V310-4T-K
Compatible with GL8000 control systems.
Copper Strip 30511 for BALBOA Heater
Compatible with BALBOA systems prior to 2008
Balboa Reference: 58112
Compatible with GS and GL control systems
Reference 6600-110
Reference: III-FL-M-sensor
Compatible only with PEIPS® III-FL-M systems
MSPA Reference: B9301762
Front diameter: 13 mm
Screw thread diameter: 9.5 mm
Sensor housing: 7mm
Bimetallic contactor reference: KSD302
Allows cutting off the power supply to the heater in case of overheating
Titanium resistance
Power: 2.7kW
Sundance® Reference: 6500-062
2-pin female connector to be connected to the electronic board
Compatible with Astrel control systems.
As the heater is no longer manufactured, this is an equivalent model. Its substitute product is also the 26-C3480-1-7T-K heater.
Reference: IV-sensor
Compatible only with PEIPS® IV-PLS systems
Power: 6Kw
Boospa Ref: A-000000-05923
Therm Product Ref: C3160 / C3564-1
Hydroquip Ref: 26-C3160-1S
Hotspring Ref: 73790 - 72795 - 76227
Flow sensor for LX heater.
Compatible with LX brand heaters.
Attaches directly to the heater.
Compatible with SP1200 DAVEY Controllers.
3 Models (3.5kW, 4.5 kW, and 6.0kW)
Gecko Reference 9920-400643
The 9920-400643 sensor is now replaced by the 9920-400446 sensor
Manufacturer reference: 26-0601-AT-K Power: 3.6kW Titanium heater 240V - 15A - 50/60Hz For spas using an M-Class control system 2-inch (60mm) fittings included
Only compatible with older PEIPS control systems.
Claudia B.
Elle est au top, plus de fuite 👍
Pierre F.
pièce d'origine
Pierre F.
pièce d'origine
Ludovic B.
Produit conforme à l’original
Olivier M.
Réchauffeur identique à celui d'origine. Très satisfait.
Gabriel Tiberiu L.
Perf
Olivier P.
Produit conforme , mais je dois faire une petite modification au niveau des tuyaux .
Agnieszka B.
Bardzo dobry
José J.
Produit arrive complet sur site on pensais qu il n y en avais qu une partie heureuse surprise
PATRICE E.
Conforme à la pièce d’origine