Welcome to our category of spare parts for inflatable spas. Here you will find all the parts necessary to maintain and repair your inflatable spa, regardless of its brand and size. We offer a wide selection of spare parts for inflatable spas, such as pumps, control panels, heaters, electronic boards, blowers, transformers, and other parts.

Manufacturer & Expert

7,000+ References

Fast Shipping

Technical assistance

All Major Brands
Inflatable spas parts
Welcome to our category of spare parts for inflatable spas. Here you will find all the parts necessary to maintain and repair your inflatable spa, regardless of its brand and size. We offer a wide selection of spare parts for inflatable spas, such as pumps, control panels, heaters, electronic boards, blowers, transformers, and other parts.
122 products
Filter diameter: 107 mm
Filter height: 68.5mm
Top: open, inner diameter 32mm
Bottom: open, inner diameter 55mm
Compatible with all MSPA inflatable spas
MSPA reference: B9300637
Set of 6 filters for MSPA inflatable spas
Filter diameter: 107 mm
Filter height: 68.5mm
Top: open, inner diameter 32mm
Bottom: open, inner diameter 55mm
Plug Differential circuit breaker 10mA 220V for inflatable spas
Compatible with inflatable spas from brands like MSPA, Aquaspa, Ospazia, Bespa, and many others.
Ensures the safety of the spa during an electrical fluctuation.
Compatible with all generations of Bubble spas
MSPA Reference: B9300171
Compatible with all generations of MSPA spas
Not compatible with the Tuscany model
for Aquaspa, Ospazia, Becool II, Alton family, Hespéride, Lumix, Infinite Spa hot tubs
To be attached at the bottom of your inflatable spa.
You will receive one of the 2 versions depending on stock availability (see photos) - Same dimensions.
Ospazia, Aquaspa, Sunbay, Bcool II, Lumix, Infinite Spa...
To be installed inside the motor block.
For spas from 2010
Antimicrobial filtration
Diameter: 11 cm
Height (including notches): 12.1 cm
Height (excluding notches): 10.6 cm
Top: Closed
Bottom: Open, diameter 7.5 cm
Double resistance - Increased reliability
To be installed inside the motor block
Power: 1800W
NOT compatible with spas equipped with old single resistance heaters
Circulation pump for Ospazia, Aquaspa, Bcool II, Lumix, Infinite Spa..
To be installed inside the motor block.
For spas from 2010
Compatible with the electronic control systems integrated into your Tuscany / FRAME spa.
Manufacturer reference: B9301597 / B9301752
Complete keypad including mounting bracket, protective cover, and Electronic board
Compatible with all generations of Bubble spas.
Features 2 small tabs on the sides to clip onto your Bubble filter
Compatible with all generations of MSPA spas
Allows you to connect your drainage nozzle to a garden hose.
Manufacturer reference: M1801-PB
Compatible MSPA motor block: Delight, Comfort Lite (generation from 2020)
Compatible with MSPA Europe spas only
Compatible with MSPA spas of the PREMIUM / ELITE / LITE 2015 generation.
MSPA Reference: B9301195
MSPA Reference: B9301394
This plug allows you to measure the air pressure in your spa
Compatible with all MSPA Delight spas
Seal included
Electronic board located behind the keyboard included
Keyboard dimensions: 128 mm x 84 mm
Color: red
Compatible with brands: Alton Family, Aquaspa, Bcool 2, Bcool III, Garden Allstore, Hesperide, Sunbay.
Positioned between the pump and the heater
Compatible only with MSPA Lite spas
MSPA Reference: B9301053
Protects your filter during bathing.
Extends the life of your filters.
Compatible with Aquaspa, Ospazia, Hesperide, Alton Family, Mspa filters, etc.
Compatible with MSPA Bubble premium generation spas
Compatible with New 2 + / LITE / Premium spa generations
MSPA reference: B9300983
Compatible with Ospazia, Aquaspa, Bcool II, Alton Family, Hesperide, Sunbay spas.
Flow sensor for inflatable spa
Compatible with many brands of inflatable spas
Seal not supplied, the product remains compatible.
To be installed inside the motor block.
Input: 240V - 50Hz - 0.3A
Manufacturer reference: B9301544 / B9301426
Dimensions: 170 x 95 mm
Equipped with a UVC touch
Height: 83 mm
Diameter: 104 mm
Inner thread diameter #1: 60 mm
Inner thread diameter #2: 31mm
LITE 2020 / Delight Keypad for Mspa inflatable spas
Compatible with MSPA Bubble spas of LITE 2020 and DELIGHT generation
Old MSPA reference: B9301192
New MSPA reference: B9301278
Sold without cable
Compatible with Ospazia, Aquaspa, Bcool II, Sunbay, Hespéride, Lumix, Infinite Spa, and more..
Compatible with MSPA Gen2, Gen2+, and New2+ motor blocks
Includes pump, heater, and union gasket
Compatible with many inflatable spa brands
Diameter: 59 mm
Compatible with all generations of MSPA spas.
Height: 83 mm
Diameter: 104 mm
Inner thread diameter #1: 60 mmInner thread diameter #2: 31mm
Compatible with all MSPA generations
Compatible with Aquaspa, Ospazia, Becool II, Alton family, Hespéride, Lumix, Infinite Spa..
Compatible with 2015 LITE generation MSPA Bubble spas.
Repair Kit for MSPA Inflatable Spas
Available in 2 colors: Black or Transparent
Sold in a pack of 2 fittings of 15cm X 10cm each
Glue included
Attention: this board is the spa's motherboard and is located in the motor block. It is not the one located under the control panel.
Transformer for MSPA Elite & Premium spa
Compatible with Elite & Premium spas
MSPA reference: B9300933
Compatible with all MSPA models.
MSPA reference: B0301560
Compatible with MSPA Bubble spas of Gen 2 / Gen 2+ / New 2+ generation
AC 230V - 50 Hz - 900 W
Reference MSPA: B9300679
Compatible with MSPA Bubble Lite and Lite 2015 generation spas / Not compatible with Lite 2020 generations
Positioned between the pump and the heater
Allows detecting the presence of flow in the heater circuit
MSPA reference: B9301234
Compatible with MSPA Delight generation spas
Blower (air blower) for Aquaspa, Ospazia, Bcool-II, Alton Family, Heperide, Sunbay, Lumix, Infinite Spa...
To be installed inside the motor block.
We have a large stock of spare parts for inflatable spas, including parts for popular brands such as Intex, Mspa, and many others. All our products are available at competitive prices, and we are committed to providing excellent customer service to address all your questions and needs.
We take pride in offering high-quality products at affordable prices for all types of inflatable spas. We are dedicated to providing superior quality spare parts for inflatable spas and quality customer service. Order now and enjoy an unforgettable spa experience in peace with our reliable products and services.
Mario S.
Eine Alptraum. Ich habe eine völlig andere Kopfstütze erhalten. Die, die ich brauche, ist auf der Homepage abgebildet, aber nicht mehr im Bestand! Anstatt das dann auch so zu kommunizieren wird willkürlich ins Regal gegriffen und eine andere Ecke zugesendet. Der Kunde hat dann die Arbeit !!! Für mich ist es unfassbar, das es für mein Modell, das ich 2026 neu gekauft habe, keine Ecke mehr geben soll. Begründung BOOSPA: "Leider teilt mir der technische Service mit, dass die von Ihnen gewünschte Referenz nicht mehr verfügbar sein wird, da der Hersteller die Produktion der Ecken für Modelle vor 2026 eingestellt hat." Entschuldigung, aber das ist lächerlich. Dann sollte der Hersteller auch keine Produkte vertreiben, die vor 2026 hergestellt wurden. Dann hätte der Kunde auch keine Probleme mit Ersatzteilen! Niemand der im Versandhandel kauft, weis oder wird darauf hingewiesen, in welchem Jahr das entsprechende Produkt ( bei mir der Pool MSPA Oslo ) hergestellt wurde. Erst recht nicht, wenn die Ersatzteile laut Homepage verfügbar sind! Eine Katastrophe!
Mario S.
Perfekt.
Christian R.
Tous les articles étaient disponibles et correspondants à ma commande livraison rapide merci
Christian R.
Livraison rapide correspond à mon attente site fiable merci
Piotr B.
Grzałka jest kompatybilna z moim mspa tuscany
Peter G.
Very good deal.
David B.
Conforme à mes attentes
David B.
Conforme à mes attentes
Fabrice B.
merci pour toute ma commande je recommande merci
Jeannot E.
Xxxx
