
Pneumatic Control Kit
Includes all the parts necessary to set up a pneumatic control to start/stop a device.
Simply and easily build your massage spa with our ready-to-install Boospa concrete spa kits.
This kit is commonly used in setting up circuits for concrete spas but can also be used in traditional spas.
Composition of the pneumatic kit:
Some guidelines to follow:
- It is imperative that the length of the pneumatic hose does not exceed 5 meters. Otherwise, the air pressure will not be sufficient in the pneumatic hose to activate the switch.
- The NCC box is connected to a permanent power supply. Generally, it is directly connected to the spa's electrical box.
- The phases are connected to the switch, the neutrals and ground wires are connected using the automatic terminals provided with the kit
- Pneumatic Button
- The pneumatic button has a chrome steel coating
- Recessed hole size 33mm
- Quantity: 1
- Product Sheet
- Pneumatic Hose
- Used to connect the pneumatic button to the NCC box
- The length should not exceed 5 meters
- Quantity: 5 meters
- Product Sheet
- NCC Box
- The box integrates a pneumatic switch that will open/close the electrical circuit with each action of the pneumatic button
- Dimensions: 66mm x 140mm x 81mm
- IP56 Protection
- Quantity: 1
- Product Sheet
This is a basic kit, and it is possible to adapt the parts on request so that the kit can meet specific needs.