MSPA
157 products
Set of 2 filters for MSPA inflatable spas
Filter diameter: 107 mm
Filter height: 68.5mm
Top: open, inner diameter 32mm
Bottom: open, inner diameter 55mm
Compatible with all MSPA inflatable spas
MSPA reference: B9300637
Inflation valve + cap for Mspa spas
Reference MSPA: B0800016
Compatible with all generations of MSPA spas
Not compatible with the Tuscany model
Set of 6 filters for MSPA inflatable spas
Filter diameter: 107 mm
Filter height: 68.5mm
Top: open, inner diameter 32mm
Bottom: open, inner diameter 55mm
Compatible with all generations of Bubble spas
MSPA Reference: B9300171
Compatible with all generations of MSPA spas
Not compatible with the Tuscany model
MSPA Reference: B9301402
Adapter that allows the use of MSPA filters. Compatible spa models are those with two connections to their motor block (one for water return and one for suction (where you place your filter).
Transformer for MSPA LITE spa
Compatible with the LITE spa generation
but also with the majority of inflatable spa filters of similar dimensions
MSPA Reference: B9301472
Prevents E1 code risks
Filter not included
MSPA Reference: B9301467
Prevents E1 error risks
This kit includes: 1 MSPA filter, 1 protective sock, and 1 return/suction nozzle
Backflow Nozzle for MSPA Spa Bubble
Compatible with all generation of MSPA Bubble spa
Compatible with all generations of MSPA spas
Allows you to connect your drainage nozzle to a garden hose.
Compatible with MSPA spas of the PREMIUM / ELITE / LITE 2015 generation.
MSPA Reference: B9301195
Manufacturer reference: M1801-PB
Compatible MSPA motor block: Delight, Comfort Lite (generation from 2020)
Compatible with MSPA Europe spas only
Manufacturer reference: B9301597
Attention, the circuit board is sold separately
MSPA Reference: B9301394
This plug allows you to measure the air pressure in your spa
Compatible with all MSPA Delight spas
Seal included
Positioned between the pump and the heater
Compatible only with MSPA Lite spas
MSPA Reference: B9301053
Compatible with MSPA Bubble premium generation spas
Compatible with New 2 + / LITE / Premium spa generations
MSPA reference: B9300983
Clip-on Cover for Square Inflatable MSPA Spa
Thermally insulating protection attachable with clips.
Protects and retains heat in your spa.
6-seater model for square spas
Manufacturer reference: B9301544 / B9301426
Dimensions: 170 x 95 mm
Equipped with a UVC touch
Compatible with MSPA Gen2, Gen2+, and New2+ motor blocks
Includes pump, heater, and union gasket
White PVC inflatable spa cover for MSPA inflatable spas.
For 4-person or 6-person spas.
Mspa Reference: B9301478
Compatible with: Mspa MONO 2020 and TUSCANY 2020 inflatable spa housings
Dimensions: Length: 27cm - Width: 15cm - Height: 9.5cm
LITE 2020 / Delight Keypad for Mspa inflatable spas
Compatible with MSPA Bubble spas of LITE 2020 and DELIGHT generation
Old MSPA reference: B9301192
New MSPA reference: B9301278
Sold without cable
Compatible with all generations of MSPA spas.
Compatible with all MSPA generations
Compatible with 2015 LITE generation MSPA Bubble spas.
MSPA Reference: B0301976 - B0302010
White PVC cover for inflatable spas.
2 models: 4-seater (120cm x 120cm) and 6-seater (150cm x 150cm).
MSPA Reference: B9301403
Reference MSPA: B9300679
Compatible with MSPA Bubble Lite and Lite 2015 generation spas / Not compatible with Lite 2020 generations
MSPA reference: B0301560
Compatible with MSPA Bubble spas of Gen 2 / Gen 2+ / New 2+ generation
AC 230V - 50 Hz - 900 W
White PVC inflatable spa cover by MSPA for inflatable spas.
For 4-seater or 6-seater spas.
Compatible with all MSPA models.
Compatible with Elite & Premium spas
MSPA reference: B9300933
Repair Kit for MSPA Inflatable Spas
Available in 2 colors: Black or Transparent
Sold in a pack of 2 fittings of 15cm X 10cm each
Glue included
Heating Block + Pump Replacement Kit for LITE, BERGEN, TEKAPO, OTTOMAN, and STARRY models manufactured in 2020 and 2021
Includes pump, complete heating block, flow sensors + probes
B9301405 - B9301406 (B9301453)
Manufacturer reference: B9301613
Compatible with MSPA LITE 2020/2021/2022 spas with or without UVC
includes UV option
Water filling
Repair Kit for MSPA Inflatable Spas
Available in 2 colors: Black or Transparent
Sold in a set of 2 connectors measuring 15cm X 10cm each
Glue included
Allows detecting the presence of flow in the heater circuit
MSPA reference: B9301234
Compatible with MSPA Delight generation spas
Compatible with Premium generation MSPA Bubble spas
Compatible with 2020 Lite generation MSPA spas
MSPA Reference: B9301406
Gasket not included
Positioned between the pump and the heater
MSPA Reference: B0800017
Compatible with Gen 2 Gen 2+ and New2+ spa generations
Frédéric C.
Parfait
Frédéric C.
Parfait
Frédéric C.
Parfait
Frédéric C.
Parfait
Frédéric C.
Parfait
Maimouna C.
Parfait
Maimouna C.
Parfait
Eric L.
Très bien
James A.
Rapide efficace
Ludovic D.
Conforme