Filter Kit, Sock, and Suction/Discharge Nozzle for MSPA
The kit is compatible with MSPA inflatable spas with only one outlet at the inner wall of the pool.
Prevents E1 code risks - Its role is to limit the infiltration and accumulation of deposits (hair, dead leaves, etc.) in the filter and pump of your spa.
Reference MSPA: B9301467
This kit includes:
1 Original MSPA® Filter + its protective sock: The
protective sock around the
inflatable spa filter increases its lifespan. Remember to remove it after each bath and clean your filter at least two to three times a week.
Filter dimensions:- Filter diameter: 107mm
- Height (including nozzle): 93.50mm
- Height (without nozzle): 68.5mm
- Top: Open
- Bottom: Open, diameter 55mm
Tip: Replace your filter every 2 weeks
1 latest generation suction/discharge nozzle: The specificity of this new nozzle is that it
no longer has openings at the base of its thread (see next photo). This significantly reduces access and the accumulation of deposits in the filter and pump, thus increasing their longevity.
Dimensions:- Outer diameter of thread: 57.50mm
- Nozzle length: 91mm
Old MSPA suction/discharge nozzle (not included in the kit)
If your remote displays "Error E1," here's how to solve this problem by installing this kit.
Installation guide:- Unplug the power cord to turn off the spa
- Completely drain the spa
- Remove your old filter cartridge
- Unscrew the suction nozzle counterclockwise and remove it
- Install the new suction nozzle. Turn clockwise until fully screwed in
- Install the new filter cartridge with its protective sock
IMPORTANT To maintain optimal filtration and increase the reliability of your Lite By MSPA spa, it is essential to keep the water and filter constantly clean.
- Always keep the filter in the pool when the filtration is running.
- Never remove the filter when the filtration is running.
- Never remove the filter when bathers are in the pool.
This item is available in a pack of 6 at a discounted price.
