BALBOA INSTRUMENTS
457 products
Can replace the following references:
6472-857 (Old reference)
6472-841 (New reference)
Balboa reference: 54906
New model (Compatible with old generation)
Compatible with Balboa Wave3one ozonator
Power 7W (original model: 4W)
Length 25cm
Compatible with Balboa heaters
Male AMP plug / connector + 4 crimp contacts
To connect your spa equipment directly to your electronic board.
Widely used in the spa industry, especially on Balboa Instruments control boxes.
Length 25cm
Compatible with Balboa heaters
Compatible with: all BP series control systems
Balboa Reference: 57562
BALBOA Reference: 54806
Temperature sensor for Balboa M7 system heaters and controls
Length: 57 mm
Front diameter: 91 mm
Fixing zone diameter: 54 mm
Manufacturer reference: 10-4820WHT
Jet for BALBOA hydro-massage nozzle
Balboa Reference: 59304
Control your spa from your smartphone or tablet (Android or iOS)
Compatible with Balboa BP series control units
Compatible with smart voice commands Alexa and Google
Can control: 1 circ. pump, 1 single or dual-speed pump, 2 single pumps, 1 blower, 1 ozonator, 1 light, 1 audio system.
Male AMP plug / connector + 2 crimp contacts
Used to connect your spa equipment directly to your electronic board.
Commonly used in the spa industry, especially on Balboa Instruments control boxes.
BP6013G3 Electronic control box + heater
Balboa reference: 56833
3 massage pumps + 1 blower
Available WIFI module that allows remote control.
Balboa Hydro-air Reference 1030025
High performance and quiet operation
Power: 0.25 HP – 200 watts
Supplied without fittings
Includes connection cable + AMP connector
Made in Denmark.
BALBOA Reference: 1031025
High performance and quiet operation
Power: 0.25 HP – 200 watts – 230 V 50 Hz
Supplied without fittings
Includes connection cable + AMP connector
Manufacturer reference: 26397
Amperage: 1/8 A
Sold individually
Front diameter: 69mm
BALBOA Reference: 50-3420WHT
Compatible with Wall Fitting 10-4320
Reduction: Male 1/2" (21mm) to Female 20mm
Allows the conversion from imperial (inch) to metric (mm) system.
Complete Spa Light 8.3 cm Diameter
Plug Cable Amp + 12V bulb included
Connection: AC12V - 2 wires
Front Diameter: 83mm
Compatible with pumps:
Hi-flow, Varimax, Durajet, 103100-NHP, 1023110-NHP, Niagara, and HA440NG
Second generation of the 100% touch SpaTouch color keypad
Compatible with BP series BALBOA systems
The Titanium version of the 58118 heater
Compatible with GS/GL2000 series
Reference BALBOA: 25662-1
Length: 7.5 meters
Hydroair Reference: 1023024
Power: 1.5 HP (1.3 kW) – 220-240V 50Hz
Supplied with piping fittings + connection cable with AMP connector
This model replaces the ITT Hydroair Magnaflow 440 pump, as its production has been discontinued
Third-generation SpaTouch color touchscreen keypad
Compatible with BALBOA BP series systems
5-inch screen
For Duplex systems.
Compatible with Balboa GSxxx or GSxxxZ series control boxes.
Balboa Reference: 55080 (white borders).
Compatible with certain Balboa BP and GS control systems
Replaces reference: 55138
Water inlet in 1.5" F (48mm interior)
Air inlet in 1/2" F (21mm interior)
Nozzle outlet in 1.5" M (48mm exterior) or in 40mm F
Compatible with Balboa control boxes from the GSxxxSZ series.
Balboa reference: 53189 (Blower/Jets1/Jets2/Light/Mode/Warm/Cool).
4-button model
Allows you to mount the M7 sensor on your heater while maintaining its waterproof seal.
Titanium resistance
Power: 2.9kW
Reference Caldera/Hotspring®: 1076701
Compatible with Balboa BP series control systems (version 7.0 or higher).
Balboa Reference: 57280 (Jets1, Jets2, Jets3, Light, Aux).
NOT compatible with CLIM8ZONE.
Allows control of up to 3 pumps
Front diameter (ABS): 92mm
Socket connection diameter: 54mm
Ideal for concrete spa
Length 25cm
Compatible with heaters: Balboa
Printed Circuit Board for Balboa BP6013G3 Control Box
Balboa Reference: 56833-03
Dimensions: 280 x 170 x 48.50 mm
Heating Element Type: Incoloy 800
Fittings not included
Power: 3kW - 4.02 HP
Pipe Diameter: 2" (fittings included)
Flow Rate: 75L / min
Embedded hole diameter: 37-45mm
Front diameter: 48mm
External water inlet diameter: 3/4” (19mm)
External air inlet diameter: 3/8” (9.5mm)
Rings (for tightening and compensation) + gasket included
Compatible with Balboa GS501Z control systems
Balboa electronic board reference: 54512-01
Compatible with heaters 58118 and 58107
Michel G.
la résistance se remplace très facilement.
Albert F.
matériel parfaitement protégé
Pascal R.
Bonne qualité et bien emballé.
Claude L.
Parfait
Michel D.
Facile à remplacer sans être spécialiste.
Christophe D.
Conforme
Amalia S.
Tres bien
Chrystelle R.
Très bien
Isabelle V.
Facile à installer, tres clair
David T.
Je mets juste 2 étoiles car côté clavier pas de souci il est propre et fonctionne à merveille mais je ne peux pas en dire sur l autocollant qui se craque déjà au niveau des boutons. Est ce qu’il est un peu vieux et qu’il a séché mais après quelques utilisations il y a déjà quelques fissures qui apparaissent. Je pense qu’il ne durera pas très longtemps.