BALBOA 3.0 kW 240V Heater with M7 Sensors
The M7 control system (Millennium 7) is a technology patented by Balboa. Sensors placed inside the heater allow accurate measurement of flow rate and water temperature continuously. Systems using this technology have a longer lifespan and are more reliable.
2 generations of Balboa 3 kW M7 heaters available for selection
- The Balboa model 58118 is equipped with 2 of these M7 sensors 30344 with a cable about thirty centimeters long. This 3 kW heater is one of the most commonly used in the market and is found in many control boxes. It features an Incoloy 800 resistance and can replace the heaters 58107 and even the 55626 which has a titanium resistance.
- The model 58279/58107 is equipped with a Plug N'Click system that makes it compatible with certain Balboa BP control box models. This system allows connecting this heater to compatible control boxes using a plug, avoiding the need for copper plates. This heater is identical to the 58118 heater except for the Plug N'Click system.
Summary of Balboa spa heater specifications
Specifications:- Power: 3 kW
- Voltage: 240 V
- Frequency: 50 Hz
- Amperage: 12.5 A
- Ohm: 19.2 Ω
- Sensor type: 2 M7 sensors
- Resistance type: Incoloy 800
| Dimensions:- Length with fittings: 495 mm
- Length without fittings: 380 mm
- Included fitting type: 2 inches
|
Plug N'Click System Diagram and Presentation
 | 
|
| Standard heater position | 2nd generation: Connection By Click |
Heater Piping Connection
The heater connects directly to a 2" (60mm outer diameter) piping
2" fittings are provided with the heater.
You can also reuse your old piping fittings if they are still functional. If your piping differs, check our range of Heater Fittings and Unions to find the fitting that matches your piping.
Control Boxes Compatible with this Spa Heater
Compatibility of the 2nd generation Plug N'Click version
This heater (reference: 58279) is compatible with the following Balboa control boxes (non-exhaustive list):
- BP600
- BP6013G1
- BP2100
- Can be installed on Balboa GS or GL series control boxes with the Plug N'Click male and female adapter.
