3kW Vulcan Nano Heater with Integrated Thermostat Standalone, operates without electronic board
Replaces Elecro Evolution Plug'n play 3kW spa heater
Elecro Reference: ELE-150-0090 Simply connect it to the power supply running parallel to your filtration pump power supply. The heater will automatically turn on based on the measured temperature/set temperature.
Mainly for built-in spas or above-ground pools
Advantages- Simple and quick "Plug and play" connection
- 3kW power
- Analog control thermostat (1°C increments)
- Standard hoses (32mm)
- Adapters 32mm, 38mm, 48mm, and 50mm included
- Electrical cable also included
| Power Supply | 230V single-phase |
| Flow Rate | Minimum 1 m3/h and maximum 17m3/h |
| Control Thermostat | From 0 to 40°C (1°C increments) |
| Safety Circuit Breaker | 55°C (manual reset) |
| Flow Detector | Contact blade covered with a thin layer of gold with titanium support shaft |
| Wiring | High-temperature silicone sheath, multi-strand copper conductors |
| Seals | Special high-temperature Polymer formula |
| Water Connections | 1.5" BSP female connection, supplied with 1.5" 50mm adapters for ABS hose connection |
| Operating Pressure | Maximum 4 bars |
| Installation | Ground or wall mounting |
Dimensions 
Compatible with
Suitable for all spas not using a control system