Looking for other spa pump parts? At Boospa, we offer a wide range of high-quality spa pump parts to meet all your needs. With our large available stock, we have the most common references for massage and circulation pumps ready to be shipped quickly. If you need a specific part, we can also provide you with all other parts upon request, along with a personalized quote. Take advantage of our fast delivery to get your spa up and running in no time!
Other parts
Looking for other spa pump parts? At Boospa, we offer a wide range of high-quality spa pump parts to meet all your needs. With our large available stock, we have the most common references for massage and circulation pumps ready to be shipped quickly. If you need a specific part, we can also provide you with all other parts upon request, along with a personalized quote. Take advantage of our fast delivery to get your spa up and running in no time!
81 products
Allows the rotor to be powered by electric current.
Defective carbons are among the most common failures of blowers.
Reference Wateway 672-4350
High-quality ABS
Allows to control the start/stop of the pneumatic device.
Diameter: 46mm
Compatible with DXD and LX pumps released before 2018
Thread diameter: 11.5mm
Plug + Gasket
Allows to control the start/stop of the pneumatic device.
Diameter: 42mm
Motor feet designed to reduce vibrations.
Corresponds to parts 56 and 57 on the exploded view.
To be used with pneumatic blowers and pumps from the Balboa Hydroair range
Allows for controlling the start, speed, and stop of the air blower
Aquaflo Reference: 92200301
Allows to control the start/stop of the pneumatic device.
Diameter: 44mm
1/4'' Drain Plug for Gecko pump series Flo-Master XP2, Flo-Master XP2e, and Flo-Master XP3
To be used with pneumatic blowers and pumps from the Balboa Hydroair range
Allows for controlling the start, speed, and stop of the air blower
Reference WATERWAY: 511-1000
Inner Diameter: 158 mm
Outer Diameter: 141 mm
Gasket sold separately
Only suitable for Laing E14 circulation pumps.
Allows to control the start/stop of the pneumatic device.
Diameter: 41mm
Outer diameter: 17mm
Inner diameter: 11-12 mm
Thickness: 2.4mm
Bearing for DH1.0 circulation pump and WTC50 LX Whirlpool
Bearing reference: 6202rs
Bearing for WP/LP200 LX Whirlpool massage pump
Reference: 6204 and 6203
Bearing for WP/LP200 LX Whirlpool massage pump
Reference: 6204 and 6203
Compatible with Lx Whirlpool JA50 pumps
Corresponds to part number 11 in the exploded view
LX Reference: A29070002
Compatible with LX pumps released after 2018
Thread diameter: 13mm
Gasket not included
Easily screws behind its pump body
Power: 39 W - 100-240 V - 50/60Hz
Length: 90 mm
Thread diameter of the clamping ring: 69 mm
Sold without its pump body
Significantly reduces the noise of your spa pump.
Compatible with most pumps.
To be placed on the outlet of your ASD AR-700 blower
Inner diameter: 34mm
Outer diameter: 39mm
This box allows you to start or stop a device using pneumatic action.
Collects debris to prevent pump damage
Handle included
Allows to control the start/stop of the pneumatic device.
Diameter: 44mm
Seal for Gecko Drain Plug for Gecko pump series Flo-Master XP2, Flo-Master XP2e, and Flo-Master XP3
Only suitable for E10 circulation pumps with plastic bases. Not compatible with red E10 pumps.
Bearing for JA50/TDA50 LX Whirlpool circulation pump
Corresponds to part number 13 in the exploded view
Greatly reduces the noise from your spa pump.
Compatible with most pumps.
Manufacturer's reference: 672-1780
suitable for CF25, CF50, and CF75 models
Diameter: 210 mm
Seal for Gecko drain plug for Aqua-Flo Gecko Circ-Master and Flo-Master Series pump lines.
2HP and 3HP: 319-1380 / 4HP and 5HP: 319-1370
Plug + Gasket
The plug allows you to bleed the various pumps of your spa.
Ensures the sealing of the front and back flanges of your PB series pump from Sirem
Compatible with Waterway pumps
Reference: 313-1400
Aquaflo Reference: 92200090
Compatible with CMCP and CMHP versions
Replaces the motor of Ultra 9000 blowers from generations .... .
Allows for replacing only the defective motor instead of the entire blower.
2HP and 3HP: 319-1380 / 4HP and 5HP: 319-1370
Power: 3 HP (0.52–2.48 kW) – 56-frame motor
Connection cable not included
Compatible with Waterway and Aqua-Flo pumps
Only suitable for E10 pumps
Bearing not included
- 1
- 2
Didier T.
Livraison rapide!👍
Christophe M.
Parfait
Goffray V.
Conforme à la description. Etanche en immersion. Parfait pour ma nage à contre courant.
Philippe G.
Rapide et conforme.
Karl D.
Bon rapport qualité / prix
Karl D.
Bon rapport qualité / prix
Thierry B.
Des silent-blocs... juste des silent-blocs :)
Philippe A.
Excellent
Philippe B.
Parfait
Philippe B.
Parfait


