GECKO
141 products
- Best Seller
Bromicharge by GECKO
The Bromicharge® is the consumable product for the IN.Clear system.
It consists of sodium bromide enabling the production of bromine through electrolysis.
This control box can manage: 1 circulation pump, 2 massage pumps, 1 ozonator or blower, 1 light.
Compatible with Gecko 2 kW SSPA heater
Compatible with Gecko 3 kW Universal heater
Replaces the discontinued Gecko Dtec 1.8 PSI pressure switch
Compatible with Gecko control boxes: in.xm2, in.xe, in.yt, and in.ye
Manufacturer reference: 0607-008087
- New
Gecko Reference: 0800-500003
Contains:
- Impeller
- Wear ring
- New
Gecko Reference: 0800-500002
Outer Diameter: 111 mm
Contains:
- Impeller
- Wear ring
- New
Gecko Reference: 52272000
Gaskets included
Capacitive touchscreen color display
Gecko Reference: 0607-005008
1/4'' Drain Plug for Gecko pump series Flo-Master XP2, Flo-Master XP2e, and Flo-Master XP3
Integrated 3kW Heater
Input: 230-240VAC 50Hz - 48A max.
Can control up to 3 pumps and/or blowers
2-inch connection
Manufacturer Reference: 0810-690000
Power: 230 W (~0.25 HP)
Maximum flow rate: 320 liters per minute
Cable + AMP plug included
Compatible with GECKO control boxes series IN.XE, IN.XM, IN.XM2, and Y.
Gecko reference: 0607 - 008064
Gecko Reference 9920-400446
Compatible with Gecko Y and X series control boxes.
Part of the heat.wave range and therefore compatible with the in.yj control system only.
Compatible with Gecko Y and X series control boxes.
GECKO Reference: 0607-008030
Allows you to connect a dual-speed pump in your spa to your IN.XM or IN.XE system.
Heater for Gecko IN.YJ-V3 system
Manufacturer part number: 0613-421011
Resistance type: Incoloy 800
Power: 3000 W
Heating length: 380 mm
Total length (with union): 490 mm
Internal diameter: 60 mm
This is Gecko's compact control box. It allows for the control of a dual-speed pump, a massage pump, an ozonator, an auxiliary outlet, and 12V lighting. Available in 2 versions: IN.YJ-2 and IN.YJ-30.
- Second chance
Product Feature: Controls 1 massage pump
Specifications: Union fittings and cables not included, Integrated 3 kW heater. Works perfectly
GECKO IN.THERM Heater 2kW / 3.8kW / 4kW
Compatible with GECKO control boxes series IN.XE and IN.XM
4kW model replaced by the 3.8kW model
Allows you to connect a component of your spa to the electronic board
Compatible with units equipped with a "Mini JJ" plug
Seal for Gecko Drain Plug for Gecko pump series Flo-Master XP2, Flo-Master XP2e, and Flo-Master XP3
Gecko Reference: 0605-500010
IN.CLEAR Bromine Generator
Allows for a constant production of Bromine in your spa water.
Significantly reduces the products needed for its maintenance.
Electrical connection: 220-240V
Control panel not included
Red 3-pin plug for Y-Class and M-Class systems
Gecko Reference: 9920-400489
Seal for Gecko drain plug for Aqua-Flo Gecko Circ-Master and Flo-Master Series pump lines.
Equipped with a 3kW heater
Equipped with a Gecko IN.k8 - CS6P52Y-US-8 keypad
For 12V LED lighting - 2 Wires
Red plug with 3 pins and female AMP plug with 2 pins
Length: approximately 2.50 meters
Compatible with GECKO M-Class control boxes.
Compatible with Gecko Y and X series control boxes.
Dimensions: 168mm x 70mm
3M adhesive surface
IN.XE Electronic Box + K.200 Keypad + Cables Kit
Sturdy, compact, ingenious, and innovative, it is mainly designed for entry-level spas.
Frédéric G.
Produit compatible avec les spa Be Well. Fonctionne parfaitement.
Michel A.
Parfait
Eric M.
Rien a ajouter
Pietrantonio V.
Très bon produit, le prix était raisonnable
Josyane V.
bon produit
Dominique G.
Bon produit
Jacques L.
Conforme à l'attente
Alain C.
super facile a remplacer
Gil G.
Article conforme à notre attente .
Yann H.
très réactif et expédition rapide