GECKO IN.THERM Heater 2kW / 3.8kW / 4kW
Compatible with GECKO control boxes IN.XE and IN.XM series.
4kW model replaced by the 3.8kW model
It includes a built-in temperature sensor and a new water flow detection function that eliminates the need for a pressure switch. The In.therm heater controls multiple power levels with a single element, extending its life by heating at high power only when required. No adjustments are necessary, providing you with unmatched reliability.
IN.THERM Heater Models References:
- 2kW Model GECKO Reference: 0603-421003 (Old reference: 0603-421002)
- 3.8kW Model GECKO Reference: 0603-421005
- 4kW Model GECKO Reference: 0603-421001 (Replaced by the 3.8kW model)
3 models: 2kW / 3.8kW / 4kW (not available)
Product Dimensions:
Width 275 mm
Depth 185 mm
Height 52 mm
Minimum flow rate of circulation pump 66 liters per minute | Common issues with heaters:
- Overvoltage on the resistor
- Resistor overheating
- Resistor causing a short circuit
|
<réchauffeur 2kw="" gecko="" in.therm-h2.0-ce="">
Download the product sheet for Gecko In.therm Heater H.4 - 4kW
Pipe Connection
The heater connects directly to a 2" pipe (60mm outer diameter) or a 1.5" pipe (48mm)
Delivered without fittings.
<réchauffeur 2kw="" gecko="" in.therm-h2.0-ce="">2'' Pipe Fittings (for 2'' pipe, 60 mm outer diameter)
Fittings also available in 1.5'' (for 1.5'' pipe, 48 mm)
You can also reuse your old pipe fittings if they are still functional. If your piping differs, check our Fittings and Unions range to find the fitting that matches your piping
Compatible with
Gecko control boxes <réchauffeur 2kw="" gecko="" in.therm-h2.0-ce="">IN.XM / XM2 and IN.XE
