Discover our selection of various spare parts for inflatable spas. Find the replacement parts you need among the most popular brands (MSPA, Ospazia, Aqua, and many more). These are the parts you need to keep your inflatable spa in good working condition!
Other Parts for Inflatable Spa
Discover our selection of various spare parts for inflatable spas. Find the replacement parts you need among the most popular brands (MSPA, Ospazia, Aqua, and many more). These are the parts you need to keep your inflatable spa in good working condition!
82 products
Compatible with all MSPA inflatable spas
MSPA reference: B9300637
Compatible with all generations of Bubble spas
MSPA Reference: B9300171
Compatible with all generations of MSPA spas
Not compatible with the Tuscany model
for Aquaspa, Ospazia, Becool II, Alton family, Hespéride, Lumix, Infinite Spa hot tubs
To be attached at the bottom of your inflatable spa.
You will receive one of the 2 versions depending on stock availability (see photos) - Same dimensions.
Backflow Nozzle for MSPA Spa Bubble
Compatible with all generation of MSPA Bubble spa
Compatible with all generations of MSPA spas
Allows you to connect your drainage nozzle to a garden hose.
MSPA Reference: B9301394
This plug allows you to measure the air pressure in your spa
Compatible with all MSPA Delight spas
Seal included
Positioned between the pump and the heater
Compatible only with MSPA Lite spas
MSPA Reference: B9301053
Protects your filter during bathing.
Extends the life of your filters.
Compatible with Aquaspa, Ospazia, Hesperide, Alton Family, Mspa filters, etc.
Compatible with Ospazia, Aquaspa, Bcool II, Alton Family, Hesperide, Sunbay spas.
Compatible with New 2 + / LITE / Premium spa generations
MSPA reference: B9300983
Flow sensor for inflatable spa
Compatible with many brands of inflatable spas
Seal not supplied, the product remains compatible.
To be installed inside the motor block.
Input: 240V - 50Hz - 0.3A
Compatible with Ospazia, Aquaspa, Bcool II, Sunbay, Hespéride, Lumix, Infinite Spa, and more..
Compatible with many inflatable spa brands
Diameter: 59 mm
Compatible with all generations of MSPA spas.
Compatible with all MSPA generations
Compatible with Aquaspa, Ospazia, Becool II, Alton family, Hespéride, Lumix, Infinite Spa..
Compatible with all MSPA models.
Repair Kit for MSPA Inflatable Spas
Available in 2 colors: Black or Transparent
Sold in a pack of 2 fittings of 15cm X 10cm each
Glue included
Repair Kit for MSPA Inflatable Spas
Available in 2 colors: Black or Transparent
Sold in a set of 2 connectors measuring 15cm X 10cm each
Glue included
Allows detecting the presence of flow in the heater circuit
MSPA reference: B9301234
Compatible with MSPA Delight generation spas
MSPA Reference: B0800017
Compatible with Gen 2 Gen 2+ and New2+ spa generations
Positioned between the pump and the heater
It allows you to check that your spa is properly inflated.
MSPA Reference: D0101641
Outer diameter of the seal: 44.7mm
Compatible with motor blocks of Lite, Lite 2015, Jb301, and JB304 generations
MSPA Reference: B9301037
Compatible with Premium spa generation
Includes 1 injector, gasket, and tightening nut
Allows securing the installation when a high temperature is detected.
for Aquaspa, Ospazia, Becool II, Alton family, Hespéride, Lumix, Infinite Spa hot tubs..
To be installed at the outlet of your Blower.
Compatible with CONCEPT 2020 and FRAME 2021 / 2022 spas
Compatible with Alton Family, - Aquaspa - Bcool 2 - Bcool II - Garden Allstore - Hesperide - Ospazia - Sunbay - Water Health Infinite Spa, Lumix brands.
16A - 220-250V - 10mA - IP55
Compatible with brands such as Hesperide, Ospazia, Spark, Aquaspa, Sunbay, BecoolII, Waterhealth, BeSpa, Bubblespa, Lumix, Infinite Spa, and many more
for Aquaspa, Ospazia, Becool II, Alton family, Hespéride, Lumix, Infinite Spa spas.
This tool is designed to remove the nozzles from your inflatable spa.
Reference MSPA: B9301499
Cover for 4-person MSPA inflatable spa
Dimensions: 158 x 158 cm
Color: gray
8 straps and clips included
Tub NOT included
MSPA Reference: B9301395
Thread Diameter: 39mm
Thread Length: 25mm
Compatible with MSPA brand spas
Mirror effect ABS
MSPA reference: B9301311
Compatible with Jombo hand pumps
Nozzles + gasket included.
- Compatible with MSPA Lite LS06-GR.
- Sold separately, without tub or control unit.
- Provides insulation and protection for the spa.
- Original clips and mounting system.
Compatible with B-170 spas of Gen 2+ and New 2+ generations
Compatible with many brands of inflatable spas
Compatible with the Premium spa generation
These three tools will help you remove jet covers, jets, and return/suction nozzles
Compatible with Tuscany spas by MSPA brand
Used for inflating the pool.
ABS handle to clip on.
Compatible with square Spas measuring 145cm in length
Except for MSPA inflatable Spas
Length: 1.5 meters
- 1
- 2
Frédéric C.
Parfait
Frédéric C.
Parfait
Frédéric C.
Parfait
Maimouna C.
Parfait
Michel O.
Bouchon un peu cher
Maimouna C.
Parfait
Christophe C.
Photo non contractuelle (c un peu facile)
Jonathan M.
J'aime pas trop où je sais pas l'utiliser lol
Jj D.
ngdfhj
Christelle B.
Correspond bien

