BOOSPA PUMP 

Power: 3HP - 2200W - 800 L/min - Single-speed

Power: 0.5 HP – 370 watts – 270 liters/min
Maximum flow rate: 270 liters per minute
Includes 2 fittings for 1.5" (48 mm) piping
Pump with AMP plug

Direct replacement for the massage pump JA50 - LX

Quiet operation
Power: 1 HP – 700 watts
Includes 1 fitting for 1" (33 mm) hoses
Blower with AMP plug

Silent, compact, and easy to install
Power: 0.35 HP – 250 W
Maximum flow rate: 260 liters/min
Includes 2 fittings for 1.5" (48 mm) piping + AMP plug power cable + 4 anti-vibration mounts included.

Quiet and Low-Vibration Pump
Power: 2.0 HP – 1500 Watts – 220-240V – 50Hz
Maximum Flow Rate: 670 L/min
Includes 2" (Ø 60 mm) connectors
AMP plug cable

This pump model is retrofit, meaning it can replace any other spa pump with the same power rating (HP) and dimensions.

Power: 1 HP – 750 watts
Maximum flow rate: 350 liters/min
2 fittings for 1.5'' (48 mm) piping
Pump with connection cable and AMP connector.

Direct replacement for the massage pump DH1.0 - LX

This pump can also be used as a filtration pump thanks to its 2 speeds
Power: 3.0 HP – 2200 watts
Maximum flow rate: 730 liters/min
Includes 2 fittings for 2'' (60 mm) piping + connection cable with AMP connector.

Exact replacement for the massage pump WP300II - LX

Power: 2.0 HP – 1500 watts
Maximum flow rate: 640 liters/min
Includes 2 fittings for 2'' (60 mm) piping + connection cable with AMP connector

Direct replacement for the massage pump WP200II - LX

Included pump: 1 HP (750W)

Exclusively compatible with Waterway spas
Exact replacement for the Executive Euro dual-speed 3.2HP pump
3.0HP - 2200 watts - 730 liters/min - Dual-Speed
2 fittings for 2" (60mm) external diameter piping included
External thread diameter (Suction - Discharge): 78 mm
Pump with AMP plug
Exact replacement for the WP300II - LX massage pump

Dimensions: 160 x 175 x 125 mm
Central suction
Compatible with DH750 pump

Turbine for HSP1500 pumps
Compatible with HSP1500 pumps
Turbine outer diameter: 105mm
Outlet outer diameter: 59mm

Self-priming pump with built-in pre-filter and motor
Power: 2.0 HP – 1500 watts
Maximum flow rate: 560 liters per minute – value missing
Includes 2 fittings for 2'' (56 mm) piping

The SPP250E pump is suitable for pools with a volume between 90 and 120 m 3

Exclusively compatible with Jacuzzi spas
3.0HP - 2200 watts - 730 liters/min - Dual Speed
2 fittings for external diameter 2" (60mm) pipework included
External thread diameter (Suction - Discharge): 78 mm
Pump with AMP plug
Exact replacement for the massage pump WP300II - LX

Dimensions: 210 x 119 x 130 mm
Side suction
Compatible with HDP2200II pump

Self-priming pump with integrated pre-filter and motor
Power: 3.0HP - 2200 watts
Maximum flow rate: 480 liters per minute
2 fittings for 2" (60mm) piping included

Dimensions: 210 x 119 x 130 mm
Side suction
Compatible with HDP1500II pump

Mounting onto the wet end – secures the inlet and outlet ports
Width: 157 mm
Internal thread diameter: 47 mm
External thread diameter: 62 mm
Compatible with DH pumps

Plastic mounting part securing the motor to the hydraulic housing
Width: 180 mm
Outlet thread diameter: 79 mm
Compatible with HSP and HDP pumps

Diameter: 95 mm
Suction inlet diameter: 48 mm

Turbine for pump WCP250G
Compatible with WCP250G pumps from the brand BOOSPA PUMPS
Turbine outer diameter: 101mm
Outlet outer diameter: 51mm

Pump body compatible with WCP250G pumps
Suction and discharge thread: 62 mm
Impeller, gasket, seal, screws, flange included

Product reference: HDP1500

Exclusively compatible with HDP1500 pumps equipped with a single-speed motor.

Mounts onto the hydraulic body to secure water inlet and outlet connections.
Total width: 165 mm
Compatible with HSP and HDP pumps

Dimensions: 160 x 175 x 125 mm
Central suction
Compatible with DH370 pump

Width: 142 mm
Internal thread diameter: 47 mm
External thread diameter: 61 mm
Compatible with WCP250G pumps

Mounts onto the motor – provides support and protection for the motor block
Width: 156 mm
Thread diameter: 62 mm
Mounting hole spacing (width): 90 mm
Diagonal spacing: 125 mm
Compatible with DH pumps

Mounts onto the pump motor to secure the hydraulic assembly.
Diameter: 152 mm
Discharge thread diameter: 62 mm
Compatible with WCP250G pumps