Pool Pump SPP250E - 1500W - 2.0HP - single-speed
Self-priming pump with integrated pre-filter and motor.
Features
- IPX5 protection
- Power : 2.0 HP – 1500 watts - Single-speed
- Maximum flow rate : liters per minute
- Quiet operation
- Highly resistant motor body (anodized)
- High-quality mechanical seal highly resistant to spa chemicals
- Do not exceed an external temperature of 50°C
- Possible to elevate the pump to keep it out of the water if needed
- Overload protection
- Large pre-filter area to avoid too frequent maintenance
- Water pump draining device
- Suitable for pools with a volume between 90 and 120 m 3
Features of single-speed pumps from the SPP series:
Model
| Power
| V/Hz
| Qmax
(L/min)
| Hmax
(m)
| Pump Weight
| Packaging Dimensions (in mm)
|
| SPP150E | 750W/1.0HP | 220-240V/50Hz | 260 | 15 | 7,2 kgs | 600 x 205 x 350 |
| SPP200E | 1100W/1.5HP | 220-240V/50Hz | 360 | 16 | 9,4 kgs | 600 x 205 x 350 |
| SPP250E | 1500W/2.0HP | 220-240V/50Hz | 560 | 17 | 9,7 kgs | 600 x 205 x 350 |
Piping Connection
Comes with 2 connectors for 2" hoses (56 mm outer diameter) You can also reuse your old piping connectors if they are still functional.
If your piping differs, check out our
Fittings and Unions range to find the fitting corresponding to your piping.
Electrical Connection
The pump comes with a connection cable and AMP plug. You can keep your old cable to connect this new pump. If your plug is no longer usable, you can opt for new plugs in our Cables and Plugs for Spas section.
Here are the most used Plugs in the Spa world:
 |  |
| AMP Plug | J&J Plug
( PIN positions vary depending on the device) |
