Are you looking for spa pump parts? At Boospa, we specialize in providing spare parts for spas. Discover our wide selection of parts including pump bodies, mechanical seals, impellers, and much more! All our parts are made with high-quality materials to ensure maximum durability and optimal performance.
Spare parts for spa pumps
Are you looking for spa pump parts? At Boospa, we specialize in providing spare parts for spas. Discover our wide selection of parts including pump bodies, mechanical seals, impellers, and much more! All our parts are made with high-quality materials to ensure maximum durability and optimal performance.
328 products
LX
GM-210 LX Whirlpool Seal Kit
Mechanical set ensuring sealing between the electric motor and the pump body.
Includes mechanical part (spring) and carbon.
Compatible kit with all LX WHIRLPOOL pumps except DH1.0, WE10, and WE14 models.
Mechanical set ensuring sealing between the electric motor and the pump body.
Includes mechanical part (spring) and carbon.
Compatible kit with all LX WHIRLPOOL pumps except DH1.0, WE10, and WE14 models.
20,00 €
In stock
BALBOA INSTRUMENTS
Male AMP plug / connector + 4 crimp contacts
To connect your spa equipment directly to your electronic board.
Widely used in the spa industry, especially on Balboa Instruments control boxes.
5,50 €
In stock
LX
Carbon for spa blower motor
Allows the rotor to be powered by electric current.
Defective carbons are among the most common failures of blowers.
Allows the rotor to be powered by electric current.
Defective carbons are among the most common failures of blowers.
19,00 €
In stock
LX
Pump Body for LP and WP Series
Compatible with Lx Whirlpool LP300 and WP300 pumps
LX Rear Flange Reference: B436-14
92,00 €
In stock
WATERWAY
Special 3/8'' barbed x 1/4'' MPT Adapter
Reference Wateway 672-4350
High-quality ABS
Reference Wateway 672-4350
High-quality ABS
4,80 €
In stock
In stock
- New
GECKO
Composition : complete with its volute, turbine, mechanical seal, flange, and gasket.
Compatible with Gecko's Maelstrom MS-1 single and dual-speed pumps
156,00 €
In stock
- New
GECKO
Composition: complete with its volute, turbine, mechanical seal, flange, and gasket.
Compatible with the Maelstrom MS-1 single and dual-speed pumps from Gecko.
156,00 €
In stock
- New
GECKO
Gecko Reference: 0800-500002
Outer Diameter: 111 mm
Contains:
- Impeller
- Wear ring
24,00 €
In stock
TECMARK
Pneumatic Button for Blower and pneumatic pump
Allows to control the start/stop of the pneumatic device.
Diameter: 46mm
Allows to control the start/stop of the pneumatic device.
Diameter: 46mm
24,00 €
In stock
DXD
Seal kit for DXD pump
Compatible with all DXD pumps
Seal kit to repair leaks in your spa massage pump
Compatible with all DXD pumps
Seal kit to repair leaks in your spa massage pump
35,00 €
In stock
BOOSPA
Allows you to connect a part of your spa to the electronic board
Adaptable to boxes equipped with an "Amp" socket
19,00 €
In stock
DXD
Drainage plug for DXD and LX pumps
Compatible with DXD and LX pumps released before 2018
Thread diameter: 11.5mm
Plug + Gasket
Compatible with DXD and LX pumps released before 2018
Thread diameter: 11.5mm
Plug + Gasket
9,00 €
In stock
TECMARK
Pneumatic Button for Blower and pneumatic pump
Allows to control the start/stop of the pneumatic device.
Diameter: 42mm
Allows to control the start/stop of the pneumatic device.
Diameter: 42mm
24,00 €
In stock
AQUA-FLO
Seal kit for XP2E, XP2, XP3 AQUA-FLO-CIRC MASTER pump
Aqua-flo reference: 92500150
Aqua-flo reference: 92500150
39,00 €
In stock
BOOSPA
Female AMP Connector Plug
Mainly used to convert an AMP cable to Mini-JJ.
6,00 €
In stock
BOOSPA
Allows you to connect a part of your spa to the electronic board
Adaptable to boxes equipped with an "Amp" socket
18,00 €
In stock
LX
Turbine (impeller) Diameter 107mm - LX WHIRLPOOL
Turbine Diameter: 107mm
Compatible with LP200 and WP200 pumps.
Turbine Diameter: 107mm
Compatible with LP200 and WP200 pumps.
29,00 €
In stock
LX
Turbine (impeller) LP/WP Diameter 113mm - LX WHIRLPOOL
Compatible with LX LP250 and WP250 pumps
Compatible with LX LP250 and WP250 pumps
29,00 €
In stock
WATERWAY
Manufacturer reference: 319-3100B
Mechanical seal for Waterway pumps
Includes: mechanical part (spring) + ceramic part (stator) + seal
Mechanical seal for Waterway pumps
Includes: mechanical part (spring) + ceramic part (stator) + seal
20,40 €
In stock
US SEAL
Mechanical Seal Lubricant (Seal Kit) for Spa Pump
Allows for efficient installation of your seal kits to maintain a perfect seal.
Single-use
Allows for efficient installation of your seal kits to maintain a perfect seal.
Single-use
18,00 €
In stock
LX
Anti-vibration mounts for Lx Whirlpool LP series pump: LP150 / LP200 / LP250 / LP300
Motor feet designed to reduce vibrations.
Corresponds to parts 56 and 57 on the exploded view.
Motor feet designed to reduce vibrations.
Corresponds to parts 56 and 57 on the exploded view.
11,00 €
In stock
LX
Turbine (impeller) for WP300 LX WHIRLPOOL massage pump
Turbine diameter: 118mm
29,00 €
In stock
BALBOA INSTRUMENTS
Mechanical Seal Kit 1213004 for Balboa Spa Pumps
Compatible with pumps:
Hi-flow, Varimax, Durajet, 103100-NHP, 1023110-NHP, Niagara, and HA440NG
Compatible with pumps:
Hi-flow, Varimax, Durajet, 103100-NHP, 1023110-NHP, Niagara, and HA440NG
26,00 €
In stock
BOOSPA
16µ spa pump capacitor
Enables the starting of a spa pump
Adaptable to most pumps
Enables the starting of a spa pump
Adaptable to most pumps
24,00 €
In stock
BOOSPA
7µF Spa Pump Capacitor for Spa Pumps
Enables the startup of a circulation pump.
Enables the startup of a circulation pump.
29,00 €
In stock
LX
Flange gasket for LX Whirlpool LP LP200 and LP300 series pumps
For flange reference B436-10
For flange reference B436-10
9,00 €
In stock
WATERWAY
Flange gasket for Executive Euro Waterway pump
Waterway reference: 805-0261
Waterway reference: 805-0261
10,00 €
In stock
45,00 €
In stock
HYDRO AIR
Pneumatic Button for Blower and Pneumatic Pump
To be used with pneumatic blowers and pumps from the Balboa Hydroair range
Allows for controlling the start, speed, and stop of the air blower
To be used with pneumatic blowers and pumps from the Balboa Hydroair range
Allows for controlling the start, speed, and stop of the air blower
15,00 €
In stock
In stock
BOOSPA
30µF Spa Pump Capacitor for Spas Pumps
Allows the starting of a massage pump.
Allows the starting of a massage pump.
16,80 €
In stock
LX
Pump Body for LP and WP Series
Compatible with Lx Whirlpool pumps LP200/250 and WP200/250
LX back flange reference: B445-02
Compatible with Lx Whirlpool pumps LP200/250 and WP200/250
LX back flange reference: B445-02
90,00 €
In stock
AQUA-FLO
Flange Gasket for AQUAFLO XP2 and XP2E Pumps
Aquaflo Reference: 92200301
Aquaflo Reference: 92200301
12,00 €
In stock
TECMARK
Pneumatic Button for Blower and pneumatic pump
Allows to control the start/stop of the pneumatic device.
Diameter: 44mm
Allows to control the start/stop of the pneumatic device.
Diameter: 44mm
32,00 €
In stock
LX
Turbine (impeller) for LX WHIRLPOOL WTC50M pump
Turbine diameter: 105 mm 29,00 €
In stock
19,00 €
In stock
In stock
SIREM
Fan for Sirem Spa Pump
Fan compatible with all Sirem pump models
Outer diameter: 113mm
Inner diameter: 11mm
32,00 €
In stock
BOOSPA
40µF Spa Pump Capacitor for Spa Pumps
Facilitates the start-up of a massage pump.
18,00 €
In stock
GECKO
1/4" Drain Plug for Gecko Spa Pump
1/4'' Drain Plug for Gecko pump series Flo-Master XP2, Flo-Master XP2e, and Flo-Master XP3
1/4'' Drain Plug for Gecko pump series Flo-Master XP2, Flo-Master XP2e, and Flo-Master XP3
8,00 €
In stock
WATERWAY
319-3090B Mechanical Seal Kit for Waterway Pumps
Seal kit to repair leaks between the pump body and the motor
Compatible with Waterway SVL56 High Flow, Champion 56 Frame, Executive, Spa-Flo, Iron Might, Hi-Flo Side Discharge, CSA Hi-Flo Side Discharge, Center Discharge, Workman pumps.
Seal kit to repair leaks between the pump body and the motor
Compatible with Waterway SVL56 High Flow, Champion 56 Frame, Executive, Spa-Flo, Iron Might, Hi-Flo Side Discharge, CSA Hi-Flo Side Discharge, Center Discharge, Workman pumps.
24,00 €
In stock
12,00 €
In stock
AQUA-FLO
Turbine (impeller) for XP2 3HP massage pump
AQUAFLO Reference: 3HP: 91694300 38,40 €
In stock
1,00 €
In stock
HYDRO AIR
Pneumatic Button for Blower and Pneumatic Pump
To be used with pneumatic blowers and pumps from the Balboa Hydroair range
Allows for controlling the start, speed, and stop of the air blower
To be used with pneumatic blowers and pumps from the Balboa Hydroair range
Allows for controlling the start, speed, and stop of the air blower
14,40 €
In stock
WATERWAY
Top Load Filtration System Cover
Reference WATERWAY: 511-1000
Inner Diameter: 158 mm
Outer Diameter: 141 mm
Gasket sold separately
Reference WATERWAY: 511-1000
Inner Diameter: 158 mm
Outer Diameter: 141 mm
Gasket sold separately
38,00 €
In stock
LAING / XYLEM
Repair Kit for Laing E14 Pump (Rotor R109)
Only suitable for Laing E14 circulation pumps.
Only suitable for Laing E14 circulation pumps.
114,00 €
In stock
Feel free to browse through our selection of spa pump parts and contact us for any questions or assistance needed.
Herve R.
Conforme
Herve R.
conforme
Olivier G.
C'est exactement le modèle que nous recherchons pour notre jacuzzi.
Didier T.
Livraison rapide!👍
Christophe M.
Parfait
Gilles C.
pièce conforme
Guy V.
Conforme à ma recherche
Bernard B.
Nickel conforme a la pièce originale .
Laurent G.
Corps de pompe pleinement compatible avec ma pompe WP300. Montage simple.
DIDIER M.
Légèrement différente de la pièce d'origine lp300 lx concernant la hauteur du raccord de refoulement plus basse. Il a été nécessaire de rallonger la tubulure concernée de 10 mm environ