Spare parts for spa pumps (page 5)
328 products
Attaches to the front of the pump.
Compatible with Sirem's L Series PB pumps.
2HP: 310-4210 / 3HP: 310-4200 / 4HP: 310-4190 / 5HP: 310-4180
Outer diameter of 15 cm
2HP: 310-4210 / 3HP: 310-4200 / 4HP: 310-4190 / 5HP: 310-4180
56 Frame Motor
Compatible with Waterway and Aqua-Flo pumps
Single or Two-speed - 2 and 3 HP
Part that attaches to the pump motor.
Compatible with PB pumps with 16mm diameter seals and impellers.
Compatible with Waterway pumps - Frame 48 Motor
Diameter: 160 mm
2HP: 310-4210 / 3HP: 310-4200 / 4HP: 310-4190 / 5HP: 310-4180
Compatible with Flo II 1.5HP WATERWAY pumps
Only suitable for E10 pumps
Bearing not included
56 Frame Motor
Compatible with Executive Euro pumps - 5HP with 94mm suction.
Dimensions: 160 x 175 x 125 mm
Central suction
Compatible with DH750 pump
This kit ensures the sealing of the pump body.
Compatible with XP2e pumps 1.5HP, 2HP, and 2.5HP
56 frame: 104 x 148mm
Includes: impeller, mechanical seal, flange gasket, screws, two flanges, and drain plug.
Outer diameter: 135mm
Compatible with massage pumps from the PB range by Sirem
Pump support for LX Whirlpool pumps
Compatible with all TDA pumps, from TDA50 to TDA200
Female Amp plug to connect to a pre-wired dual-speed pump with an Amp plug.
Turbine for HSP1500 pumps
Compatible with HSP1500 pumps
Turbine outer diameter: 105mm
Outlet outer diameter: 59mm
Side suction
Compatible with HSP2200 pump
Manufacturer's reference: DXD-310-backplate
Dimensions: 155 x 155 x 85mm
Compatible with XP2e 1.5HP, 2HP, and 2.5HP pumps
56 frame: 104 x 148mm
Length: 190 mm
Width: 160 mm
Depth: 173 mm
Manufacturer's reference: 11-XT14-50
Cables included for: ozonator - 1 massage pump - 1 blower - lighting
Output type: male AMP
Compatible with Executive Euro pumps - WATERWAY
56 and 48 Frames - Impeller, gasket, flange seal included
Various power options available - 78mm suction and discharge
Outer diameter: 93mm
Rear Flange for LX Whirlpool Pump
Corresponds to part number 10 in the exploded view
Flange reference: B451-01
Cover with tightening points
Gasket sold separately
Used to start the low speed of a Sirem massage pump for Aquamarine spas.
48 Frame Motor
Compatible with Executive Euro 94mm - 5HP pumps
2 models: 78mm or 94mm suction
Compatible with WATERWAY Executive Euro pumps
Compatible with: DXD-310A, DXD-310C, DXD-310D, DXD-310B, DXD-310X, DXD-310Y, and DXD-310Z.
Compatible with Executive Euro pumps - WATERWAY
56 and 48 Frames - Impeller, shaft seal, flange gasket included
Various power options available - 78mm suction and discharge
BALBOA Reference: 1212215
Compatible with circulation pump
Compatible with Hi Flo 1.5HP WATERWAY pumps
Compatible with Waterway Tiny Might pumps
Compatible with Executive Euro pumps - WATERWAY
56 and 48 Frames - Impeller, seal, flange gasket included
Various power options available - 78mm suction and discharge
1/4'' Drain Plug for Aqua-Flo Gecko pump series: Circ Master and Flo Master
Thickness: 3 mm
Inner diameter: 170 mm
Compatible with all Wiper3 pumps
2HP: 310-4210 / 3HP: 310-4200 / 4HP: 310-4190 / 5HP: 310-4180
Herve R.
Conforme
Herve R.
conforme
Olivier G.
C'est exactement le modèle que nous recherchons pour notre jacuzzi.
Didier T.
Livraison rapide!👍
Christophe M.
Parfait
Gilles C.
pièce conforme
Guy V.
Conforme à ma recherche
Bernard B.
Nickel conforme a la pièce originale .
Laurent G.
Corps de pompe pleinement compatible avec ma pompe WP300. Montage simple.
DIDIER M.
Légèrement différente de la pièce d'origine lp300 lx concernant la hauteur du raccord de refoulement plus basse. Il a été nécessaire de rallonger la tubulure concernée de 10 mm environ
