Spare parts for spa pumps (page 7)
328 products
Outer diameter 11.5 cm
Plastic mounting part securing the motor to the hydraulic housing
Width: 180 mm
Outlet thread diameter: 79 mm
Compatible with HSP and HDP pumps
Pump body compatible with WCP250G pumps
Suction and discharge thread: 62 mm
Impeller, gasket, seal, screws, flange included
- Silens 75/100/150/200M-T/300
- T-WIPER3 150/200/150 2P
- Wiper 3 200M
Mounts onto the hydraulic body to secure water inlet and outlet connections.
Total width: 165 mm
Compatible with HSP and HDP pumps
Corresponds to parts: 17-18-23-21-24-25-26-28-33
Dimensions: Length 12 cm x Width 9 cm x Height 5 cm
Dimensions: 160 x 175 x 125 mm
Central suction
Compatible with DH370 pump
Thread diameter: 3.8mm
Corresponds to part number 13 in the exploded view
LX Reference: 351-01
Stainless steel screw used in ASD AR-700 blowers
Supplied with nuts
Mounting onto the wet end – secures the inlet and outlet ports
Width: 157 mm
Internal thread diameter: 47 mm
External thread diameter: 62 mm
Compatible with DH pumps
- New
Gecko Reference: 0800-500003
Contains:
- Impeller
- Wear ring
GM-200 LX Whirlpool Seal Kit
Mechanical set ensuring the seal between the electric motor and the pump body.
Includes the mechanical part (spring) and carbon.
Compatible kit with DH1.0 LX WHIRLPOOL pumps
Dimensions: 118mm x 60.5 x 48 x 10.7mm
No wear ring
Connector plug with cable for Dual-Speed Pump
Plug Type: Female AMP
Number of Pins: 4
Flange for DH1.0 LX Whirlpool circulation pump
Height 146 mm
Width 155 mm
Allows the starting of an Argonaut spa pump
Compatible with the following Argonaut pumps: AV150
Mechanical seal kit for Spa pump
Compatible with pumps from many manufacturers: Arneson Products, Baker Hydro, Doughboy, Gecko, Hayward, Jacuzzi®, Purex, Speck, Sta-Rite
Turbine (impeller) for pump 1023100 and 1023110
BALBOA Reference: 1212370
Compatible with single-speed and dual-speed pumps
Compatible with pumps DXD-310A, DXD-310C, DXD-310D, DXD-310B, DXD-310X, DXD-310Y, DXD-310Z, and DXD-300E
Not compatible with DXD-310E
25µF Capacitor for Argonaut Spa Pump
Facilitates the startup of an Argonaut spa pump
Compatible with the following Argonaut pumps: AV200 and AV250
Flange Gasket for Argonaut BALBOA Pump
Emerson Aqua-Flo Circmaster pump body
Compatible with Emerson Circmaster pumps - 50hz
AQUAFLO Reference: 5HP: 91695500
Silent blocks for Lx Whirlpool pump from the LP series: LP150 / LP200 / LP250 / LP300
Motor feet to reduce vibrations.
Corresponds to parts 56 and 57 on the exploded view.
HA460 Pump Body - Centered suction
Length: 180 mm
Width: 160 mm
Depth: 110 mm
The deflector is an essential component that prevents liquid from rising in case of pump body leakage.
This deflector is compatible with pumps equipped with 12mm diameter seals, specifically for all models of Sirem pumps H, K, or L and N with this seal/turbine diameter.
Executive Euro 94mm Pump Body - 3HP
48 Frame Motor
Compatible with Executive Euro 94mm - 3HP pumps
Front Flange for LX WP/LP Series Pump
A wear ring will be included with the 21mm version (see item description for details)
Outer diameter of 18 cm
Diameter: 112mm
Reference: PP0-GF20 or 124290
Reference WATERWAY:
2HP: 310-4030 / 3HP: 310-4020 / 4HP: 310-4050
Compatible especially with heaters and blowers from the Lx Whirlpool brand
Directly mounts on a pressure switch / flow detector
Manufacturer's Reference: G5T16
Body diameter: 192mm
Outer thread diameter: 78mm
Fan for Pump (Pool, Flipper, Silver)
Fan compatible with many pumps from ESPA
Outer diameter: 119mm
ESPA Reference: 1040
ESPA Reference: 125402
Diameter: 94.50 mm
Color: white
Motor for 56 Frame pump - WATERWAY
56 Frame motor
Compatible with Waterway and Aqua-Flo pumps
Single or Dual speed - 2 and 3 HP
XP2e Aqua-Flo Pump Body
Compatible with XP2e 1.5HP, 2HP, and 2.5HP pumps
56 frame: 104 x 148mm
Herve R.
Conforme
Herve R.
conforme
Olivier G.
C'est exactement le modèle que nous recherchons pour notre jacuzzi.
Didier T.
Livraison rapide!👍
Christophe M.
Parfait
Gilles C.
pièce conforme
Guy V.
Conforme à ma recherche
Bernard B.
Nickel conforme a la pièce originale .
Laurent G.
Corps de pompe pleinement compatible avec ma pompe WP300. Montage simple.
DIDIER M.
Légèrement différente de la pièce d'origine lp300 lx concernant la hauteur du raccord de refoulement plus basse. Il a été nécessaire de rallonger la tubulure concernée de 10 mm environ