Spare parts for spa pumps (page 6)
327 products
1/4'' Drain Plug for Aqua-Flo Gecko pump series: Circ Master and Flo Master
2HP: 310-4210 / 3HP: 310-4200 / 4HP: 310-4190 / 5HP: 310-4180
Gecko Reference: 0800-500002
Outer Diameter: 112 mm
Contains:
- Impeller
- Wear ring
Compatible fan cover for many pumps by ESPA
Outer diameter: 140mm
ESPA Reference: 10433
Compatible with Circmaster pumps
2 models: CMCP and CMHP
Gecko Reference: 0800-500003
Contains:
- Impeller
- Wear ring
All powers: 319-1390
Replaces the motor of Ultra 9000 blowers from generations .... .
Allows for replacing only the defective motor instead of the entire blower.
Compatible with older WATERWAY pumps
48 Frame Motor
Compatible with Executive Euro 94mm - 4HP pumps
Suitable for Sirem massage pumps H/K/L types
Housing for fixing capacitors
Supplied with its screws
Stainless steel screws used in the ASD AR-700 blower
Provided with nuts
Dimensions: 210 x 119 x 130 mm
Side suction
Compatible with HDP2200II pump
ABB Reference: 1SAM250000R1011
Ensures the safety of the spa during electrical fluctuations
Three-phase 7.5 kW
10 - 16A - 690 V AC - 50-60Hz
This box allows you to power a filtration pump along with your lighting system.
It also features a programmable timer for the filtration time.
Manufacturer reference: 4405010437
Dimensions: inner diameter 118 mm x thickness 4 mm
Compatible with Executive Euro pumps - WATERWAY
56 and 48 Frames - Impeller, seal, flange gasket included
Various power options available - 78mm suction and discharge
Pump body component
5 models
Plastic mounting part securing the motor to the hydraulic housing
Width: 180 mm
Outlet thread diameter: 79 mm
Compatible with HSP and HDP pumps
Pump body compatible with WCP250G pumps
Suction and discharge thread: 62 mm
Impeller, gasket, seal, screws, flange included
- Silens 75/100/150/200M-T/300
- T-WIPER3 150/200/150 2P
- Wiper 3 200M
Mounts onto the hydraulic body to secure water inlet and outlet connections.
Total width: 165 mm
Compatible with HSP and HDP pumps
Corresponds to parts: 17-18-23-21-24-25-26-28-33
Dimensions: Length 12 cm x Width 9 cm x Height 5 cm
Dimensions: 160 x 175 x 125 mm
Central suction
Compatible with DH370 pump
Thread diameter: 3.8mm
Corresponds to part number 13 in the exploded view
LX Reference: 351-01
Stainless steel screw used in ASD AR-700 blowers
Supplied with nuts
Mounting onto the wet end – secures the inlet and outlet ports
Width: 157 mm
Internal thread diameter: 47 mm
External thread diameter: 62 mm
Compatible with DH pumps
Allows for securing a spa pump
Not compatible with all pumps
Outer Diameter: 175mm
Compatible with Waterway Futura 3 massage pumps
ESPA Reference: 10394
Dimensions: H120 x L120 x W55 mm
Compatible with all versions of ESPA Wiper3 pump.
Tested & Functional
Product Specificity: Missing a slight part (aesthetic) and some visible signs of use
Specifications: Inner Diameter: 130mm / Discharge Thread Diameter: 62mm / Height: 73mm
Flange Reference: B451-01
Mounts onto the motor – provides support and protection for the motor block
Width: 156 mm
Thread diameter: 62 mm
Mounting hole spacing (width): 90 mm
Diagonal spacing: 125 mm
Compatible with DH pumps
Composition: complete with its volute, turbine, mechanical seal, flange, and gasket.
Compatible with the Maelstrom MS-1 single and dual-speed pumps from Gecko.
Product reference: HDP1500
Exclusively compatible with HDP1500 pumps equipped with a single-speed motor.
Composition: Turbine, O-ring, flange, 4 long screws, nuts, and washers
Compatible with Koller pumps 146-200-WE
Composition : complete with its volute, turbine, mechanical seal, flange, and gasket.
Compatible with Gecko's Maelstrom MS-1 single and dual-speed pumps
Turbine for pump WCP250G
Compatible with WCP250G pumps from the brand BOOSPA PUMPS
Turbine outer diameter: 101mm
Outlet outer diameter: 51mm
Dimensions: 210 x 119 x 130 mm
Side suction
Compatible with HDP1500II pump
This box allows the start and stop of a device through pneumatic action.
Tamas O.
.......
Tamas O.
......
Laurent N.
Faudrais avoir plusieurs dimensions et pas juste 1 taille,avec l etui en cuivre autour comme ceux d origine
Jean-Louis M.
Produit correspond à la description.
Claude O.
Mon fournisseur n'a pas cette pièce dans les pièces détachées et heureusement que j'ai pu la trouver chez Boospa.
Remi G.
Ne convient pas car il ne déclanche pas l'interrupteur
Herve R.
Conforme
Herve R.
conforme
Olivier G.
C'est exactement le modèle que nous recherchons pour notre jacuzzi.
Didier T.
Livraison rapide!👍
