We have a wide selection of spare parts in stock for various manufacturers such as Aquaspa, Mspa, and Intex. We stock a wide variety of spare parts for inflatable spas at competitive prices, so you can repair and maintain your spa in good working condition.
Manufacturer parts
We have a wide selection of spare parts in stock for various manufacturers such as Aquaspa, Mspa, and Intex. We stock a wide variety of spare parts for inflatable spas at competitive prices, so you can repair and maintain your spa in good working condition.
184 products
MSPA
Set of 2 filters for MSPA inflatable spas
Filter diameter: 107 mm
Filter height: 68.5mm
Top: open, inner diameter 32mm
Bottom: open, inner diameter 55mm
10,80 €
In stock
MSPA
Pressure gauge for MSPA inflatable spa
Compatible with all MSPA inflatable spas
MSPA reference: B9300637
Compatible with all MSPA inflatable spas
MSPA reference: B9300637
23,00 €
In stock
MSPA
Inflation valve + cap for Mspa spas
Reference MSPA: B0800016
Compatible with all generations of MSPA spas
Not compatible with the Tuscany model
14,40 €
In stock
MSPA
Set of 6 filters for MSPA inflatable spas
Filter diameter: 107 mm
Filter height: 68.5mm
Top: open, inner diameter 32mm
Bottom: open, inner diameter 55mm
26,40 €
In stock
MSPA
Spa Mspa Bubble Suction Nozzle
Compatible with all generations of Bubble spas
Compatible with all generations of Bubble spas
12,00 €
In stock
MSPA
Drain plug for Mspa spas
MSPA Reference: B9300171
Compatible with all generations of MSPA spas
Not compatible with the Tuscany model
MSPA Reference: B9300171
Compatible with all generations of MSPA spas
Not compatible with the Tuscany model
12,00 €
In stock
AQUASPA
Inner drain plug
for Aquaspa, Ospazia, Becool II, Alton family, Hespéride, Lumix, Infinite Spa hot tubs
To be attached at the bottom of your inflatable spa.
You will receive one of the 2 versions depending on stock availability (see photos) - Same dimensions.
for Aquaspa, Ospazia, Becool II, Alton family, Hespéride, Lumix, Infinite Spa hot tubs
To be attached at the bottom of your inflatable spa.
You will receive one of the 2 versions depending on stock availability (see photos) - Same dimensions.
19,00 €
In stock
In stock
In stock
MSPA
MSPA Filter Adapter with Peg
MSPA Reference: B9301402
Adapter that allows the use of MSPA filters. Compatible spa models are those with two connections to their motor block (one for water return and one for suction (where you place your filter).
MSPA Reference: B9301402
Adapter that allows the use of MSPA filters. Compatible spa models are those with two connections to their motor block (one for water return and one for suction (where you place your filter).
10,00 €
In stock
AQUASPA
Heater Block + Circulation Pump for Inflatable Spa
Ospazia, Aquaspa, Sunbay, Bcool II, Lumix, Infinite Spa...
To be installed inside the motor block.
For spas from 2010
Ospazia, Aquaspa, Sunbay, Bcool II, Lumix, Infinite Spa...
To be installed inside the motor block.
For spas from 2010
69,00 €
In stock
MSPA
Transformer for MSPA LITE spa
Compatible with the LITE spa generation
79,00 €
In stock
AQUASPA
Spa Thermal Heater
Double resistance - Increased reliability
To be installed inside the motor block
Power: 1800W
NOT compatible with spas equipped with old single resistance heaters
Double resistance - Increased reliability
To be installed inside the motor block
Power: 1800W
NOT compatible with spas equipped with old single resistance heaters
59,00 €
In stock
BOOSPA FILTER
Replacement Filter for MSPA Inflatable Spa - BlueWater® Filtration
Anti-microbial Filtration
Diameter: 11 cm
Height (including tabs): 12.1 cm
Height (excluding tabs): 10.6 cm
Top: Closed
Bottom: Open, diameter 7.5 cm
Anti-microbial Filtration
Diameter: 11 cm
Height (including tabs): 12.1 cm
Height (excluding tabs): 10.6 cm
Top: Closed
Bottom: Open, diameter 7.5 cm
15,00 €
In stock
MSPA
This protective sock is compatible with all MSPA filters
but also with the majority of inflatable spa filters of similar dimensions
MSPA Reference: B9301472
Prevents E1 code risks
Filter not included
but also with the majority of inflatable spa filters of similar dimensions
MSPA Reference: B9301472
Prevents E1 code risks
Filter not included
14,00 €
In stock
MSPA
This MSPA kit is compatible with MSPA inflatable spas having only one outlet on the inner wall of the pool.
MSPA Reference: B9301467
Prevents E1 error risks
This kit includes: 1 MSPA filter, 1 protective sock, and 1 return/suction nozzle
MSPA Reference: B9301467
Prevents E1 error risks
This kit includes: 1 MSPA filter, 1 protective sock, and 1 return/suction nozzle
12,00 €
In stock
AQUASPA
Circulation pump for Ospazia, Aquaspa, Bcool II, Lumix, Infinite Spa..
To be installed inside the motor block.
For spas from 2010
69,00 €
In stock
MSPA
Backflow Nozzle for MSPA Spa Bubble
Compatible with all generation of MSPA Bubble spa
9,60 €
In stock
MSPA
Check valve for ozone injector
This check valve is installed on the air hose that connects the ozonator to the ozone injector. Connects to a 1/2" hose.
Compatible with MSPA Lite 2015 premium spas and MSPA premium spas
Diameter +: 19 mm
Diameter -: 5 mm
9,60 €
In stock
MSPA
Drainage Adapter for MSPA Spa
Compatible with all generations of MSPA spas
Allows you to connect your drainage nozzle to a garden hose.
Compatible with all generations of MSPA spas
Allows you to connect your drainage nozzle to a garden hose.
24,00 €
In stock
MSPA
Elite / Premium / Lite 2015 Heater for MSPA Inflatable Spas
Compatible with MSPA spas of the PREMIUM / ELITE / LITE 2015 generation.
Compatible with MSPA spas of the PREMIUM / ELITE / LITE 2015 generation.
1500W
MSPA Reference: B9301195
MSPA Reference: B9301195
Equipped with an earthing plug
96,00 €
In stock
MSPA
Manufacturer reference: M1801-PB
Compatible MSPA motor block: Delight, Comfort Lite (generation from 2020)
Compatible with MSPA Europe spas only
129,00 €
In stock
MSPA
Manufacturer reference: B9301597
Attention, the circuit board is sold separately
60,00 €
In stock
MSPA
Plug equipped with a pressure gauge for MSPA Delight inflatable spa
MSPA Reference: B9301394
This plug allows you to measure the air pressure in your spa
Compatible with all MSPA Delight spas
Seal included
MSPA Reference: B9301394
This plug allows you to measure the air pressure in your spa
Compatible with all MSPA Delight spas
Seal included
18,00 €
In stock
MSPA
Seal for MSPA Lite pump
Positioned between the pump and the heater
Compatible only with MSPA Lite spas
MSPA Reference: B9301053
Positioned between the pump and the heater
Compatible only with MSPA Lite spas
MSPA Reference: B9301053
Outer diameter: 32 mm
7,00 €
In stock
AQUASPA
Electronic board located behind the keyboard included
Keyboard dimensions: 128 mm x 84 mm
Color: red
Compatible with brands: Alton Family, Aquaspa, Bcool 2, Bcool III, Garden Allstore, Hesperide, Sunbay.
Keyboard dimensions: 128 mm x 84 mm
Color: red
Compatible with brands: Alton Family, Aquaspa, Bcool 2, Bcool III, Garden Allstore, Hesperide, Sunbay.
75,00 €
In stock
AQUASPA
Protective sock for inflatable spa filter.
Protects your filter during bathing.
Extends the life of your filters.
Compatible with Aquaspa, Ospazia, Hesperide, Alton Family, Mspa filters, etc.
Protects your filter during bathing.
Extends the life of your filters.
Compatible with Aquaspa, Ospazia, Hesperide, Alton Family, Mspa filters, etc.
19,00 €
In stock
MSPA
Compatible with MSPA Bubble premium generation spas
ATTENTION, NEW PUMP DESIGN BUT STILL COMPATIBLE
109,00 €
In stock
AQUASPA
Inflation valve + cap for inflatable spa
Compatible with Ospazia, Aquaspa, Bcool II, Alton Family, Hesperide, Sunbay spas.
Compatible with Ospazia, Aquaspa, Bcool II, Alton Family, Hesperide, Sunbay spas.
17,00 €
In stock
MSPA
Temperature sensor for MSPA New 2 + / LITE / Premium spa
Compatible with New 2 + / LITE / Premium spa generations
MSPA reference: B9300983
Compatible with New 2 + / LITE / Premium spa generations
MSPA reference: B9300983
19,00 €
In stock
AQUASPA
Flow sensor for inflatable spa
Compatible with many brands of inflatable spas
Seal not supplied, the product remains compatible.
39,00 €
In stock
MSPA
Clip-on Cover for Square Inflatable MSPA Spa
Thermally insulating protection attachable with clips.
Protects and retains heat in your spa.
6-seater model for square spas
109,00 €
Restocking in progress
MSPA
Manufacturer reference: B9301544 / B9301426
Dimensions: 170 x 95 mm
Equipped with a UVC touch
109,00 €
In stock
BOOSPA
AquaspaDimensions:
Height: 83 mm
Diameter: 104 mm
Inner thread diameter #1: 60 mmInner thread diameter #2: 31mm
22,00 €
In stock
AQUASPA
Transformer for inflatable spas Aquaspa, Ospazia, Hesperide, Be Cool 2, Sunbay..
To be installed inside the motor block.
Input: 240V - 50Hz - 0.3A
To be installed inside the motor block.
Input: 240V - 50Hz - 0.3A
Output: 11.6V - 3.3A
58,50 €
In stock
MSPA
Replacement pump + heater pack for MSPA spa
Compatible with MSPA Gen2, Gen2+, and New2+ motor blocks
Includes pump, heater, and union gasket
Compatible with MSPA Gen2, Gen2+, and New2+ motor blocks
Includes pump, heater, and union gasket
134,00 €
In stock
AQUASPA
Drain plug for inflatable spa
Compatible with Ospazia, Aquaspa, Bcool II, Sunbay, Hespéride, Lumix, Infinite Spa, and more..
Compatible with Ospazia, Aquaspa, Bcool II, Sunbay, Hespéride, Lumix, Infinite Spa, and more..
19,00 €
In stock
MSPA
White PVC inflatable spa cover for MSPA inflatable spas.
For 4-person or 6-person spas.
69,00 €
In stock
MSPA
LITE 2020 / Delight Keypad for Mspa inflatable spas
Compatible with MSPA Bubble spas of LITE 2020 and DELIGHT generation
Old MSPA reference: B9301192
New MSPA reference: B9301278
Sold without cable
89,00 €
In stock
AQUASPA
Screw your filter onto this inflatable spa suction nozzle
Compatible with many inflatable spa brands
Diameter: 59 mm
Compatible with many inflatable spa brands
Diameter: 59 mm
39,00 €
In stock
MSPA
Mspa Spa Nozzle Removal Tool
Compatible with all generations of MSPA spas.
Compatible with all generations of MSPA spas.
17,00 €
In stock
MSPA
Outlet elbow for MSPA inflatable spa
Compatible with all MSPA generations
Compatible with all MSPA generations
49,00 €
In stock
MSPA
LITE 2015 Electronic Board for MSPA Spa
Compatible with 2015 LITE generation MSPA Bubble spas.
Compatible with 2015 LITE generation MSPA Bubble spas.
96,00 €
In stock
MSPA
Inflatable Square Cover for MSPA Inflatable Spa
MSPA Reference: B0301976 - B0302010
White PVC cover for inflatable spas.
2 models: 4-seater (120cm x 120cm) and 6-seater (150cm x 150cm).
MSPA Reference: B0301976 - B0302010
White PVC cover for inflatable spas.
2 models: 4-seater (120cm x 120cm) and 6-seater (150cm x 150cm).
69,00 €
In stock
MSPA
Suction / Discharge Nozzle is compatible with MSPA inflatable spas having a single outlet in their pool going towards their motor block
MSPA Reference: B9301403
MSPA Reference: B9301403
12,00 €
Restocking in progress
AQUASPA
Inflatable Spa Hose
Compatible with Aquaspa, Ospazia, Becool II, Alton family, Hespéride, Lumix, Infinite Spa..
Compatible with Aquaspa, Ospazia, Becool II, Alton family, Hespéride, Lumix, Infinite Spa..
25,00 €
In stock
AQUASPA
Inflatable spa temperature sensor for Alton Family, Aquaspa, Bcool 2, Bcool II, bespa, Garden Allstore, Hesperide, Losiane, Ospazia, Spark, Sunbay, Water Health
Sensor length: 25 mm
Sensor length: 25 mm
39,00 €
In stock
BOOSPA
Ospazia
Dimensions:
Height: 83 mm
Diameter: 104 mm
Inner diameter thread #1: 60 mm
Inner diameter thread #2: 31 mm
36,00 €
In stock
All our parts are compatible with various models of spas from the brands Aquaspa, Mspa, and Intex, and are delivered directly to your doorstep. We understand that the availability of spare parts is crucial for the longevity of your spa, which is why we are committed to providing quality service for all products listed on our site.
Feel free to browse our selection of spa spare parts by manufacturer to find the compatible product you need.
Frédéric C.
Parfait
Frédéric C.
Parfait
Nathalie N.
Parfait
Frédéric C.
Parfait
Frédéric C.
Parfait
Frédéric C.
Parfait
Maimouna C.
Parfait
Michel O.
Bouchon un peu cher
Maimouna C.
Parfait
Christophe C.
Photo non contractuelle (c un peu facile)