Manufacturer parts (page 2)
170 products
Sensor length: 25 mm
Repair Kit for MSPA Inflatable Spas
Available in 2 colors: Black or Transparent
Sold in a pack of 2 fittings of 15cm X 10cm each
Glue included
Attention: this board is the spa's motherboard and is located in the motor block. It is not the one located under the control panel.
Compatible with Elite & Premium spas
MSPA reference: B9300933
MSPA reference: B0301560
Compatible with MSPA Bubble spas of Gen 2 / Gen 2+ / New 2+ generation
AC 230V - 50 Hz - 900 W
Reference MSPA: B9300679
Compatible with MSPA Bubble Lite and Lite 2015 generation spas / Not compatible with Lite 2020 generations
Compatible with all MSPA models.
White PVC inflatable spa cover by MSPA for inflatable spas.
For 4-seater or 6-seater spas.
Positioned between the pump and the heater
Manufacturer reference: B9301613
Compatible with MSPA LITE 2020/2021/2022 spas with or without UVC
includes UV option
Blower (air blower) for Aquaspa, Ospazia, Bcool-II, Alton Family, Heperide, Sunbay, Lumix, Infinite Spa...
To be installed inside the motor block.
Allows detecting the presence of flow in the heater circuit
MSPA reference: B9301234
Compatible with MSPA Delight generation spas
Water filling
Repair Kit for MSPA Inflatable Spas
Available in 2 colors: Black or Transparent
Sold in a set of 2 connectors measuring 15cm X 10cm each
Glue included
Compatible with 2020 Lite generation MSPA spas
MSPA Reference: B9301406
Gasket not included
Compatible with Premium generation MSPA Bubble spas
Inflatable MSPA Spa Starter Kit
The essentials for maintaining your inflatable spa
Includes: 1 box of bromine, 1 box of chlorine-free shock, 1 dispenser, and 2 MSPA filters.
Reference: B9301723
Diameter: 37 mm
Shape: Octagonal
Compatible with MSPA inflatable spas from the LITE, Comfort, and Delight ranges
It allows you to check that your spa is properly inflated.
Length: approximately 80cm
One gasket included
MSPA Reference: B0800017
Compatible with Gen 2 Gen 2+ and New2+ spa generations
Heating Block + Pump Replacement Kit for LITE, BERGEN, TEKAPO, OTTOMAN, and STARRY models manufactured in 2022
Includes pump, complete heating block, flow sensors + probes
Blower LITE 2020 for MSPA spa
Compatible with MSPA Bubble Lite 2020 generation spas
MSPA Reference: B9301408
Dimensions: 108 x 57 mm
MSPA Reference: D0101641
Outer diameter of the seal: 44.7mm
Compatible with motor blocks of Lite, Lite 2015, Jb301, and JB304 generations
Manufacturer reference: B9301617
Compatible with MSpa Europe spas only
MSPA Reference: B9301407
Checks for water flow in the heater circuit
Sensor sold individually
Screws not included
MSPA Reference: B9301037
Compatible with Premium spa generation
Includes 1 injector, gasket, and tightening nut
MSPA Reference: B9301427
Features 6 snap fasteners
Compatible with MSPA round inflatable spas with a maximum outer diameter of 180 cm.
Color: grey
Attention, only the cover and the floor mat are included, not the spa itself.
- Compatible with MSPA Lite LS06-GR.
- Sold separately, without tub or control unit.
- Provides insulation and protection for the spa.
- Original clips and mounting system.
Allows securing the installation when a high temperature is detected.
MSPA reference: B0301587
Compatible with all generations of spas except DELIGHT and Tuscany
MSPA references : B9301650/B9301595
Compatible with MSpa MUSE series spas 2021-2024
Compatible models : MSpa Carlton and MSpa Otium
Sold without cable
Inflatable square cover for MSPA inflatable spa
MSPA reference: B0301976 - B0302010
In white PVC for inflatable spas.
Available for 6 people
for Aquaspa, Ospazia, Becool II, Alton family, Hespéride, Lumix, Infinite Spa hot tubs..
To be installed at the outlet of your Blower.
Mspa Reference: B9301393
Replace your damaged/broken strap loop with a new one
Glue not included
Compatible with Alton Family, - Aquaspa - Bcool 2 - Bcool II - Garden Allstore - Hesperide - Ospazia - Sunbay - Water Health Infinite Spa, Lumix brands.
MSPA Reference: B0301368
6 slots for cans and glasses - Central ice bucket
MSPA Reference: B0302949
Connection type: open on both sides
Heater for MSPA inflatable spas
It is equipped with an ozone injector
Do not confuse with reference B9301193 which does not have an ozone injector
Manufacturer reference: B9301719
Dimensions: 150x118mm
Replaces reference B9301523
Reference MSPA: B9301376
Inflatable spa cover MSPA MONO C-MO069
Cover sold separately, neither the motor block nor the basin are included
Compatible with brands: Alton Family, Aquaspa, Bcool 2, Bcool II, Garden Allstore, Hesperide, Sunbay ...
Thermal heater for Becool III spa
Power 1200W
PVC base + connection wires included.
for Aquaspa, Ospazia, Becool II, Alton family, Hespéride, Lumix, Infinite Spa spas.
This tool is designed to remove the nozzles from your inflatable spa.
Annie D.
Conforme à ma commande
Laurent M.
Produit non reçu. Enveloppe vide !!! Et plus de nouvelles
Gérard S.
Super
Benoit F.
pas la bonne piece
Bruno M.
Pièce détachée parfaitement livrée, le technicien a très bien identifié la panne pour me faire commander exactement le bon élément
Benoît B.
Nickel
Kevin D.
Je recommande fortement
Anonymous A.
Livraison rapide. Paquet bien emballé
Karine L.
Parfait
Laurence C.
La bâche est la même que celle livrée avec le spa. Donc très bien adaptée. Par contre il y a un petit trou sur la bâche 😕 malgré le bon conditionnement. Je peux envoyer une photo si nécessaire. C'est vraiment dommage. Je ne sais pas trop comment la réparer