Spare parts for spa pumps (page 4)
298 products
ESPA
16µF Capacitor for WIPER3 Pump PP04410
Allows the starting of a WIPER3 150M 2P4P pump.
Allows the starting of a WIPER3 150M 2P4P pump.
35,00 €
In stock
LX
Fan Cover for WP200 and WP300 LX WHIRLPOOL Massage Pumps
Outer diameter of 18 cm
Outer diameter of 18 cm
29,00 €
In stock
ILCEA 8µ capacitor for spa pump
ILCEA 8µ Capacitor for Circulation Pump
Enables the circulation pump to start
Voltage: 450
ILCEA Reference: K45800
Diameter: 30mm
Height: 60mm
Enables the circulation pump to start
Voltage: 450
ILCEA Reference: K45800
Diameter: 30mm
Height: 60mm
29,00 €
Restocking in progress
BALBOA INSTRUMENTS
Ultimax 1HP Balboa Pump Body
Compatible with Ultimax 1HP BALBOA pumps
Compatible with Ultimax 1HP BALBOA pumps
99,00 €
In stock
AQUA-FLO (GECKO)
Impeller for Circmaster and Flo-master 0.75HP massage pump
Reference AQUA-FLO 3/4HP: 91693551
39,00 €
Restocking in progress
AQUA-FLO (GECKO)
Flange Gasket for Circmaster CMCP/CMHP Pump
Aquaflo Reference: 92200090
Compatible with CMCP and CMHP versions
Aquaflo Reference: 92200090
Compatible with CMCP and CMHP versions
12,00 €
In stock
BALBOA INSTRUMENTS
Turbine (impeller) for Argonaut pump
Reference BALBOA: 4377300, 4377400, 4377500, 4377600
Compatible with Argonaut pumps (0.75, 1, 1.5, and 2HP)
Reference BALBOA: 4377300, 4377400, 4377500, 4377600
Compatible with Argonaut pumps (0.75, 1, 1.5, and 2HP)
90,00 €
In stock
LX
Turbine (impeller) for TDA50 LX WHIRLPOOL massage pump
Turbine diameter: 95 mm 29,00 €
In stock
BALBOA INSTRUMENTS
Turbine (impeller) for HA440NG and Varimax pump
BALBOA Reference: 1212355
Compatible with single-speed and dual-speed pumps
BALBOA Reference: 1212355
Compatible with single-speed and dual-speed pumps
39,00 €
In stock
59,00 €
In stock
AIR SUPPLY
Ultra 9000 Blower Motor 230-240V
Replaces the motor of Ultra 9000 blowers from generations .... .
Allows for replacing only the defective motor instead of the entire blower.
Replaces the motor of Ultra 9000 blowers from generations .... .
Allows for replacing only the defective motor instead of the entire blower.
99,00 €
Restocking in progress
LX
Gasket for WP200 and WP300 LX Whirlpool Massage Pump Flange
For flange reference B436-10
For flange reference B436-10
11,00 €
In stock
In stock
AQUA-FLO (GECKO)
Flo-Master FMVP Aqua-Flo pump body
Compatible with Flo-Master FMVP pumps - 50hz
Compatible with Flo-Master FMVP pumps - 50hz
110,00 €
In stock
HYDROQUIP
AMP to Mini JJ Adapter (Circulation Pump)
Female Amp plug to connect to a pre-wired circulation pump with an Amp plug.
Female Amp plug to connect to a pre-wired circulation pump with an Amp plug.
22,00 €
In stock
HYDRO AIR
Niagara Dual-speed or Single-speed 2HP Pump Body
Compatible with Niagara Dual-speed or Single-speed 2HP pumps
Reference: 1215011
Compatible with Niagara Dual-speed or Single-speed 2HP pumps
Reference: 1215011
114,00 €
In stock
59,00 €
In stock
60,00 €
In stock
BALBOA INSTRUMENTS
Mechanical Seal 16001575 for Balboa HA460 Pump
Compatible with BALBOA HA460 pumps (22-46671 and 22-4617)
Compatible with BALBOA HA460 pumps (22-46671 and 22-4617)
19,00 €
In stock
2,40 €
In stock
AQUA-FLO (GECKO)
XP2e Aqua-Flo Pump Body
Compatible with XP2e 1.5HP, 2HP, and 2.5HP pumps
56 frame: 104 x 148mm
Compatible with XP2e 1.5HP, 2HP, and 2.5HP pumps
56 frame: 104 x 148mm
180,00 €
In stock
WATERWAY
Turbine (impeller) for Viper 4HP Waterway pump
Reference WATERWAY: 310-2200Outer diameter: 97mm
42,00 €
In stock
US SEAL
Mechanical seal kit for a Saltwater Spa Pump.
Compatible with pumps from various manufacturers:
Acura Spa, American Products, Ampro-Diaclear, Astral Pool, Doughboy Industries, Gecko, Jandy, Premier, Purex, Sta-Rite, and Waterway.
Compatible with pumps from various manufacturers:
Acura Spa, American Products, Ampro-Diaclear, Astral Pool, Doughboy Industries, Gecko, Jandy, Premier, Purex, Sta-Rite, and Waterway.
21,00 €
In stock
60,00 €
In stock
GECKO
"Mini JJ" Extension Cable for Single-speed Pump
Allows you to connect a component of your spa to the electronic board
Compatible with units equipped with a "Mini JJ" socket
Allows you to connect a component of your spa to the electronic board
Compatible with units equipped with a "Mini JJ" socket
28,00 €
In stock
WATERWAY
Viper 4HP WATERWAY Pump Body
Compatible with Viper 4HP WATERWAY pumps
Compatible with Viper 4HP WATERWAY pumps
110,00 €
In stock
HYDROQUIP
4-Pin AMP to Mini JJ Purple Adapter
Female Amp connector to connect to a pre-wired circulation pump with an AMP plug.
Female Amp connector to connect to a pre-wired circulation pump with an AMP plug.
25,00 €
In stock
WATERWAY
Executive Euro Pump Body
Compatible with Executive Euro pumps - WATERWAY
56 and 48 Frames - Impeller, gasket, flange seal included
Various power options available - 78mm suction and discharge
132,00 €
In stock
WATERWAY
Seal Kit for WATERWAY Tiny Might Pump
Waterway Reference 811-4000
Made in the USA
Waterway Reference 811-4000
Made in the USA
25,20 €
In stock
LX
Pump Body for TDA200 Spa Pump - LX Whirlpool
Pump Reference: TDA200
Pump Reference: TDA200
60,00 €
In stock
LX
Fan Cover for JA100 LX WHIRLPOOL circulation pump
Outer diameter 11.5 cm
Outer diameter 11.5 cm
29,00 €
In stock
LX
Rear Flange for LP/WP Pump
Compatible with LX Whirlpool LP300 and WP300 pumps
Flange reference: B436-14
Compatible with LX Whirlpool LP300 and WP300 pumps
Flange reference: B436-14
49,00 €
Restocking in progress
WATERWAY
Turbine (impeller) for Executive Euro massage pump
Reference WATERWAY: 2 Generations2HP: 310-4210 / 3HP: 310-4200 / 4HP: 310-4190 / 5HP: 310-4180
42,00 €
Restocking in progress
WATERWAY
Weart Ring for Executive Euro Massage Pump
References WATERWAY: 2HP and 3HP: 319-1380 / 4HP and 5HP: 319-1370
12,00 €
In stock
AQUA-FLO (GECKO)
Circmaster Pump Body
Compatible with Circmaster pumps
2 models: CMCP and CMHP
119,00 €
In stock
AQUA-FLO (GECKO)
Turbine (impeller) for Circmaster and Flo-master 1HP massage pump
Reference AQUA-FLO 3/4HP: 91693601
39,00 €
In stock
WATERWAY
Executive Euro Pump Body
Compatible with Executive Euro pumps - WATERWAY
56 and 48 Frames - Impeller, gasket, flange seal included
Various power options available - 78mm suction and discharge
Compatible with Executive Euro pumps - WATERWAY
56 and 48 Frames - Impeller, gasket, flange seal included
Various power options available - 78mm suction and discharge
126,00 €
In stock
AQUA-FLO (GECKO)
Pump Body for XP2 3HP Sequential Massage Pump
Compatible with XP2 3HP pumps
Compatible with XP2 3HP pumps
216,00 €
In stock
59,00 €
In stock
ASTRAL POOL
NCC Box for 230V single-phase device
This box allows you to start or stop a device using pneumatic action.
240,00 €
In stock
WATERWAY
Turbine (impeller) for Executive Euro massage pump
Reference WATERWAY: 2 Generations2HP: 310-4210 / 3HP: 310-4200 / 4HP: 310-4190 / 5HP: 310-4180
42,00 €
Restocking in progress
LX
Fan Cover for LP150 / LP200 / LP250 / LP300 LX WHIRLPOOL Massage Pump
Outer diameter of 15 cm
Outer diameter of 15 cm
29,00 €
In stock
WATERWAY
Turbine (impeller) for Executive Euro massage pump
Reference WATERWAY: 2 Generations2HP: 310-4210 / 3HP: 310-4200 / 4HP: 310-4190 / 5HP: 310-4180
42,00 €
In stock
SIREM
Rear Flange for Sirem PB Pump
Part that attaches to the pump motor.
Compatible with PB pumps with 16mm diameter seals and impellers.
Part that attaches to the pump motor.
Compatible with PB pumps with 16mm diameter seals and impellers.
89,00 €
Restocking in progress
WATERWAY
Manufacturer reference: CV080PL
Compatible with Waterway pumps - Frame 48 Motor
Diameter: 160 mm
Compatible with Waterway pumps - Frame 48 Motor
Diameter: 160 mm
12,00 €
In stock
WATERWAY
Flo II 1.5HP WATERWAY Pump Body
Compatible with Flo II 1.5HP WATERWAY pumps
Compatible with Flo II 1.5HP WATERWAY pumps
99,00 €
In stock
LAING / XYLEM
Repair Kit (R112) for Laing E10 Pump
Only suitable for E10 pumps
Bearing not included
Only suitable for E10 pumps
Bearing not included
96,00 €
In stock
ESPA
Wiper3 pump flange O-ring
Thickness: 3 mm
Inner diameter: 170 mm
Compatible with all Wiper3 pumps
Thickness: 3 mm
Inner diameter: 170 mm
Compatible with all Wiper3 pumps
9,60 €
In stock
RENE L.
mauvais renseignement
André G.
conforme à mes attentes
Eric B.
produit conforme à mon souhait
KARIM M.
Pas le bon model , trop long de plus de 2 cm c inadmissible. Merci
Domminique V.
Très bien
Domminique V.
J'ai réparé ma pompe de piscine
Domminique V.
Très bien
Stephane M.
Parfait
Franck D.
Pièce livrée en temps et en heure par rapport à la confirmation. Correspondance avec le matériel recherché
Jean-François J.
okok