Spare parts for spa pumps (page 2)
298 products
Allows to control the start/stop of the pneumatic device.
Diameter: 41mm
Bearing for WP/LP200 LX Whirlpool massage pump
Reference: 6204 and 6203
Bearing for WP/LP200 LX Whirlpool massage pump
Reference: 6204 and 6203
LX Reference: B291-12
Bearing for DH1.0 circulation pump and WTC50 LX Whirlpool
Bearing reference: 6202rs
Allows the starting of a massage pump.
This capacitor may be wired or not depending on available stock
Facilitates the starting of a massage pump.
Outer diameter: 99 mm
Inner diameter (front flange side): 48 mm
Manufacturer reference: 25089
Amp adapter cable for connecting 2 pumps to the main control board and the relay board.
Compatible with BALBOA models: GS523DZ
Compatible with pumps from various manufacturers: LX Whirlpool, Spanet, Davey, ...
Compatible with Lx Whirlpool JA50 pumps
Corresponds to part number 11 in the exploded view
5µ spa pump capacitor for circulation pump
For Aqua-Flo Circ Master pump
Allows the pump to start
LX Reference: A29070002
Compatible with LX pumps released after 2018
Thread diameter: 13mm
Gasket not included
Mechanical seal ensuring the sealing between the electric motor and the pump body.
For all single-speed PB massage pumps as well as the PB1C8024L1B dual-speed massage pumps manufactured after July 2018 for Aquamarine spas.
Compatible with Sirem's K, L, and N series pumps.
Outer diameter of the shaft: 12mm
50-60µ Spa Pump Capacitor
Facilitates the start-up of a spa pump
Compatible with most pumps
Turbine (impeller) for Niagara 2HP pump
Reference BALBOA : 1212365
Compatible with single-speed and dual-speed pumps
For flange reference B436-10
Allows the startup of a spa pump
Adaptable to most pumps
Allows you to connect a dual-speed pump in your spa to your IN.XM or IN.XE system.
Enables the starting of a massage pump.
Outer diameter: 106 mm
Inner diameter (front flange side): 58 mm
To be placed on the outlet of your ASD AR-700 blower
Inner diameter: 34mm
Outer diameter: 39mm
Easily screws behind its pump body
Power: 39 W - 100-240 V - 50/60Hz
Length: 90 mm
Thread diameter of the clamping ring: 69 mm
Sold without its pump body
Collects debris to prevent pump damage
Handle included
Significantly reduces the noise of your spa pump.
Compatible with most pumps.
Allows you to connect a component of your spa to the electronic board
Compatible with units equipped with a "Mini JJ" plug
NCC Box for 230V device
This box allows you to start or stop a device through pneumatic action.
BALBOA Reference: 1212235
Compatible with both single-speed and dual-speed Niagara pumps, as well as Vico Ultimax pump.
Also available in: 94mm suction
Compatible with WATERWAY Executive Euro brand pumps
Female Amp plug to connect to a pre-wired dual-speed pump with an Amp plug.
DXD-2A/C Pump Body
Compatible with DXD-2A and DXD-2C pumps.
Compatible with DXD-320 and DXD-330 pumps
Greatly reduces the noise from your spa pump.
Compatible with most pumps.
Manufacturer's reference: 672-1780
Seal for Gecko Drain Plug for Gecko pump series Flo-Master XP2, Flo-Master XP2e, and Flo-Master XP3
RENE L.
mauvais renseignement
André G.
conforme à mes attentes
Eric B.
produit conforme à mon souhait
KARIM M.
Pas le bon model , trop long de plus de 2 cm c inadmissible. Merci
Domminique V.
Très bien
Domminique V.
J'ai réparé ma pompe de piscine
Domminique V.
Très bien
Stephane M.
Parfait
Franck D.
Pièce livrée en temps et en heure par rapport à la confirmation. Correspondance avec le matériel recherché
Jean-François J.
okok