Supplied with 2 fittings for 1.5" pipes (48 mm outer diameter) You can also reuse your old pipe fittings if they are still functional. If your piping is different, check our range of Fittings and Unions to find the fitting that matches your piping.
The pump body is adjustable to fit your piping. You can have the discharge on the left or right according to your installation. To do this, simply unscrew the 4 motor screws to rotate your pump body in the desired direction. Then reposition the screws.
Electrical connection
The pump comes with a connection cable and AMP plug. You can keep your old cable to connect this new pump. If your plug is no longer usable, you can opt for new plugs in our Cables and Plugs for Spa section.
Here are the most commonly used Plugs in the Spa industry:
AMP Plug
J&J Plug ( PIN positions vary depending on the device)
Compatibility
This pump model is retrofit, meaning it can replace any other pump for spas with the same power (HP) and size.
Only for individuals residing in France. French PayPal account required. Payment in 4X is available subject to acceptance, for purchases from 30 € to 2 000 €. A credit is a binding commitment and must be repaid, check your ability to repay. See the 4X Payment Terms and Conditions. Credit offered by PayPal (Europe) S.à r.I. et Cie. S.C.A.. 22-24 Boulevard Royal. L-2449, Luxembourg, R.C.S. Luxembourg B 118 349, which is duly licensed as a Luxembourg credit institution and is under the prudential supervision of the Luxembourg supervisory authority, the Commission de Surveillance du Secteur Financier. This information is provided by PayPal.
