BALBOA INSTRUMENTS (page 3)
374 products
- Balboa CE spa control system, retrofit version
- Incoloy 825 heater - 3.0 kW integrated
- Compatible with up to 3 pumps, blower, circulation pump, and ozonator
- Can replace BP6013G1 and BP6013G3 control boxes
- Balboa reference: G3381
For Duplex systems.
Compatible with Balboa GSxxx or GSxxxZ control boxes.
Balboa reference: 51676
6-button models
Backlit color screen navigation
Compatible with BP series control boxes
BALBOA Reference: 50262
Balboa reference sticker 12513 included
Compatible with Coast Spas and AquaDolce spas
Reference BALBOA: 54562
Electric heater equipped with a 3.0kW resistance that allows for quicker heating of your spa.
Comes with two M7 temperature sensors and a 3-pin AMP plug.
Balboa M7 SMT Temp Sensor
Sticky Sensor
Pipe diameter: 48mm or 50mm
Balboa Reference: 50145
Compatible with GS and GL control systems
Balboa reference: 10-FS715T
32 mm air inlet x 50 mm water inlet - No self-draining
Flow rate: 1.5 m3/h @ 7 mH2O
Embedded hole diameter: 66.70 mm (2 5/8")
Sold without its jet
Balboa Reference: 1025009
Power: 2 HP (1.5 kW) – 220-240V 50Hz
Cable and fittings not included
Complete Spa Projector Diameter 6.5 cm
Cable plug Amp + 12V bulb included
Connection: AC12V - 2 wires
Front diameter: 65mm
For Duplex systems.
Compatible with Balboa control boxes from the GSxxx or GSxxxZ series.
Balboa reference: 54094 (Blower, Jets, Temp, Light).
Front diameter (ABS): 92mm
Socket connection diameter: 54mm
Ideal for concrete spas
Y Cable for WIFI module
Compatible with BALBOA WIFI module
Turbine (impeller) for Niagara 2HP pump
Reference BALBOA : 1212365
Compatible with single-speed and dual-speed pumps
Balboa Reference: 10-FS00TAHA WHT
Power of 3Kw
BALBOA Reference: 58133
- Complete pack: BP8 control box + SpaTouch 4 touchscreen with integrated WiFi
- Built-in 3 kW heater – 2" fittings included
- Connection cables included for pumps and lighting
Compatible with GS series control boxes
BALBOA reference keypad without sticker: 52424
BALBOA reference keypad with sticker (Blower, Jets, Temp, Light): 54094
BALBOA sticker only (Blower, Jets, Temp, Light): 10669
For Duplex systems.
Compatible with Balboa control boxes from the GSxxxSZ series
Balboa Reference: 54112 (no sticker).
Collects debris to prevent pump damage
Handle included
BALBOA Reference: 1212235
Compatible with both single-speed and dual-speed Niagara pumps, as well as Vico Ultimax pump.
NCC Box for 230V device
This box allows you to start or stop a device through pneumatic action.
Replaces the discontinued 5-50-2D box
Commonly found in Dynasty Spas® and Balboa Spring Lights lighting system
Balboa Reference: 20-5920
J&J Electronics Reference: JCT BOX WC-25
Third generation of 100% color SpaTouch tactile keyboard
Compatible only with CZM8 heat pump
5-inch screen
Compatible with GS and GL series control systems
Equipped with a 10A fuse
BALBOA reference: 53811
Compatible with Blower genesis 500, 700, 900, and 1200 Watts
Allows you to connect your lighting to the electronic board
Adaptable to boxes equipped with a 2-pin "Amp" socket
Cable length: 1.60 meters
Compatible with Balboa GSxxx or GSxxxZ series control boxes.
Balboa reference: 55350 (keyboard with sticker).
Complete electronic system TP700 + BP2100 + Wifi
Includes Control Box + Keypad + Heater + Lighting
Allows for the complete replacement of an old control system.
Includes Wifi for remote control of your spa
Allows you to connect 3 single-speed massage pumps + 1 blower to your BALBOA BP2100 system
Compatible with BALBOA models: BP2100G1
9-button Model
Manufacturer reference: 17381
Dimensions: 243 x 73 mm
Reference BALBOA: 11521
4-button model
Compatible with BP2100, BP6013, and BP601 series.
Balboa Reference: 59081
Compatible with Balboa GL and BP series control boxes.
Balboa Reference: 52683 (Jets 1)
Allows control of 2 pumps
Dimensions: 168 x 68 mm
3M adhesive
Balboa reference: 57542
Compatible with all Balboa BP series control systems
Compatible with GL8000 control systems.
Compatible with GL series control boxes: GL2000 / GL2001 / GL8000
BALBOA reference: 53291
Bernard B.
Toujours pas reçu mon colis
Alain R.
Sitôt reçue et installée tout fonctionne
Sabine D.
Ce panneau de commande tactile est réellement interchangeable avec l'ancien, tout fonctionne juste en le branchant à la place. Par contre il faut faire une plaque d'adaptation car le trou nécessaire n'a pas les mêmes dimensions.
Anonymous A.
Le cordon de raccordement un peu juste
Ludovic B.
Produit conforme à l’original
Ludovic B.
Produit conforme à l’original
Olivier M.
Réchauffeur identique à celui d'origine. Très satisfait.
Patricia B.
Balboa toujours de la qualité
Olivier P.
Produit conforme , mais je dois faire une petite modification au niveau des tuyaux .
Olivier M.
Produit parfait , seule soucie avec le code CMS , fournie par Boospa , que j’ai due copier coller , non taper manuscrit . Sinon cela fonctionne parfaitement.