BALBOA INSTRUMENTS (page 2)
374 products
Compatible with GS series control boxes
Reference BALBOA: 53646
Front panel sticker included.
Allows you to connect a part of your spa to the electronic board
Adaptable to boxes equipped with an "Amp" socket
Embedded hole diameter: 37-45mm
Front diameter: 48mm
External water inlet diameter: 3/4” (19mm)
External air inlet diameter: 3/8” (9.5mm)
Rings (for tightening and compensation) + gasket included
Front diameter: 86 mm
1 ribbed gasket included
Copper Strip 30039 for BALBOA Heater
Compatible with BALBOA systems after 2008
Connector type: AMP male
Number of pins: 4
Pins not included
Complete electronic system VL200 + GS100
Includes Control Box + Keypad + Heater + Lighting
Allows for the complete replacement of an old control system.
Compatible with certain Balboa systems including GS510SZ and GS510DZ.
Includes a 30A fuse
Front diameter: 67mm
Inner diameter: 1" or 33mm
Balboa Reference: 1025002
Durajet pumps are known for their durability and long lifespan
Power: 2 HP (1.5 kW) – 220-240V 50Hz
Cable and fittings not included
Compatible with Balboa GS523DZ control systems
Balboa circuit board reference: 55857-01 or 55138
Compatible with heaters 58118 and 58107
Adaptable to GS control boxes
Compatible with Balboa GS series control boxes
Reference BALBOA: 54539
Power of 2KW or 3kW
BALBOA Reference: 54806-HEATER or 54807-HEATER
Set of 3 spare parts
White ABS front panel
Length: 2 meters
Length: 13 cm
Balboa BP2100 Electronic Board
Compatible with Balboa BP2100G1 control systems
Balboa electronic board reference: 56392-02
Compatible with heaters 58118 and 58107
Compatible with Balboa systems GS520DZ, GS520SZ, GS523DZ, BP6013G2, BP6013G3, and BP2100
Electric heater equipped with a 2.0kW resistance that allows your spa to heat up more quickly.
Comes with two M7 temperature sensors and a 3-pin AMP plug.
Complete electronic system VL260 + GS501Z
Includes Control Box + Keypad + Heater + Lighting
Allows for the complete replacement of an old control system.
Compatible with BP series control boxes.
Manufacturer's reference: 55676
Balboa Reference: 57237
Socket not included
Diameter: 100mm
1 fixing screw
Balboa GL2001 Mach3 Electronic Board.
Compatible with Balboa GL2001 control systems.
Balboa electronic board reference: 53975-04
Compatible with heaters 58118 and 58107
Control the air intake of a venturi circuit
Reference BALBOA: 10-2310
Compatible with 1 inch piping (33mm - outer diameter)
Manufacturer reference: Hydroair 1023063
Power: 1.5 HP (1.3 kW) – 220–240 V, 50 Hz
Supplied with: union fittings for pump-to-pipe connection (50 mm, 60 mm, 63 mm) + AMP plug connection cable
This model replaces the ITT Hydroair Magnaflow 440 pump, as its production has been suspended
For Duplex systems.
Compatible with Balboa GS series control boxes.
BALBOA reference: 53646 (no sticker - gray edges).
Compatible with control boxes from GL8000 / VAL / LE / M7 series.
Manufacturer part number: 50259
Compatible with BP series control boxes
With TP400W sticker - ref: 12510
Compatible with BALBOA therapeutic sequencers
BALBOA reference: 11054
Used on Wellis®, Aquamarine®, Portcril®, and Iberspa® spas
For Duplex systems.
Compatible with Balboa GSxxx or GSxxxZ series control boxes.
Balboa Reference: 55129 (Light/Temp/Jets/Aux).
Connects to a compatible BALBOA system
2-pin connector, various lighting cycles (steady, fast, fading...), quick and easy installation.
Integrated LED controller
- Universal spa control system: BP8 control box + TP700 touch panel
- Integrated 3 kW Incoloy heater, supports multiple pumps, blower, ozonator, and lighting
- WiFi compatibility (Module not included)
Visible face diameter: 68mm
Stainless steel imitation coating
Manufacturer reference: 25089
Amp adapter cable for connecting 2 pumps to the main control board and the relay board.
Compatible with BALBOA models: GS523DZ
It allows you to do without copper strips to connect the heater to the board's terminal block
Plug Amp + 12V bulb included
Heater 58373 2.7 kW "Low Flow"
Titanium resistance
Power: 2.7kW
Sundance® Reference: 6500-401
Bernard B.
Toujours pas reçu mon colis
Alain R.
Sitôt reçue et installée tout fonctionne
Sabine D.
Ce panneau de commande tactile est réellement interchangeable avec l'ancien, tout fonctionne juste en le branchant à la place. Par contre il faut faire une plaque d'adaptation car le trou nécessaire n'a pas les mêmes dimensions.
Anonymous A.
Le cordon de raccordement un peu juste
Ludovic B.
Produit conforme à l’original
Ludovic B.
Produit conforme à l’original
Olivier M.
Réchauffeur identique à celui d'origine. Très satisfait.
Patricia B.
Balboa toujours de la qualité
Olivier P.
Produit conforme , mais je dois faire une petite modification au niveau des tuyaux .
Olivier M.
Produit parfait , seule soucie avec le code CMS , fournie par Boospa , que j’ai due copier coller , non taper manuscrit . Sinon cela fonctionne parfaitement.