MSPA (page 2)
142 products
Length: approximately 80cm
One gasket included
MSPA Reference: B0800017
Compatible with Gen 2 Gen 2+ and New2+ spa generations
Heating Block + Pump Replacement Kit for LITE, BERGEN, TEKAPO, OTTOMAN, and STARRY models manufactured in 2022
Includes pump, complete heating block, flow sensors + probes
Blower LITE 2020 for MSPA spa
Compatible with MSPA Bubble Lite 2020 generation spas
MSPA Reference: B9301408
Dimensions: 108 x 57 mm
MSPA Reference: D0101641
Outer diameter of the seal: 44.7mm
Compatible with motor blocks of Lite, Lite 2015, Jb301, and JB304 generations
Compatible with CONCEPT 2020 and FRAME 2021 / 2022 spas
MSPA Reference: B9301407
Checks for water flow in the heater circuit
Sensor sold individually
Screws not included
Manufacturer reference: B9301617
Compatible with MSpa Europe spas only
MSPA Reference: B9301037
Compatible with Premium spa generation
Includes 1 injector, gasket, and tightening nut
MSPA Reference: B9301427
Features 6 snap fasteners
Compatible with MSPA round inflatable spas with a maximum outer diameter of 180 cm.
Color: grey
Attention, only the cover and the floor mat are included, not the spa itself.
- Compatible with MSPA Lite LS06-GR.
- Sold separately, without tub or control unit.
- Provides insulation and protection for the spa.
- Original clips and mounting system.
MSPA reference: B0301587
Compatible with all generations of spas except DELIGHT and Tuscany
MSPA references : B9301650/B9301595
Compatible with MSpa MUSE series spas 2021-2024
Compatible models : MSpa Carlton and MSpa Otium
Sold without cable
Inflatable square cover for MSPA inflatable spa
MSPA reference: B0301976 - B0302010
In white PVC for inflatable spas.
Available for 6 people
Mspa Reference: B9301393
Replace your damaged/broken strap loop with a new one
Glue not included
MSPA Reference: B0301368
6 slots for cans and glasses - Central ice bucket
Heater for MSPA inflatable spas
It is equipped with an ozone injector
Do not confuse with reference B9301193 which does not have an ozone injector
Manufacturer reference: B9301719
Dimensions: 150x118mm
Replaces reference B9301523
Reference MSPA: B9301376
Inflatable spa cover MSPA MONO C-MO069
Cover sold separately, neither the motor block nor the basin are included
Inflatable spa cover for 4-person square MSPA Gray LS04
Dimensions: 170 x 170 cm
Sold WITHOUT the tub shown in the photos
MSPA Reference: B9301314
Outer Diameter: 58 mm
Inner Diameter: 39.50 mm
Screw valve for MSPA MONO Concept 2020 inflatable spas
MSPA Reference: B9301395
Thread diameter: 39mm
Thread length: 25mm
Reference MSPA: B9301499
Cover for 4-person MSPA inflatable spa
Dimensions: 158 x 158 cm
Color: gray
8 straps and clips included
Tub NOT included
Compatible with MSPA brand spas
Mirror effect ABS
Manufacturer reference: C-ST061/062
Dimensions (inflated): 218 cm x 218 cm x 70 cm
Capacity: 6 people
LED lighting not included – compatible for installation
Tub sold separately – motor unit not included
MSPA References: B9300107 - B0301465
Enhances the protection of your inflatable hot tub
2 models available: 4 or 6 persons
MSPA References: B9300107 - B0301465
Enhances the protection of your inflatable spa
2 models available: 4 or 6 persons
Cover compatible with MSPA LITE LS04-NA spa
Color: Navy Blue
Attention, basin not included
Compatible with MSPA Bubble Premium generation spas
MSPA heater compatible only with Mspa Concept and Frame inflatable spas
Equipped with a flow detector
MSPA reference: B9301311
Compatible with Jombo hand pumps
Nozzles + gasket included.
MSPA Reference: B9301762
Compatibility: Oslo Mspa model
Length: 285mm
Width: 136mm
Distance between fixing points: 135mm
Fixing type: Suction cups
Color: Gray
Compatibility: Oslo Mspa model
Length: 320mm
Width: 195mm
Distance between fixing points: 86.5mm
Fixing type: notch
Color: Gray
Compatible with the Premium spa generation
These three tools will help you remove jet covers, jets, and return/suction nozzles
- Compatible with 6-person round models.
- Sold separately, without tub or control unit.
- Enhanced insulation to reduce heat loss.
- Original clips for easy fastening.
MSpa Reference: M-OT061-M-OT062
Color: Grey and White
Dimensions: 185 x 185 cm
Capacity: Up to 6 people
Tub only – motor unit not included
Compatible with Tuscany spas by MSPA brand
Compatible with Gen 2+ / New 2+ spa generation
Used for inflating the pool.
ABS handle to clip on.
To be installed inside the motor block.
For MSPA spas of Gen2/Gen2+/New2+ generations
Length: 1.5 meters
Manufacturer reference: B9300639
Color: Dark grey
Shape: Square
Dimensions: 115 x 145 x 42 mm
Annie D.
Conforme à ma commande
Laurent M.
Produit non reçu. Enveloppe vide !!! Et plus de nouvelles
Gérard S.
Super
Benoit F.
pas la bonne piece
Bruno M.
Pièce détachée parfaitement livrée, le technicien a très bien identifié la panne pour me faire commander exactement le bon élément
Benoît B.
Nickel
Kevin D.
Je recommande fortement
Laurence C.
La bâche est la même que celle livrée avec le spa. Donc très bien adaptée. Par contre il y a un petit trou sur la bâche 😕 malgré le bon conditionnement. Je peux envoyer une photo si nécessaire. C'est vraiment dommage. Je ne sais pas trop comment la réparer
Anonymous A.
Très bien
Nicolas L.
Pas possible dc3valier rien recu