Manufacturer & Expert
7,000+ References
Fast Shipping
Technical assistance
All Major Brands
Inflatable spas parts (page 2)
123 products
Blower (air blower) for Aquaspa, Ospazia, Bcool-II, Alton Family, Heperide, Sunbay, Lumix, Infinite Spa...
To be installed inside the motor block.
Repair Kit for MSPA Inflatable Spas
Available in 2 colors: Black or Transparent
Sold in a set of 2 connectors measuring 15cm X 10cm each
Glue included
Compatible with 2020 Lite generation MSPA spas
MSPA Reference: B9301406
Gasket not included
Heating Block + Pump Replacement Kit for LITE, BERGEN, TEKAPO, OTTOMAN, and STARRY models manufactured in 2022
Includes pump, complete heating block, flow sensors + probes
It allows you to check that your spa is properly inflated.
MSPA Reference: B0800017
Compatible with Gen 2 Gen 2+ and New2+ spa generations
Blower LITE 2020 for MSPA spa
Compatible with MSPA Bubble Lite 2020 generation spas
MSPA Reference: B9301408
Manufacturer reference: B9301617
Compatible with MSpa Europe spas only
Dimensions: 108 x 57 mm
MSPA Reference: D0101641
Outer diameter of the seal: 44.7mm
Compatible with motor blocks of Lite, Lite 2015, Jb301, and JB304 generations
MSPA Reference: B9301037
Compatible with Premium spa generation
Includes 1 injector, gasket, and tightening nut
- Compatible with MSPA Lite LS06-GR.
- Sold separately, without tub or control unit.
- Provides insulation and protection for the spa.
- Original clips and mounting system.
- Filter diameter : 107 mm
- Filter height : 76 mm
- Top : open, inner diameter 45 mm
- Bottom : open, inner diameter 45 mm
MSPA references : B9301650/B9301595
Compatible with MSpa MUSE series spas 2021-2024
Compatible models : MSpa Carlton and MSpa Otium
Sold without cable
Allows securing the installation when a high temperature is detected.
Manufacturer reference: B9301719
Dimensions: 150x118mm
Replaces reference B9301523
for Aquaspa, Ospazia, Becool II, Alton family, Hespéride, Lumix, Infinite Spa hot tubs..
To be installed at the outlet of your Blower.
MSPA Reference: B0302949
Connection type: open on both sides
Heater for MSPA inflatable spas
It is equipped with an ozone injector
Do not confuse with reference B9301193 which does not have an ozone injector
Thermal heater for Becool III spa
Power 1200W
PVC base + connection wires included.
for Aquaspa, Ospazia, Becool II, Alton family, Hespéride, Lumix, Infinite Spa spas.
This tool is designed to remove the nozzles from your inflatable spa.
Compatible with brands: Alton Family, Aquaspa, Bcool 2, Bcool II, Garden Allstore, Hesperide, Sunbay ...
Reference MSPA: B9301499
Cover for 4-person MSPA inflatable spa
Dimensions: 158 x 158 cm
Color: gray
8 straps and clips included
Tub NOT included
Screw valve for MSPA MONO Concept 2020 inflatable spas
MSPA Reference: B9301395
Thread diameter: 39mm
Thread length: 25mm
Compatible with MSPA brand spas
Mirror effect ABS
MSPA Reference: B9301762
MSPA heater compatible only with Mspa Concept and Frame inflatable spas
Equipped with a flow detector
Compatible with MSPA Bubble Premium generation spas
Compatibility: Oslo Mspa model
Length: 320mm
Width: 195mm
Distance between fixing points: 86.5mm
Fixing type: notch
Color: Gray
MSPA reference: B9301311
Compatible with Jombo hand pumps
Nozzles + gasket included.
Simple and quick assembly
Compatible with many brands of inflatable spas
Compatibility: Oslo Mspa model
Length: 285mm
Width: 136mm
Distance between fixing points: 135mm
Fixing type: Suction cups
Color: Gray
- Compatible with 6-person round models.
- Sold separately, without tub or control unit.
- Enhanced insulation to reduce heat loss.
- Original clips for easy fastening.
Compatible with the Premium spa generation
These three tools will help you remove jet covers, jets, and return/suction nozzles
Compatible with Tuscany spas by MSPA brand
Used for inflating the pool.
ABS handle to clip on.
Compatible with Gen 2+ / New 2+ spa generation
MSPA Reference: B9301483
Compatible with square Spas measuring 145cm in length
Except for MSPA inflatable Spas
- Compatible with round 6-person models.
- Sold separately, without cover or control unit.
- Easy installation using original fittings.
- Durable and reliable replacement liner.
To be installed inside the motor block.
For MSPA spas of Gen2/Gen2+/New2+ generations
Length: 1.5 meters
Dimensions: 115 x 145 x 42 mm
To be installed inside the motor block.
For Mspa spas of all generations
Compatible with MSPA Tuscany brand spas
Total length: 36cm
Stéphane J.
Simple à installer
M J.
Parfait
Helmstetter R.
Correspond très bien à mon spa, produite solide et conforme à mes attentes
Rachid B.
Pièce qui semblé avoir été stocké dans un lieu humide. Des traces vert d humidité sur la piece. Déçu par cette commande.
Karelle P.
Très bien
Karelle P.
Très bien
Yannick D.
Je trouve le prix élevé.
Randolf S.
Merci
Gervais P.
Bien et pas chère
Éric L.
Fonctionne correctement