Manufacturer & Expert
7,000+ References
Fast Shipping
Technical assistance
All Major Brands
Heating (page 2)
240 products
From the HRS series
Power 3KW
Pipe diameter 48mm
Copper Strip 30039 for BALBOA Heater
Compatible with BALBOA systems after 2008
Large Heater H30-R1
Power 3KW
Pipe diameter 2"
HydroQuip Reference: 26-C3182-1S
Replaces Watkins Hot Spring heaters 73792
Temperature and Hi-Limit sensors included
Connects to a 3/4 inch hose (outer diameter)
1.5kW - 240 V - 6.25 A - 50/60 Hz - single phase
Wall fitting included
Compatible only with GD7005 A-TECH systems
Standalone, operates without an electronic board
Replaces the Elecro Evolution Plug'n Play 3kW spa heater
In ABS
Reference: Q915445-10 or 31090974
Compatible with DAVEY SpaPower systems: SP601, SP800, and SP1200.
Power of 2KW or 3kW
BALBOA Reference: 54806-HEATER or 54807-HEATER
Compatible with KL8600 and KL8800 control systems
Connects to the electronic board
1.5-inch union fitting for spa heater
+ 1 grooved gasket included
Electric heater equipped with a 2.0kW resistance that allows your spa to heat up more quickly.
Comes with two M7 temperature sensors and a 3-pin AMP plug.
Pressure range: between 1 and 5 PSI
25A
Hydroquip Reference: 26-315-U-K
Power: 2.7kW
Heating Element Type: Titanium
Compatible with all Sundance and Jacuzzi spas manufactured between 2007 and 2020
Replaces models 6500-315; 6500-844; 58335; 26-3403-1-BT-K
Power: 2.1kW + 3.4kW
Ref. Boospa: A-000000-08811
Ref. Dimension One: 01781-27
Ref. Hydroquip: 26-C3548-1-7T-F
Large Heater H30-R1
Power 3KW
Pipe Diameter 2"
Compatible with control boxes from GL8000 / VAL / LE / M7 series.
Astrel Reference: PFEAT3010000
This heater replaces the following references:
PFEAR2010000 - PFEAR2210000 - PFEAR2200000- PFEAR2000000
Power: 3000W - 240V - 50Hz - single-phase
Equipped with a double sensor for water level and temperature + flow detector
Titanium resistance
Gecko Reference 9920-400446
2-pin connector to be connected to the electronic board
From the HRS series
Power 3KW
Pipe diameter 48mm
Connects to a compatible BALBOA system
Compatible with DAVEY SP600, SP601, SP800 housings.
Old references: Q80062T / Q80062T-2
New reference: 15146-20SP
Heater 58373 2.7 kW "Low Flow"
Titanium resistance
Power: 2.7kW
Sundance® Reference: 6500-401
Electric heater equipped with a 3.0kW resistance that allows for quicker heating of your spa.
Comes with two M7 temperature sensors and a 3-pin AMP plug.
It allows you to do without copper strips to connect the heater to the board's terminal block
Power: 4kW - Equipped with a pressure switch
For Caldera brand spas
Thermal heater for Becool III spa
Power 1200W
PVC base + connection wires included.
Connects to the electronic board of the ASTREL control system.
Reference 6600-144
Part of the heat.wave range and therefore compatible with the in.yj control system only.
Balboa Reference: 50145
Compatible with GS and GL control systems
Balboa M7 SMT Temp Sensor
Sticky Sensor
Heater 15146-20SP - 2.0kW or 15146-30SP - 3.0 kW 230V
Compatible with DAVEY's SP600; SP601; SP800 enclosures.
2 Models available for selection
Previous reference for 2 kW model: Q80062T
Previous reference for 3 kW model: Q80067T
Connects to heaters SFUL HW02B, HW02C, and HW02D.
Pipe diameter: 48mm or 50mm
Claude B.
Parfait cela correspondait parfaitement à mon besoin.
Josef P.
Sehr Gut, passt genau . DANKE
Patrick L.
Produit conforme à l'original qui datait de 17 ans le prix est conséquent espérons qu'il fonctionne aussi longtemps que celui d'origine
Jean-Francois G.
Ce réchauffeur est équipé de 2 cables qui font 1 mètre de long, ils sont trop courts.
Louis G.
Conforme
Teodor Z.
Perfect
Rachid B.
Pièce qui semblé avoir été stocké dans un lieu humide. Des traces vert d humidité sur la piece. Déçu par cette commande.
Jonathan K.
Reçu rapidement, j'ai pu réparer mon SPA moi-même avec les conseils du service technique. Merci au support Boospa. je recommande
J C.
Matériel avec prix raisonnable, mais pas une grande longévité. Dommage
Denis F.
Bien, je suis content(e).