Manufacturer & Expert
7,000+ References
Fast Shipping
Technical assistance
All Major Brands
Heating (page 4)
240 products
Only compatible with older PEIPS control systems.
Astrel Reference: PFEAT2010000
2.0kW - single-phase - 240V-50Hz
This heater replaces models: PFEAR3010000 and PFEAR3200000
Features a dual sensor (hi-limit and temperature) + flow detector
Equipped with a Titanium heating element
For pipes with an outer diameter of 60mm (2")
Compatible with SG Oceane and Ethink probes.
Length: approximately 1.5 meters
Pressure range: between 1 and 5 PSI
Replaces 3029 and 4010 pressure switches
25A
Manufacturer reference: 73001
Ideal for pools with a volume of 5-15 m3
Power: 4 kW.
Noise Level: 45 dBA
Compatible with Balboa BP series systems ending in "C8Z"
Compact model - 2" fittings included
Reference: TBS132A
Engages when pressure is maintained
Manufacturer reference: 25263
Power: 7.2 kW
Heating element type: titanium
Max Amps: 30
Volts: 240
Single phase - 50/60Hz
Reference 6600-168
Pipe diameter: 48 mm or 50mm
Pressure range: between 1 and 5 PSI
25A
VitaSpa C2300-0010ET Spa Heater
Power: 3Kw
For VitaSpa brand spas
Compatible with many control systems.
The S-SPA and M-SPA systems from Gecko use this heater.
Reference: TBS125
Allows to start/stop two devices simultaneously.
HydroQuip Reference: 26-0011-3S-K
Power: 2500 W
Current: 10.4 A
Voltage: 240 V
Single-phase - 50/60Hz
Dimensions: 29mm X 21mm X 13mm
Compatible with BALBOA EL and GL systems
Reference: 39530 or 39205
Compatible with Hotspring® spas manufactured after 2002
GECKO IN.THERM Heater 2kW / 3.8kW / 4kW
Compatible with GECKO control boxes IN.XE and IN.XM series.
4kW model replaced by the 3.8kW model
Power: 2.1kW / 3.4kW / 5.5kW Depending on installation
Calspas® references: ELE09903071 or V4001P-DX
Heater DH30-R2
Power 3KW
Pipe diameter 1 1/2"
Balboa Reference: 58375
4kW - 240V - 16.7A
For 3/4" hose (outer diameter 27 mm)
Gecko Reference 9920-400684
Reference: III-PLS-sensor
Compatible only with PEIPS® III-PLS systems
Gecko 3kW Universal Heater C2300-5000
Compatible with many control systems.
Available in Incoloy or Titanium version.
Reference: 38416
Compatible with Hotspring® spas manufactured between 1995 and 2002, Caldera® spas, and Tiger River spas
HW02C Heater with built-in digital thermostat
Power: 3.0kW 240V
Also supplies power to the circulation pump.
Manufacturer reference: 73001
Dimensions: 794 x 474 x 555mm
- Best Seller
Dimension One C3552-1 Spa Heater
Power: 2.1kW / 3.4kW / 5.5kW Depending on installation
For Dimension One brand spas
Jacuzzi/Sundance Spa Heater C3226-1A
Power: 4kW
For Jacuzzi or Sundance brand spas
Power: 2Kw
For spas using an S-Class control system (SSPA)
This part is positioned between the heater body and the electronic plate.
Manufacturer reference: 72492
Dimensions: 185 x 6.5cm
Reference: 38415
Compatible with Hotspring® spas manufactured between 1995 and 2002, Caldera® spas, and Tiger River spas
Heater SP1200 3.5kW / 4.5 kW / 6.0kW 240V
Compatible with SP1200 DAVEY Control Boxes.
3 Models (3.5kW, 4.5 kW, and 6.0kW)
- Poolex Spawer O'Spa 5 kW: heats & cools
- Up to 75% savings compared to a heater
- Built-in Wi-Fi, remote control
- Quiet: < 53 dB at 1 m
- Plug & Play installation, 32/38 mm
Manufacturer reference: GD7005-sensorA
Heater SP1200 3.5kW / 4.5kW / 6.0kW 240V
Compatible with SP1200 DAVEY Control Boxes.
3 Models (3.5kW, 4.5kW, and 6.0kW)
Heater for Caldera Spa 26-3330-5S-K
Power: 4Kw
For Caldera brand spas
Hydroquip Heating Kit 26-3478-1A-BT-P for spa
2.7 kW - 240V - 11.3 Amps For 3/4" (27mm) outer diameter pipes
High limit sensor + pressure switch included
Power: 3.6Kw
For ArticSpa brand spas
2 union fittings for 2" hoses (outer diameter 60mm) included
3" to 1" Heater Connector
Placed at the outlet of a heater to connect a 1" hose
Hydroquip Reference: 42-2386-K
Claude B.
Parfait cela correspondait parfaitement à mon besoin.
Josef P.
Sehr Gut, passt genau . DANKE
Patrick L.
Produit conforme à l'original qui datait de 17 ans le prix est conséquent espérons qu'il fonctionne aussi longtemps que celui d'origine
Jean-Francois G.
Ce réchauffeur est équipé de 2 cables qui font 1 mètre de long, ils sont trop courts.
Louis G.
Conforme
Teodor Z.
Perfect
Rachid B.
Pièce qui semblé avoir été stocké dans un lieu humide. Des traces vert d humidité sur la piece. Déçu par cette commande.
Jonathan K.
Reçu rapidement, j'ai pu réparer mon SPA moi-même avec les conseils du service technique. Merci au support Boospa. je recommande
J C.
Matériel avec prix raisonnable, mais pas une grande longévité. Dommage
Denis F.
Bien, je suis content(e).