CT100 Electric Heater with Built-in Thermostat
This heater is part of the CT100 series.
Balboa Reference: 54151V Model 1.5kW for 6.3A
Dimensions of the 1.5kW model: - Length: 18.50cm
- Height: 13cm
Balboa Reference: 54301V Model 3.0kW for 12.5A
Dimensions of the 3.0kW model: - Length: 25.50cm
- Height: 13cm
Minimum operating flow rate: 150 l/min or 9m3/h The heater features a negative pressure switch (it must
absolutely be positioned on the suction side of the circuit, between the suction drain/skimmer and your pump.
Pipe diameter: 48mm or 50mm
Heater with integrated temperature control, no additional control system required
Specifications:- Heating power 1.5kW / 3kW Supply 240V - 50/60Hz - 6.3A / 12.5A
- 1 reinforced U-shaped immersion heater
- Adjustable thermostat from 0°C to 50°C
- Low flow protection from 0.8psi
- IPX5 standard
- Minimum water flow: 9m³/h