Inflatable spas (page 3)
- Best Seller
- Best Seller
- Best Seller
- Best Seller
- Best Seller
- Best Seller
- New
251 products
Outer Diameter: 107 mm
Height: 95 mm
Top: 55mm opening
Bottom: 55mm opening
MSPA Reference: B9301037
Compatible with Premium spa generation
Includes 1 injector, gasket, and tightening nut
MSPA Reference: B9301427
Features 6 snap fasteners
Compatible with MSPA round inflatable spas with a maximum outer diameter of 180 cm.
Color: grey
Attention, only the cover and the floor mat are included, not the spa itself.
Heating Block + Pump Replacement Kit for LITE, BERGEN, TEKAPO, OTTOMAN, and STARRY models manufactured in 2022
Includes pump, complete heating block, flow sensors + probes
MSPA Reference: B9301407
Checks for water flow in the heater circuit
Sensor sold individually
Screws not included
Reference: B9301723
Diameter: 37 mm
Shape: Octagonal
Compatible with MSPA inflatable spas from the LITE, Comfort, and Delight ranges
Allows securing the installation when a high temperature is detected.
MSPA reference: B0301587
Compatible with all generations of spas except DELIGHT and Tuscany
Outer Diameter: 110mm
Length: 200mm
Top: Opening of 52mm
Bottom: Opening of 52mm
Filtration Area: 5m2
MSPA Reference: B0301976 - B0302010
In white PVC for inflatable spas.
2 models available: 4 seats (120cm x 120cm) and 6 seats (150cm x 150cm).
for Aquaspa, Ospazia, Becool II, Alton family, Hespéride, Lumix, Infinite Spa hot tubs..
To be installed at the outlet of your Blower.
Compatible with Alton Family, - Aquaspa - Bcool 2 - Bcool II - Garden Allstore - Hesperide - Ospazia - Sunbay - Water Health Infinite Spa, Lumix brands.
MSPA Reference: B0301368
6 slots for cans and glasses - Central ice bucket
Mspa Reference: B9301393
Replace your damaged/broken strap loop with a new one
Glue not included
Heater for MSPA inflatable spas
It is equipped with an ozone injector
Do not confuse with reference B9301193 which does not have an ozone injector
Compatible with brands: Alton Family, Aquaspa, Bcool 2, Bcool II, Garden Allstore, Hesperide, Sunbay ...
16A - 220-250V - 10mA - IP55
Compatible with brands such as Hesperide, Ospazia, Spark, Aquaspa, Sunbay, BecoolII, Waterhealth, BeSpa, Bubblespa, Lumix, Infinite Spa, and many more
Thermal heater for Becool III spa
Power 1200W
PVC base + connection wires included.
Weight pocket included
Made of PVC
Weight not included
for Aquaspa, Ospazia, Becool II, Alton family, Hespéride, Lumix, Infinite Spa spas.
This tool is designed to remove the nozzles from your inflatable spa.
MSPA Reference: B9301314
Outer Diameter: 58 mm
Inner Diameter: 39.50 mm
Height: 43 mm
Outer diameter: 104 mm
Inner diameter: 50 mm
- Compatible with MSPA Lite LS06-GR.
- Sold separately, without tub or control unit.
- Provides insulation and protection for the spa.
- Original clips and mounting system.
MSPA references : B9301650/B9301595
Compatible with MSpa MUSE series spas 2021-2024
Compatible models : MSpa Carlton and MSpa Otium
Sold without cable
Inflatable spa cover for 4-person square MSPA Gray LS04
Dimensions: 170 x 170 cm
Sold WITHOUT the tub shown in the photos
Manufacturer reference: C-ST061/062
Dimensions (inflated): 218 cm x 218 cm x 70 cm
Capacity: 6 people
LED lighting not included – compatible for installation
Tub sold separately – motor unit not included
MSPA Reference: B0302949
Connection type: open on both sides
Reference MSPA: B9301499
Cover for 4-person MSPA inflatable spa
Dimensions: 158 x 158 cm
Color: gray
8 straps and clips included
Tub NOT included
Underwater Light Show / Fountain
Create a colorful fountain in the middle of your spa with the Underwater Light Show - Fountain.
MSPA Reference: B9301395
Thread Diameter: 39mm
Thread Length: 25mm
Manufacturer reference: B9301617
Compatible with MSpa Europe spas only
- Ultra-fine filtration down to 3 microns
- 700 g replaces 25 kg of sand or paper cartridges
- Compatible with pools and spas
- Reusable and washable by hand or in a machine, no detergent needed
- Lifespan of 1 year– a cost-effective and practical solution
Compatible with MSPA brand spas
Mirror effect ABS
Compatible with MSPA Bubble Premium generation spas
Cover compatible with MSPA LITE LS04-NA spa
Color: Navy Blue
Attention, basin not included
MSPA heater compatible only with Mspa Concept and Frame inflatable spas
Equipped with a flow detector
Manufacturer reference: B9301719
Dimensions: 150x118mm
Replaces reference B9301523
MSPA References: B9300107 - B0301465
Enhances the protection of your inflatable spa
2 models available: 4 or 6 persons
1 kg Bromine Tablets
1 Floating Dispenser
MSPA reference: B9301311
Compatible with Jombo hand pumps
Nozzles + gasket included.
External diameter : 145mm
Length : 256mm
Top : 49mm opening
Bottom : 49mm opening
Guillaume G.
Live rapide
Guillaume G.
Livraison rapide Conforme à ma commande
Poussier F.
Le produit était trop peu emballé et protégé.
Christelle D.
Très bien produit bien protéger
Christophe R.
Parfait et envoie rapide je conseil (bravo).
Anonymous A.
Pièce identique
Christophe V.
Remplace parfaitement la pièce d'origine
Christophe V.
Conforme à la description. A voir dans le temps
Gallafrio L.
Le produit commandé ne correspondait pas à 100 % à celui que je cherchais; une prise différait. En revanche avec un peu de bricolage, j'ai pu récupérer la prise de mon ancienne pièce, couper les câbles et raccorder la bonne pièce.
Annie P.
Livraison rapide, exactement le produit commandé