Inflatable spas (page 2)
251 products
Compatible with MSPA Gen2, Gen2+, and New2+ motor blocks
Includes pump, heater, and union gasket
Compatible with Ospazia, Aquaspa, Bcool II, Sunbay, Hespéride, Lumix, Infinite Spa, and more..
Mspa Reference: B9301478
Compatible with: Mspa MONO 2020 and TUSCANY 2020 inflatable spa housings
Dimensions: Length: 27cm - Width: 15cm - Height: 9.5cm
Floats on the surface or attaches to the edge of the spa
LITE 2020 / Delight Keypad for Mspa inflatable spas
Compatible with MSPA Bubble spas of LITE 2020 and DELIGHT generation
Old MSPA reference: B9301192
New MSPA reference: B9301278
Sold without cable
Bestway Reference: BW58323
Outer Diameter: 105mm
Length: 80mm
Top: Opening of 51mm
Bottom: Opening of 51mm
Compatible with many inflatable spa brands
Diameter: 59 mm
Compatible with all generations of MSPA spas.
Compatible with all MSPA generations
Spa skimmer
Allows for removing surface debris
Unique circular design suitable for spa contours
pH Minus Powder - 1.5kg Box
MSPA Reference: B0301976 - B0302010
White PVC cover for inflatable spas.
2 models: 4-seater (120cm x 120cm) and 6-seater (150cm x 150cm).
pH-Plus Powder - 1kg Box
Compatible with 2015 LITE generation MSPA Bubble spas.
BoospaClean Range by Boospa.
Suction / Discharge Nozzle is compatible with MSPA inflatable spas having a single outlet in their pool going towards their motor block
MSPA Reference: B9301403
BoospaClean Range by Boospa.
Ospazia
Dimensions:
Height: 83 mm
Diameter: 104 mm
Inner diameter thread #1: 60 mm
Inner diameter thread #2: 31 mm
Compatible with Aquaspa, Ospazia, Becool II, Alton family, Hespéride, Lumix, Infinite Spa..
Sensor length: 25 mm
Cleans and descales cartridge or sand filters
Box of 8 tablets
Heating Block + Pump Replacement Kit for LITE, BERGEN, TEKAPO, OTTOMAN, and STARRY models manufactured in 2020 and 2021
Includes pump, complete heating block, flow sensors + probes
B9301405 - B9301406 (B9301453)
Reference MSPA: B9300679
Compatible with MSPA Bubble Lite and Lite 2015 generation spas / Not compatible with Lite 2020 generations
MSPA reference: B0301560
Compatible with MSPA Bubble spas of Gen 2 / Gen 2+ / New 2+ generation
AC 230V - 50 Hz - 900 W
White PVC inflatable spa cover by MSPA for inflatable spas.
For 4-seater or 6-seater spas.
Compatible with all MSPA models.
Repair Kit for MSPA Inflatable Spas
Available in 2 colors: Black or Transparent
Sold in a pack of 2 fittings of 15cm X 10cm each
Glue included
Compatible with Elite & Premium spas
MSPA reference: B9300933
Attention: this board is the spa's motherboard and is located in the motor block. It is not the one located under the control panel.
Blower (air blower) for Aquaspa, Ospazia, Bcool-II, Alton Family, Heperide, Sunbay, Lumix, Infinite Spa...
To be installed inside the motor block.
Manufacturer reference: B9301613
Compatible with MSPA LITE 2020/2021/2022 spas with or without UVC
includes UV option
B Cool II - Ospazia - AquaspaDimensions:
Height: 83 mm
Diameter: 104 mm
Inner thread diameter: 60 mm
Water filling
Positioned between the pump and the heater
Allows detecting the presence of flow in the heater circuit
MSPA reference: B9301234
Compatible with MSPA Delight generation spas
Repair Kit for MSPA Inflatable Spas
Available in 2 colors: Black or Transparent
Sold in a set of 2 connectors measuring 15cm X 10cm each
Glue included
Compatible with 2020 Lite generation MSPA spas
MSPA Reference: B9301406
Gasket not included
Compatible with Premium generation MSPA Bubble spas
MSPA Reference: B0800017
Compatible with Gen 2 Gen 2+ and New2+ spa generations
Inflatable MSPA Spa Starter Kit
The essentials for maintaining your inflatable spa
Includes: 1 box of bromine, 1 box of chlorine-free shock, 1 dispenser, and 2 MSPA filters.
It allows you to check that your spa is properly inflated.
MSPA Reference: B9301213
Capacity: 6 people
Dimensions: 173cm x 70 cm
Weight: 20kg
Sold without its motor block
Cover NOT included
Liquid Anti-Algae - 1L bottle.
Dimensions: 108 x 57 mm
Complete package for starting up and treating your spa including: Bromine tablets (1kg), Non-Chlorine Shock (1.2kg), Floating dispenser.
MSPA Reference: D0101641
Outer diameter of the seal: 44.7mm
Compatible with motor blocks of Lite, Lite 2015, Jb301, and JB304 generations
Length: approximately 80cm
One gasket included
Cristiano M.
Prix bonne me livraison cher
Grégory C.
Correspond à l'annonce
Christophe L.
Très bien
Samuel B.
la piece fonctionne parfaitement
Tony S.
Très bon article conforme
Virginie A.
RAS fonctionne très bien
Franck B.
parfait
Géraldine V.
Parfait produit de très bonne qualité
Géraldine V.
Parfait correspond parfaitement à mon spa
Géraldine V.
Parfait correspond à ma demande