The Waterway Executive Euro pump is undoubtedly the most common and reputable pump used in spas sold in France and Europe. This pump features an Italian EMG electric motor, ensuring silence and reliability.
It has been installed in top spa brands such as Jacuzzi, Hotspring, or Caldera.
This product sheet presents the Single-speed models.
For the Dual-speed models, click on the following link: Spa pump Executive Euro Dual-speed This is the
56 Frame version corresponding to the motor size.
This pump is different from the 48 Frame version, which is smaller. The manufacturer increased the motor size to make it more robust and reliable. It is essential to correctly identify the frame of your WATERWAY Executive Euro pump.
Specificity of the Executive Euro pump - WATERWAY- High-performance spa massage pump manufactured by the renowned Waterway brand (USA)
- Reliable Italian EMG motor.
- 2 double shielded ball bearings, moisture-resistant with grease for quieter operation and extended lifespan
- Single-speed motor
- Capacitor (start and stop) for lower energy consumption (2HP: 25µF / 3HP: 40µF)
- Motor protection
- Manufactured with IPX5 protection
- 78mm male threaded suction connection (94mm optional)
- 78mm male threaded discharge connection
Summary of available Executive Euro models in 56 Frame: Single-speed:- 2HP (1500 watts)
- 78mm suction: PF-20-1N22X replaces reference 3R10850-OD
- 94mm suction: PF-20-1N22X25
- 2.5HP (2000 watts)
- 78mm suction: PF-25-1N22X (Obsolete: replaced by the 3HP model)
- 3HP (2250 watts)
- 78mm suction: PF-30-1N22X replaces references 3R11250-0D or PF-30-1N22C4
- 94mm suction: PF-30-1N22X25
Dual-speed:
- 2HP (1500 watts)
- 78mm suction: PF-20-2N22X replaces reference 3R20850-0D
- 94mm suction: PF-20-2N22X25
- 3.2HP (2480 watts)
- 78mm suction: PF-25-2N22X replaces reference PF52N22X
- 3.5HP (2710 watts)
- 78mm suction: PF-30-2N22X replaces references 3R21050-0D or PF522N25X or PF-30-2N22C
- 94mm suction: PF-30-2N22X25 replaces reference PF52-N25X-25SP
Technical Schemas
DIMENSIONS:
Pipe Connections
Delivered without outlet fittingsYou can also reuse your old pipe fittings if they are still functional. If your piping is different, access our range of
Fittings and Unions to find the fitting that matches your piping
The pump body is adjustable to fit your piping. You can have the discharge on the left or right based on your setup. Simply unscrew the 4 motor screws to turn your pump body in the desired direction. Then, reinstall the screws securely.
Electrical Connection
The pump is supplied without a connection cable or plug. You can keep your old cable to connect this new pump. If your plug is no longer usable, you can opt for new plugs in our
Cables and Plugs for Spas section
Here are the most commonly used Plugs in the Spa industry: |  |
| Amp Plug | J&J Plug (PIN positions vary depending on the device) |