WATERWAY (page 3)
261 products
WATERWAY reference: 519-3060
Allows connecting an ozonator to the water circuit to inject ozone directly
3/4" inlet and outlet - 3/8" injector
Reference Waterway 672-4200
Made of high-quality ABS
Connects to the filtration pump circuit
Compatible with C-4326 / C-4950 filters
Filter included
Length: 93mm
WATERWAY Reference: 519-4021
Reference Wateway 672-4140
Made of high-quality ABS
Reference Wateway: 672-4910
High-quality ABS material
Made of light grey ABS, White, or Stainless Steel
Visible face diameter: 131 mm
For 2" piping
Manufacturer reference: 550-4050B
Dimensions: 120 x 127 x 26mm
Compatible with pumps and blowers with a 1" outlet (Tiny might, etc...)
Connects to a 48mm thread.
Inner Diameter 1" (33.5mm)
Embedded hole diameter: 55mm
Front diameter: 68mm
Water inlet: 3/4” (19mm) fitting
Air inlet: 3/8” (9mm) fitting
Ring and gasket included
Significantly reduces the noise of your spa pump.
Compatible with most pumps.
The most common pump used in spas sold in France and Europe
Power: 2 HP – 1500 W – 56-frame motor
Outlet fittings and connection cable + plug not included
Waterway Reference: 672-4980
Also available in: 94mm suction
Compatible with WATERWAY Executive Euro brand pumps
The most widely used pump in spas sold in France and Europe
Power: 3 HP – 2250 W – 56-frame motor
Outlet fittings and connection cable + plug not included
Dimensions: 259 x 266 mm
WATERWAY Reference: 3421621-CE
One of the most common pumps used in spas sold in France and Europe
Power: 2 HP (1.38 kW)
Normally connects to 2'' (60 mm) plumbing
Sold without fittings or cable
Complete Oval Skimmer with Basket
Filtration inlet 50mm
Perfectly suited for concrete spas.
Filter not included
56 Frame Motor
Compatible with Executive Euro 94mm - 4HP pumps
Greatly reduces the noise from your spa pump.
Compatible with most pumps.
Manufacturer's reference: 672-1780
Waterway Reference 411-4080
Connection: Male / Female
Orientation: 90°
Pipe Size: 1.5" (48mm) / 1/2" (21mm)
Reference WATERWAY: 400-2060
Connection type: Female
Pipe diameter: 1/2" (21mm)
Hozelock adapter - Gardena system included
No cap provided
Power: 3 HP (2.1 kW)
Outputs: in 2"
2" outlet connections (60 mm) - connection cable and plug not included
Reference Wateway 672-8010
Made of high-quality ABS
That is 1 x 60 mm inside to 6 x 27 mm inside.
Length: 112 mm
Front diameter (ABS): 100 mm
Thread diameter: 36 mm
External diameter of water inlet: 16mm
Socket not included
Waterway Reference: 229-7610S
Length: 140 mm
Front Diameter (Stainless Steel): 129 mm
Thread Diameter: 65 mm
Outer Water Inlet Diameter: 25 mm
Jet Body Length: 105 mm
Embedding hole diameter: 38mm
Front diameter: 48mm
Water inlet: 3/4” (19mm) barbed fitting
Air inlet: 3/8” (9mm) barbed fitting
Socket sold with ring and gasket
Single speed, 2HP (1.38kW)
Connections on 78mm threaded male fittings.
The Hi Flo pump is normally connected to 2'' (60mm) piping.
Quiet operation
Power: 1/8 HP – 230 V – 50 Hz – 48-frame motor
Maximum flow rate: 190 liters per minute
Connection: fits 1.5" plumbing – connection cable not included
Size #8 - Type 32
Used on WATERWAY skimmers and pump bodies
2HP and 3HP: 319-1380 / 4HP and 5HP: 319-1370
Check Valve 600-5000 for Blower
Connection Type: Male/Female (M/F/F)
Pipe Diameter: 1" (33mm)
Length: 137 mm
Front Diameter (Stainless Steel): 129 mm
Reference WATERWAY: 600-3040
Cap Diameter: 93mm
Pipe Diameter: 2" (60mm)
Reference Wateway 672-4210
Made of high-quality ABS
Made of light gray ABS, White, or Stainless Steel
Visible face diameter: 131 mm
For 2" piping
Allows you to control the diffusion of bromine/chlorine in your spa
Adjustable diffusion knob
Reduction: Female Threaded 1.5" (63mm) to Male Threaded 70mm
Outer diameter: 18cm
Compatible with WATERWAY and Aquaflo pumps in 56 Frame
WATERWAY reference: CV090PL
Inner diameter inlet 1: 73mm
Inner diameter inlet 2: 60mm
Compatible with Super Hi-Flo 2.5" suction drain
Made of high-quality ABS
Compatible with Executive Euro pumps - WATERWAY
56 and 48 Frames - Impeller, seal, flange gasket included
Various power options available - 78mm suction and discharge
Noe R.
Produit robuste
Philippe S.
Très bon rapport qualité/prix
Dylan M.
Raccord correct sans vous je pense que j’aurais pas su le réparer
Anonymous A.
Perfekt 100%
Anonymous A.
Perfekt 100%
Nicolas B.
Produit d'origine
Jean-François J.
okok
Eric B.
tre bien
Christian P.
Ne convient pas a mon spas lamelight
Eric F.
Parfait, pièce montée sans problème