BALBOA INSTRUMENTS
471 products
Can replace the following references:
6472-857 (Old reference)
6472-841 (New reference)
Balboa reference: 54906
New model (Compatible with old generation)
Compatible with Balboa Wave3one ozonator
Power 7W (original model: 4W)
Length 25cm
Compatible with Balboa heaters
Male AMP plug / connector + 4 crimp contacts
To connect your spa equipment directly to your electronic board.
Widely used in the spa industry, especially on Balboa Instruments control boxes.
Length 25cm
Compatible with Balboa heaters
- New
Reference: 307013
For VL240 Balboa keypad
4-button model
- New
Compatible with BP200
Power: 3 kW.
Included: 2" (60 mm) connector.
Balboa Reference: 58450
- Refurbished
Product feature: Some signs of wear
Characteristics: Compatible with TP range keyboards and touch screen spaTouch. It can also be remotely managed with your smartphone by adding a WiFi module.
Compatible with Balboa GS series control boxes.
Balboa reference: 54108
Front panel sticker included.
BALBOA Reference: 54806
Length: 57 mm
Front diameter: 91 mm
Fixing zone diameter: 54 mm
Manufacturer reference: 10-4820WHT
Jet for BALBOA hydro-massage nozzle
Balboa Reference: 59304
Control your spa from your smartphone or tablet (Android or iOS)
Compatible with Balboa BP series control units
Compatible with smart voice commands Alexa and Google
Male AMP plug / connector + 2 crimp contacts
Used to connect your spa equipment directly to your electronic board.
Commonly used in the spa industry, especially on Balboa Instruments control boxes.
BP6013G3 Electronic control box + heater
Balboa reference: 56833
3 massage pumps + 1 blower
Available WIFI module that allows remote control.
Balboa Hydro-air Reference 1030025
High performance and quiet operation
Power: 0.25 HP – 200 watts
Supplied without fittings
Includes connection cable + AMP connector
Made in Denmark.
BALBOA Reference: 1031025
High performance and quiet operation
Power: 0.25 HP – 200 watts – 230 V 50 Hz
Supplied without fittings
Includes connection cable + AMP connector
Front diameter: 69mm
BALBOA Reference: 50-3420WHT
Compatible with Wall Fitting 10-4320
Manufacturer reference: 26397
Amperage: 1/8 A
Sold individually
Reduction: Male 1/2" (21mm) to Female 20mm
Allows the conversion from imperial (inch) to metric (mm) system.
Complete Spa Light 8.3 cm Diameter
Plug Cable Amp + 12V bulb included
Connection: AC12V - 2 wires
Front Diameter: 83mm
Compatible with pumps:
Hi-flow, Varimax, Durajet, 103100-NHP, 1023110-NHP, Niagara, and HA440NG
The Titanium version of the 58118 heater
Compatible with GS/GL2000 series
Second generation of the 100% touch SpaTouch color keypad
Compatible with BP series BALBOA systems
Reference BALBOA: 25662-1
Length: 7.5 meters
Hydroair Reference: 1023024
Power: 1.5 HP (1.3 kW) – 220-240V 50Hz
Supplied with piping fittings + connection cable with AMP connector
This model replaces the ITT Hydroair Magnaflow 440 pump, as its production has been discontinued
Third-generation SpaTouch color touchscreen keypad
Compatible with BALBOA BP series systems
5-inch screen
Can control: 1 circulation pump, 1 single or dual-speed pump, 1 single-speed pump, 1 blower, 1 ozonator, 1 light, 1 audio system.
Allows you to mount the M7 sensor on your heater while maintaining its waterproof seal.
4-button model
For Duplex systems.
Compatible with Balboa GSxxx or GSxxxZ series control boxes.
Balboa Reference: 55080 (white borders).
Compatible with certain Balboa BP and GS control systems
Replaces reference: 55138
Compatible with Balboa control boxes from the GSxxxSZ series.
Balboa reference: 53189 (Blower/Jets1/Jets2/Light/Mode/Warm/Cool).
Water inlet in 1.5" F (48mm interior)
Air inlet in 1/2" F (21mm interior)
Nozzle outlet in 1.5" M (48mm exterior) or in 40mm F
Titanium resistance
Power: 2.9kW
Reference Caldera/Hotspring®: 1076701
Length 25cm
Compatible with heaters: Balboa
Embedded hole diameter: 37-45mm
Front diameter: 48mm
External water inlet diameter: 3/4” (19mm)
External air inlet diameter: 3/8” (9.5mm)
Rings (for tightening and compensation) + gasket included
Compatible with Balboa GS501Z control systems
Balboa electronic board reference: 54512-01
Compatible with heaters 58118 and 58107
Printed Circuit Board for Balboa BP6013G3 Control Box
Balboa Reference: 56833-03
Dimensions: 280 x 170 x 48.50 mm
Nicolas D.
Marche très bien facile à installer rien à dire
Marc P.
Produit conforme à la description !
Antoine M.
Manque les notices de branchements Sinon tout me paraît correct, Merci à vous
Antoine M.
Manque notice de branchement
Luc G.
J'aurais aimé avoir des informations pour la remise en route
Frederic F.
conforme a mes attentes !
Joël B.
Le hublot est en 2 parties. Il y a l'écrou et 2 joints Il n'y a pas de joint entre les 2 parties. est-ce normal ?
Anonymous A.
Pas encore installé mais c’est un boîtier qui m’a était conseillé
Christophe C.
Parfait conforme au produit
Remy B.
fonctionne très bien