GECKO
136 products
- Best Seller
Bromicharge by GECKO
The Bromicharge® is the consumable product for the IN.Clear system.
It consists of sodium bromide enabling the production of bromine through electrolysis.
This control box can manage: 1 circulation pump, 2 massage pumps, 1 ozonator or blower, 1 light.
Compatible with Gecko 2 kW SSPA heater
Compatible with Gecko 3 kW Universal heater
Replaces the discontinued Gecko Dtec 1.8 PSI pressure switch
Compatible with Gecko control boxes: in.xm2, in.xe, in.yt, and in.ye
Manufacturer reference: 0607-008087
- New
- Refurbished
Product Specificity: Missing additional wiring and slight scratches on the front
Features: Compatible with GECKO control boxes
Gecko Reference: 52272000
Gaskets included
Capacitive touchscreen color display
Gecko Reference: 0607-005008
1/4'' Drain Plug for Gecko pump series Flo-Master XP2, Flo-Master XP2e, and Flo-Master XP3
Integrated 3kW Heater
Input: 230-240VAC 50Hz - 48A max.
Can control up to 3 pumps and/or blowers
2-inch connection
Compatible with GECKO control boxes series IN.XE, IN.XM, IN.XM2, and Y.
Gecko reference: 0607 - 008064
Gecko Reference 9920-400446
Manufacturer Reference: 0810-690000
Power: 230 W (~0.25 HP)
Maximum flow rate: 320 liters per minute
Cable + AMP plug included
Compatible with Gecko Y and X series control boxes.
GECKO Reference: 0607-008030
Part of the heat.wave range and therefore compatible with the in.yj control system only.
Allows you to connect a dual-speed pump in your spa to your IN.XM or IN.XE system.
Compatible with Gecko Y and X series control boxes.
This is Gecko's compact control box. It allows for the control of a dual-speed pump, a massage pump, an ozonator, an auxiliary outlet, and 12V lighting. Available in 2 versions: IN.YJ-2 and IN.YJ-30.
Heater for Gecko IN.YJ-V3 system
Manufacturer part number: 0613-421011
Resistance type: Incoloy 800
Power: 3000 W
Heating length: 380 mm
Total length (with union): 490 mm
Internal diameter: 60 mm
- Refurbished
Product Feature: Controls 1 massage pump
Specifications: Union fittings and cables not included, Integrated 3 kW heater. Works perfectly
GECKO IN.THERM Heater 2kW / 3.8kW / 4kW
Compatible with GECKO control boxes series IN.XE and IN.XM
4kW model replaced by the 3.8kW model
Allows you to connect a component of your spa to the electronic board
Compatible with units equipped with a "Mini JJ" plug
Seal for Gecko Drain Plug for Gecko pump series Flo-Master XP2, Flo-Master XP2e, and Flo-Master XP3
Gecko Reference: 0605-500010
IN.CLEAR Bromine Generator
Allows for a constant production of Bromine in your spa water.
Significantly reduces the products needed for its maintenance.
Electrical connection: 220-240V
Control panel not included
Red 3-pin plug for Y-Class and M-Class systems
Gecko Reference: 9920-400489
Seal for Gecko drain plug for Aqua-Flo Gecko Circ-Master and Flo-Master Series pump lines.
For 12V LED lighting - 2 Wires
Red plug with 3 pins and female AMP plug with 2 pins
Length: approximately 2.50 meters
Compatible with GECKO M-Class control boxes.
Compatible with Gecko Y and X series control boxes.
IN.XE Electronic Box + K.200 Keypad + Cables Kit
Sturdy, compact, ingenious, and innovative, it is mainly designed for entry-level spas.
Gecko Reference 9920-400643
The 9920-400643 sensor is now replaced by the 9920-400446 sensor
Gecko reference 9920-400125
Automated water sanitation
GECKO Reference: 0607-008010
Cable included
Alain C.
super facile a remplacer
Gil G.
Article conforme à notre attente .
Yann H.
très réactif et expédition rapide
Christian L.
très bien
Anonymous A.
C'est juste un câble
Jacquesje L.
Excellent
Olivier B.
JE NE PEUX PAS DONNER D'AVIS PUISQUE JE N'AI PAS RECU LA POMPE
Laurence F.
Aucune idée car on ne m’a pas envoyé la bonne référence .
Corinne P.
Nickel
Philippe C.
Tout très bien