Waterlab Gecko Pack - Probe + Chamber + Wifi Module in.touch 3+
| Product Type | Spa water quality monitoring system |
| System | Gecko Waterlab |
| Measurements | pH, ORP (Redox), and temperature |
| Pack Composition | Waterlab Probe + Water Sanitizer Chamber + Wifi Module in.touch 3+ |
| Waterlab Chamber Reference | 0616-521001 |
| Waterlab Probe Reference | 9960-400001 |
| Wifi Module Reference | 0608-521054 |
| Chamber Configuration | 2 bypass valves and drain plug at the bottom |
| Compatibility | Gecko in.ye, in.yj, and in.yt systems (versions 2 and 3) |
| Probe Connector | Multi-pin circular connector |
| Mobile App | Gecko Smart Spa Control (iOS and Android) |
The Waterlab Gecko pack allows continuous monitoring of your spa water quality. It combines a multiparameter probe, a water sanitizer chamber, and the Wifi module in.touch 3+. The system measures pH, Redox potential (ORP), and temperature, then transmits the data to the Gecko Smart Spa Control mobile app.
| Product | Dimensions |
| Waterlab Probe | Length: 270 mm Diameter: 60 mm Cable length: 31 cm |
| Waterlab Chamber | Width: 225 mm Height: 230 mm Connection diameter: 21.5 mm |
| in.touch 3+ Wifi Module | Main module: 139 mm x 98.5 mm Receiver module: 82.5 mm x 69.5 mm |
Compatibility and Pre-purchase Checks
This pack is exclusively designed for the Gecko Waterlab system. It requires the use of a compatible Gecko control system, specifically the in.ye, in.yj, and in.yt series in versions 2 and 3. Also, ensure the presence of the intended installation environment under the spa to integrate the Waterlab chamber into the circuit.
Installation / Replacement
The Waterlab chamber is installed horizontally in a protected but accessible area under the spa. It is equipped with two bypass valves and a drain plug. The probe screws directly into the threaded body of the chamber and transmits measurements to the system via the Wifi module in.touch 3+.
What You Receive
The pack includes a Waterlab Gecko water sanitizer chamber, a Waterlab multiparameter probe, and the Wifi module in.touch 3+. The module comes with a spa-side transmitter, a home-side transmitter, an Ethernet cable, and a mains power supply with a micro-USB cable.
Frequently Asked Questions
What does the Gecko Waterlab system measure?
The Waterlab system automatically monitors several spa water parameters. The multiparameter probe measures pH, Redox potential (ORP), and temperature to continuously track water quality.
How are the data accessed?
The measurements are transmitted via the Wifi module in.touch 3+. They can then be accessed through the Gecko Smart Spa Control mobile app available on iOS and Android.
Does the Waterlab probe require maintenance?
Maintaining the probe is simple. It is recommended to regularly check and clean the electrodes to maintain measurement accuracy and reliability.
What are the possible delivery methods?
Delivery depends on the product, your country, and your address. Depending on the order, shipping can be handled by DPD, GLS, Colissimo, or DHL. The exact options will be displayed in your cart.
How can I track my package?
You will receive email notifications at different stages, with a tracking link or number upon shipment. You can also check in your customer account.
Can I return the product if I made a mistake?
A return is possible within 14 days after receipt. For industry professionals, this period can be extended to 60 days.
What payment methods are accepted?
Payment can be made by credit card, PayPal, 4X PayPal, bank transfer, or check. For bank transfers, shipping will occur after the funds are received.