All Mspa parts (page 2)
- New
154 products
Inflatable MSPA Spa Starter Kit
The essentials for maintaining your inflatable spa
Includes: 1 box of bromine, 1 box of chlorine-free shock, 1 dispenser, and 2 MSPA filters.
MSPA Reference: B0800017
Compatible with Gen 2 Gen 2+ and New2+ spa generations
MSPA Reference: B9301213
Capacity: 6 people
Dimensions: 173cm x 70 cm
Weight: 20kg
Sold without its motor block
Cover NOT included
Dimensions: 108 x 57 mm
MSPA Reference: D0101641
Outer diameter of the seal: 44.7mm
Compatible with motor blocks of Lite, Lite 2015, Jb301, and JB304 generations
Length: approximately 80cm
One gasket included
MSPA Reference: B9301037
Compatible with Premium spa generation
Includes 1 injector, gasket, and tightening nut
Blower LITE 2020 for MSPA spa
Compatible with MSPA Bubble Lite 2020 generation spas
MSPA Reference: B9301408
MSPA Reference: B9301427
Features 6 snap fasteners
Compatible with MSPA round inflatable spas with a maximum outer diameter of 180 cm.
Color: grey
Attention, only the cover and the floor mat are included, not the spa itself.
Heating Block + Pump Replacement Kit for LITE, BERGEN, TEKAPO, OTTOMAN, and STARRY models manufactured in 2022
Includes pump, complete heating block, flow sensors + probes
MSPA Reference: B9301407
Checks for water flow in the heater circuit
Sensor sold individually
Screws not included
Reference: B9301723
Diameter: 37 mm
Shape: Octagonal
Compatible with MSPA inflatable spas from the LITE, Comfort, and Delight ranges
MSPA reference: B0301587
Compatible with all generations of spas except DELIGHT and Tuscany
Compatible with CONCEPT 2020 and FRAME 2021 / 2022 spas
MSPA Reference: B0301976 - B0302010
In white PVC for inflatable spas.
2 models available: 4 seats (120cm x 120cm) and 6 seats (150cm x 150cm).
Mspa Reference: B9301393
Replace your damaged/broken strap loop with a new one
Glue not included
Heater for MSPA inflatable spas
It is equipped with an ozone injector
Do not confuse with reference B9301193 which does not have an ozone injector
Inflatable spa cover for MSPA MONO C-MO069
Cover sold separately, motor unit and basin not included
MSPA Reference: B9301314
Outer Diameter: 58 mm
Inner Diameter: 39.50 mm
Inflatable spa cover for 4-person square MSPA Gray LS04
Dimensions: 170 x 170 cm
Sold WITHOUT the tub shown in the photos
- Compatible with MSPA Lite LS06-GR.
- Sold separately, without tub or control unit.
- Provides insulation and protection for the spa.
- Original clips and mounting system.
MSPA references : B9301650/B9301595
Compatible with MSpa MUSE series spas 2021-2024
Compatible models : MSpa Carlton and MSpa Otium
Sold without cable
Reference MSPA: B9301499
Cover for 4-person MSPA inflatable spa
Dimensions: 158 x 158 cm
Color: gray
8 straps and clips included
Tub NOT included
MSPA Reference: B9301395
Thread Diameter: 39mm
Thread Length: 25mm
Manufacturer reference: C-ST061/062
Dimensions (inflated): 218 cm x 218 cm x 70 cm
Capacity: 6 people
LED lighting not included – compatible for installation
Tub sold separately – motor unit not included
Compatible with MSPA Bubble Premium generation spas
Compatible with MSPA brand spas
Mirror effect ABS
Cover compatible with MSPA LITE LS04-NA spa
Color: Navy Blue
Attention, basin not included
Manufacturer reference: B9301617
Compatible with MSpa Europe spas only
MSPA heater compatible only with Mspa Concept and Frame inflatable spas
Equipped with a flow detector
MSPA reference: B9301311
Compatible with Jombo hand pumps
Nozzles + gasket included.
MSPA References: B9300107 - B0301465
Enhances the protection of your inflatable spa
2 models available: 4 or 6 persons
Manufacturer reference: B9301719
Dimensions: 150x118mm
Replaces reference B9301523
MSPA References: B9300107 - B0301465
Enhances the protection of your inflatable hot tub
2 models available: 4 or 6 persons
Compatible with the Premium spa generation
These three tools will help you remove jet covers, jets, and return/suction nozzles
For 4-seater or 6-seater spa
Compatible with most inflatable spa brands.
In black or gray depending on available stock
Compatible with Tuscany spas by MSPA brand
Used for inflating the pool.
ABS handle to clip on.
Compatible with Gen 2+ / New 2+ spa generation
To be installed inside the motor block.
For MSPA spas of Gen2/Gen2+/New2+ generations
Length: 1.5 meters
To be installed inside the motor block.
For Mspa spas of all generations
Manufacturer reference: LS06-GR
Dimensions (inflated): 185 cm x 185 cm x 68 cm
Capacity: 6 people
Clips on the tub and remote control included
Pool sold separately – cover and motor unit not included
Maik H.
Top Qualität des Produktes
Stephane F.
très bien
Véronique P.
Trop cher scandaleux
Vanessa B.
parfait
Thierry P.
bonne qualité
Julia G.
Works as stated, with other equipment.
Cristiano M.
Prix bonne me livraison cher
Grégory C.
Correspond à l'annonce
Samuel B.
la piece fonctionne parfaitement
Tony S.
Très bon article conforme