Hydro-Air Pneumatic Control Genesis Blower
The blower is a blower that sends air through small nozzles from the bottom of the pool.
This creates thousands of bubbles rising to the surface.
Supplies air to 8 to 15 nozzles
Maximum distance from the pool: 5 meters
Union fittings provided: 32mm
Connects to a 32mm outer diameter pipe
This pneumatic control blower is ideal for spas without a control box or electronic board.
You can control it directly by simply pressing the button.
The pneumatic button is sold separately
If water has infiltrated your old blower, we recommend checking the condition of the non-return valve.
Technical characteristics of the Hydro-Air Genesis Blower:
- Automatic air system drying
- Pneumatic Model - Electronic model available
- Excellent performance
- Supplied with a 1.50-meter cable
- IPX5 protection (total product waterproofing)
- Pulsating massage mode
- Silent operation
- 1.5'' thread (47 mm outer thread diameter)
- Equipment protection by a blue Polypropylene cover (water-resistant, rigid, and abrasion-resistant)
Dimensions of Genesis Hydro-Air Blowers 500W, 700W, 900W, 1200W
Outer thread diameter 47 mm
Inner diameter 34 mm
| HYDRO-AIR GENESIS BLOWER MODELS with pneumatic control |
| Article Reference | Power (Watts) | V / Hz | Pneumatic Control | 3-speed Program |
| G50-2ANT-S | 500 W | 230 - 240V / 50-60 Hz | Yes | Yes |
| G90-2AN-S | 900 W | 230 - 240V / 50-60 Hz | Yes | No |
| G120-2AN-S | 1200 W | 230 - 240V / 50-60 Hz | Yes | No |
Characteristics of Genesis Hydro-Air blowers by Balboa:
Explanation of references:
example: G 50 - 2 XX - S
G = Genesis Blower
50 = Power: 50 = 500W; 70 = 700 W; 90 = 900 W; 120 = 1200 W
2 = Voltage: 230-240-50 Hz
XX = Model (Electronic, Pneumatic, heating, Variable speed...): See table below
References:
| NN | Standard electronic blower / control via control panel |
| AN | Pneumatic blower / control via pneumatic button |
| HN | Electronic blower with integrated heating element to prevent cold air from entering the spa |
| AH | Pneumatic blower with integrated heating element to prevent cold air from entering the spa |
| VN | Variable speed electronic blower. To be used with special touch UK01658A directly connected to the blower. See operating instructions below "VH" |
| VH | Variable speed electronic blower with "pulsating massage" mode and integrated heating element to prevent cold air from entering the spa. To be used with special touch UK01658A directly connected to the blower.
Operating instructions for "VN" and "VH":- Press On = High speed
- Press +/- = Increase/decrease blower speed
- Press ~ = "Pulsating massage" mode
- Press Off = Turn off the blower
|
| VNT | 3-speed electronic blower. To be used with an On/Off touch or LED button.
See operating instructions below "VHT" |
| VHT | 3-speed electronic blower. With "pulsating massage" mode and integrated heating element to prevent cold air from entering the spa. To be used with an On/Off touch or LED button.
Operating instructions for "VNT" and "VHT"- 1st button press = High speed
- 2nd press = Medium speed
- 3rd press = Low speed
- 4th press = "Pulsating massage" mode
- 5th press = Turn off the blower
Automatic safety mode: shuts off the blower after 30 minutes, simply press the button to restart it. |
| ANT* | 3-speed pneumatic blower with "pulsating massage" mode. To be used with a pneumatic push-button.
See operating instructions below "AHT" |
| AHT* | Pneumatic 3-speed blower with "pulsating massage" mode, with integrated heating element to prevent cold air from entering the spa. To be used with a pneumatic push-button.
Operating instructions for "VNT" and "VHT"- 1st button press = High speed
- 2nd press = Medium speed
- 3rd press = Low speed
- 4th press = "Pulsating massage" mode
- 5th press = Turn off the blower
Automatic safety mode: shuts off the blower after 30 minutes, simply press the button to restart it. |
