Hydro-Air Pneumatic Control Genesis Blower
Available power: 500, 900, and 1200 Watts.
The blower is an air blower that sends air through small nozzles from the bottom of the pool.
This creates thousands of bubbles rising to the surface.
Can supply air to 8 to 15 nozzles.
Maximum pool distance: 5 meters
Union fittings provided: 32mm
Connects to a 32mm outer diameter piping
This pneumatic control blower is ideal for spas without control units or electronic boards.
It can be controlled directly by a simple button press.
The pneumatic button is sold separately
If water has infiltrated your old blower, we recommend checking the condition of the check valve.
Technical characteristics of the Hydro-Air Genesis Blower:
- Automatic air system drying
- Pneumatic Model - Electronic model available
- Excellent performance
- Supplied with a 1.50-meter cable
- IPX5 protection (total product waterproofing)
- Pulsed massage mode
- Silent operation
- 1.5'' thread (47 mm outer thread diameter)
- Equipment protection by a blue Polypropylene cover (water-resistant, rigid, and abrasion-resistant)
Dimensions of Genesis Hydro-Air Blowers 500W, 700W, 900W, 1200W
Outer thread diameter 47 mm
Inner diameter 34 mm
| HYDRO-AIR GENESIS BLOWER MODELS with Pneumatic Control |
| Article Reference | Power (Watts) | V / Hz | Pneumatic Control | 3-Speed Program |
| G50-2ANT-S | 500 W | 230 - 240V / 50-60 Hz | Yes | Yes |
| G90-2AN-S | 900 W | 230 - 240V / 50-60 Hz | Yes | No |
| G120-2AN-S | 1200 W | 230 - 240V / 50-60 Hz | Yes | No |
Characteristics of Balboa's Hydro-Air Genesis Blowers:
Explanation of references:
example: G 50 - 2 XX - S
G = Genesis Blower
50 = Power: 50 = 500W; 70 = 700 W; 90 = 900 W; 120 = 1200 W
2 = Voltage: 230-240-50 Hz
XX = Model (Electronic, Pneumatic, Heating, Variable Speed...): See table below
References:
| NN | Standard Electronic Blower / control via control panel |
| AN | Pneumatic Blower / control via pneumatic button |
| HN | Electronic Blower with integrated heating element to prevent cold air from entering the spa |
| AH | Pneumatic Blower with integrated heating element to prevent cold air from entering the spa |
| VN | Variable speed Electronic Blower. To be used with special touch UK01658A directly connected to the blower. See operating instructions below "VH" |
| VH | Variable speed Electronic Blower with "pulsed massage" mode and integrated heating element to prevent cold air from entering the spa. To be used with special touch UK01658A directly connected to the blower.
Operating instructions for "VN" and "VH":- Press On = High speed
- Press +/- = Increase/decrease blower speed
- Press ~ = "Pulsed massage" mode
- Press Off = Turn off the blower
|
| VNT | 3-speed Electronic Blower. To be used with an On/Off touch or LED button.
See operating instructions below "VHT" |
| VHT | 3-speed Electronic Blower. With "pulsed massage" mode and integrated heating element to prevent cold air from entering the spa. To be used with an On/Off touch or LED button.
Operating instructions for "VNT" and "VHT"- 1st button press = High speed
- 2nd press = Medium speed
- 3rd press = Low speed
- 4th press = "Pulsed massage" mode
- 5th press = Turn off the blower
Automatic safety mode: shuts off the blower after 30 minutes, just press the button to restart. |
| ANT* | 3-speed Pneumatic Blower with "pulsed massage" mode. To be used with a pneumatic push button.
See operating instructions below "AHT" |
| AHT* | Pneumatic 3-speed Blower with "pulsed massage" mode, with integrated heating element to prevent cold air from entering the spa. To be used with a pneumatic push button.
Operating instructions for "VNT" and "VHT"- 1st button press = High speed
- 2nd press = Medium speed
- 3rd press = Low speed
- 4th press = "Pulsed massage" mode
- 5th press = Turn off the blower
Automatic safety mode: shuts off the blower after 30 minutes, just press the button to restart. |
