HYDROQUIP
63 products
Compatible with Balboa GS / GL2000 - GL2001 / BP series
Power: 3.0 kW
Included: 2" fitting (60 mm)
Hydroquip Reference: 58118
Can directly replace Balboa heater reference 58107
Length: 270mm
Distance between terminals: 33mm
Female Amp plug to connect to a pre-wired ozonator with an Amp plug.
HydroQuip Reference: 26-C3182-1S
Replaces Watkins Hot Spring heaters 73792
Temperature and Hi-Limit sensors included
Connects to a 3/4 inch hose (outer diameter)
1.5kW - 240 V - 6.25 A - 50/60 Hz - single phase
Hydroquip Reference: 26-315-U-K
Power: 2.7kW
Heating Element Type: Titanium
Compatible with all Sundance and Jacuzzi spas manufactured between 2007 and 2020
Replaces models 6500-315; 6500-844; 58335; 26-3403-1-BT-K
Power: 2.1kW + 3.4kW
Ref. Boospa: A-000000-08811
Ref. Dimension One: 01781-27
Ref. Hydroquip: 26-C3548-1-7T-F
Power: 4kW - Equipped with a pressure switch
For Caldera brand spas
Length: 175mm
Distance between terminals: 33mm
Compatible with Artic Spas heaters
Compatible with Watkins No-Fault 26-C3182-1S / 73796 heater
2 o-rings included
Power: 3Kw
Boospa Ref: A-000000-0c361
Therm Product Ref: E2300-0126ET, E2300-1027ET(X), E2300-0012
Hydroquip Ref: 27-V310-4T-K
Female Amp plug to connect to a pre-wired dual-speed pump with an Amp plug.
Astrel Reference: PFEAT3110000
This heater replaces the following models:
PFEAR2110000; PFEAR2300000; PFEAR2200000; PFEAR2210000
Power: 3000W - single-phase
Features a dual sensor (hi-limit and temperature)
Equipped with a Titanium heating element
For pipes with an outer diameter of 60mm (2")
Length: 250mm
Distance between terminals: 33mm
Manufacturer reference: 26-0601-AT-K Power: 3.6kW Titanium heater 240V - 15A - 50/60Hz For spas using an M-Class control system 2-inch (60mm) fittings included
Female Amp plug to connect to a pre-wired circulation pump with an Amp plug.
VitaSpa C2300-0010ET Spa Heater
Power: 3Kw
For VitaSpa brand spas
Female Amp connector to connect to a pre-wired circulation pump with an AMP plug.
Power: 2Kw
For spas using an S-Class control system (SSPA)
Power: 2.1kW / 3.4kW / 5.5kW Depending on installation
Hydroquip Heating Kit 26-3478-1A-BT-P for spa
2.7 kW - 240V - 11.3 Amps For 3/4" (27mm) outer diameter pipes
High limit sensor + pressure switch included
Power: 3.6Kw
For ArticSpa brand spas
2 union fittings for 2" hoses (outer diameter 60mm) included
Heater for Caldera Spa 26-3330-5S-K
Power: 4Kw
For Caldera brand spas
- Best Seller
Power: 2.1kW / 3.4kW / 5.5kW Depending on installation
For Dimension One brand spas
Jacuzzi/Sundance Spa Heater C3226-1A
Power: 4kW
For Jacuzzi or Sundance brand spas
3" to 1" Heater Connector
Placed at the outlet of a heater to connect a 1" hose
Hydroquip Reference: 42-2386-K
Power: 2.5kW
For spas using an S-Class (SSPA) or Hydroquip 6000 control system
Hydroquip Spa Heater C2550-0309ET
Power: 5.5Kw
For spas using a Hydroquip CS-9400EX control system
Delivered without connector
Hydroquip C2250-0309ET Spa Heater
Power: 2.5kW
For spas using a Hydroquip CS-9400EX control system
Power: 5.5Kw
Boospa Ref.: A-000000-0c358
Therm Product Ref.: A2550-5251ET
Hydroquip Ref.: 48-9124-AP-K
Female Amp plug to connect to a pre-wired circulation pump with an Amp plug.
Power: 2.5Kw
For CalSpas brand spas
Female Amp plug to connect to a pre-wired dual-speed pump with an Amp plug.
Manufacturer reference: AS-620U
Power: 700 W
Power supply: 240 V – 50 Hz
Boospa Ref.: A-000000-08798
Therm Product Ref.: C2200-0812ET-G
Hydroquip Ref.: 27-G0413-2S-K
Power: 2Kw
For spas using a U-Class control system
Hydroquip 4kW Universal Heater
Compatible with many control systems.
Replaces reference: C2400-5003
S-SPA and M-SPA Gecko systems use this heater.
Female Amp plug to connect to a Blower pre-wired with an Amp plug.
Electronic Board 33-0012A
Hydroquip® Reference: 33-0012A
Compatible with Hydroquip 7500 series systems
Power: 5.5Kw - Replaces heaters 73790 and 73791
For Hotspring spas manufactured after 2002
Titanium Resistance
Connection to 2" piping
"FLO-THRU" type heater
Connection to 2" plumbing
"FLO-THRU" type heater
ArticSpa A2360-5350ET Spa Heater
Power: 3.6Kw
For ArticSpa brand spas
Hydroquip® Reference: 33-0024C
Compatible with Hydroquip 6230 and 9230 systems
- 1
- 2
Robert S.
Super conseils, envoi très rapide c’est la pièce que je voulais sur un spa s’il y a plus de 10 ans bravo J’ai aussi commandé une pompe et d’autres pièces super content
Cathy V.
Je viens juste de le recevoir j'attend de le faire fonctionner afin de pouvoir répondre à votre question
Christelle F.
rien à dire identique au mien ,prix imbattable.mon spa beachcomber a 19 ans et ils ont su me trouver la pièce
Martin A.
Il est parfait RAS
Jennifer E.
Satisfait du produit
Jean-Christophe L.
Très bon produit, conforme
Jacques V.
J’attend de voire le résultat
Jean-Luc C.
Très bien comme d'habitude
Anonymous A.
réchauffeur avec résistance en titane et non en acier,livraison rapide et colis très bien emballé.
César O.
réchauffeur avec résistance en titane et non en acier,livraison rapide et colis très bien emballé.