Genesis Hydro-Air Heater Blower for Spa
- Available power: 500, 700, 900Watts.
- The blower is an air booster that sends air through small nozzles at the bottom of the pool.
- Thus, thousands of bubbles rise to the surface.
- Can supply 8 to 15 nozzles
- Maximum distance from the pool: 5 meters
Union fittings provided: 32mm
Connects to a 32mm outer diameter piping
The ideal blower for bath and spa. A unique combination of sophisticated features. The extensive Genesis range allows you to find the perfect blower for your use.
Technical Features of Genesis Hydro-Air Heater Blower:
- Automatic drying of the air system
- Electronic model controlled by a control panel connected to the control unit
- Excellent performance
- Supplied with a 1-meter cable
- IPX5 protection (total product waterproofing)
- Pulsed massage mode
- Silent operation
- 1.5'' thread (thread diameter)
- Equipment protection by a blue Polypropylene cover (water-resistant, rigid, and abrasion-resistant)
If water has infiltrated your old blower, we recommend checking the condition of the non-return valve.
Dimensions of Genesis Hydro-Air Blowers 500W, 700W, 900W
- Outer thread diameter: 47 mm
- Inner diameter: 34 mm
Features of Genesis Hydro-Air blowers by Balboa:
Explanation of references:
- example: G 50 - 2 XX - S
- G = Genesis Blower
- 50 = Power: 50 = 500W; 70 = 700 W; 90 = 900 W; 120 = 1200 W
- 2 = Voltage: 230-240-50 Hz
- XX = Model (Electronic, Pneumatic, heating, Variable speed..): See table below
| GENESIS HYDRO-AIR BLOWER MODELS |
| Article Reference | Power (Watts) | Integrated Heating Power | Total Power | V / Hz |
| G50-2HN-S | 500 W | 250 W | 750 W | 230 - 240V / 50-60 Hz |
| G70-2HN-S | 700 W | 250 W | 950 W | 230 - 240V / 50-60 Hz |
| G90-2HN-S | 900 W | 250 W | 1150 W | 230 - 240V / 50-60 Hz |
G70-2VH-S (Variable speed electronic heating blower) | 700 W | 250 W | 950 W | 230 - 240V / 50-60 Hz |
Genesis Blower References:
| NN | Standard Electronic Blower / controlled via control panel |
| AN | Pneumatic Blower / controlled via pneumatic button |
| HN | Electronic Blower with integrated heating element to prevent cold air from entering the spa |
| AH | Pneumatic Blower with integrated heating element to prevent cold air from entering the spa |
| VN | Variable speed Electronic Blower. To be used with special touch UK01658A directly connected to the blower. See operating instructions below "VH" |
| VH | Variable speed Electronic Blower with "pulsed effect" massage mode and integrated heating element to prevent cold air from entering the spa. To be used with special touch UK01658A directly connected to the blower. Operating instructions for "VN" and "VH":- Press On = High speed
- Press +/- = Increase/decrease blower speed
- Press ~ = "Pulsed effect" massage mode
- Press Off = Turn off the blower
|
| VNT | 3-speed Electronic Blower. To be used with an On/Off touch or LED button. See operating instructions below "VHT" |
| VHT | 3-speed Electronic Blower. With "pulsed effect" massage mode and integrated heating element to prevent cold air from entering the spa. To be used with an On/Off touch or LED button. Operating instructions for "VNT" and "VHT"- 1st button press = High speed
- 2nd press = Medium speed
- 3rd press = Low speed
- 4th press = "Pulsed effect" massage mode
- 5th press = Turn off the blower
Automatic safety mode: cuts off the blower after 30 minutes, simply press the button to restart. |
| ANT* | 3-speed Pneumatic Blower with "pulsed effect" massage. To be used with a standard pneumatic push-button. See operating instructions below "AHT" |
| AHT* | 3-speed Pneumatic Blower with "pulsed effect" massage, with integrated heating element to prevent cold air from entering the spa. To be used with a standard pneumatic push-button. Operating instructions for "VNT" and "VHT"- 1st button press = High speed
- 2nd press = Medium speed
- 3rd press = Low speed
- 4th press = "Pulsed effect" massage mode
- 5th press = Turn off the blower
Automatic safety mode: cuts off the blower after 30 minutes, simply press the button to restart. |
*The pre-programmed mode can be modified via jumpers inside the blower to change the order of functions or eliminate the pipe drying function.