12V LED Driver for Spa – Model RQ-LED-10A
The RQ-LED-10A driver is designed to reliably power spa LED lighting. It accepts a 240V mains input or a 12V DC input and delivers up to 10A through its 12V outputs, suitable for LED strips or modules.
Main Features
- Mains input: 1 × 240V (AC)
- Secondary input: 12V (DC)
- 2 × 12V outputs for LED lighting, up to a total of 10A
- Designed for spa/wellness applications (ambient lighting, LED strips, etc.)
Target Use & Installation
This driver is especially suitable for spa owners looking to upgrade their LED lighting system without replacing the entire setup. It allows the existing structure to be retained while adding efficient LED lighting.
Installation should be performed by a qualified professional. Always disconnect power before proceeding. Ensure that all connected LED strips or modules operate on 12V and do not exceed the total 10A output capacity.
| Specifications | Details |
|---|
| Model | RQ-LED-10A |
| Type | LED driver / spa lighting controller |
| Mains input | 1 × 240V AC |
| 12V input | 1 × 12V DC |
| LED outputs | 2 × 12V outputs, up to a total of 10A |
| Application | LED lighting for spa/whirlpool |
FAQ
Can I use this driver to add an LED strip to my spa?
Yes, as long as the lighting runs on 12V and the total power draw of your strips/modules does not exceed 10A. Always verify your configuration before purchase.
Can it be used as the main power supply for the spa?
No. This driver is strictly for 12V LED lighting (strips/modules). Any other components like pumps or heaters require dedicated equipment.
Should I install a fuse or circuit breaker?
Yes. Although the driver supports up to 10A, you should follow local electrical regulations and include appropriate protection (e.g., differential circuit breaker + fuse or 10–16A breaker depending on your setup).
What if I need more power than one driver provides?
You can add a second identical driver or upgrade to a higher-capacity model if available. Do not exceed the 10A limit per unit.